EVP61 - Range hood CDA - Free user manual and instructions
Find the device manual for free EVP61 CDA in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Range Hood |
| Brand | CDA |
| Model | EVP61 |
| Dimensions (W x D x H) | 600 mm x 500 mm x 150 mm |
| Weight | 12 kg |
| Power Supply | 220-240 V ~ 50 Hz |
| Motor Power | 150 W |
| Max Extraction Rate | 650 m³/h |
| Noise Level (Max) | 55 dB |
| Number of Speeds | 3 |
| Grease Filter Type | Aluminum mesh (washable) |
| Carbon Filter | Optional for recirculation mode |
| Lighting | LED, 2 x 1.5 W |
| Controls | Slider switch |
| Duct Diameter | 150 mm |
| Installation Type | Wall-mounted or built-in |
| Energy Class | A |
| Warranty | 2 years |
| Maintenance | Clean grease filters monthly; replace carbon filter every 6 months |
| Safety Features | Thermal cut-off, manual reset |
Frequently Asked Questions - EVP61 CDA
How do I install the CDA EVP61 range hood?
Installation should be carried out by a qualified professional. Ensure the hood is mounted at least 65 cm above the hob. Follow the user manual for detailed steps on wall mounting and duct connection.
How often should I clean the grease filters?
Clean the aluminum mesh grease filters at least once a month. They are dishwasher safe or can be hand washed with mild detergent. Allow to dry completely before reinstalling.
How do I replace the carbon filter?
If using recirculation mode, replace the carbon filter every 6 months. To replace, remove the grease filter, then slide out the old carbon filter and insert a new one. Ensure proper fit.
Why is my range hood making excessive noise?
Excessive noise may be due to loose installation, blocked ductwork, or a dirty filter. Check that the hood is securely mounted, clean the grease filter, and ensure the duct is not obstructed. If noise persists, contact service.
What should I do if the hood does not turn on?
Check the power supply and ensure the plug is connected. Verify the circuit breaker hasn't tripped. If the hood still doesn't operate, the thermal cut-off may have activated; allow the motor to cool and reset manually if needed.
How do I change the LED lights?
The LED lights are integrated and should be replaced by a qualified technician. If they fail, contact CDA customer service for assistance.
Can I use the hood in recirculation mode without a duct?
Yes, the hood can be used in recirculation mode if a carbon filter is installed. Ensure the charcoal filter is fitted before switching to recirculation. The air will be filtered and returned to the kitchen.
What are the dimensions of the EVP61?
The dimensions are 600 mm wide, 500 mm deep, and 150 mm high. These measurements include the body but not the chimney or decorative cover.
How do I clean the exterior of the hood?
Wipe the exterior with a soft damp cloth and mild detergent. Avoid abrasive cleaners or scouring pads. Dry with a soft cloth to prevent water marks.
Where can I find spare parts for my CDA EVP61?
Spare parts such as filters, bulbs, and motor parts can be ordered from CDA authorized dealers or via the official website. Use the model number EVP61 when ordering.
User questions about EVP61 CDA
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Range hood in PDF format for free! Find your manual EVP61 - CDA and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. EVP61 by CDA.