ECN91SS - Range hood CDA - Free user manual and instructions
Find the device manual for free ECN91SS CDA in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Range Hood |
| Brand | CDA |
| Model | ECN91SS |
| Width | 90 cm (approx.) |
| Mounting Type | Wall-mounted / Chimney |
| Material | Stainless Steel |
| Control Type | Push buttons or Electronic |
| Number of Speeds | 3-4 speeds |
| Extraction Rate (Max) | Up to 700 m³/h |
| Noise Level (Max) | Approx. 65 dB(A) |
| Lighting | 2 x 50W Halogen or LED |
| Filter Type | Grease filter (aluminum or mesh) |
| Ducted / Recirculation | Ducted (optional charcoal filter for recirculation) |
| Power Supply | 220-240 V ~ 50 Hz |
| Energy Class | A (typical) |
| Annual Energy Consumption | Approx. 50-70 kWh/year |
| Grease Filter Efficiency | Class B or C (typical) |
| Fluid Dynamic Efficiency | Class A or B (typical) |
| Lighting Efficiency | Class A (typical) |
| Weight (approx.) | 15-20 kg |
| Cleaning | Grease filter washable; exterior with mild detergent |
| Warranty | 2 years (subject to registration) |
Frequently Asked Questions - ECN91SS CDA
How do I install the CDA ECN91SS range hood?
Installation should be carried out by a qualified professional. Ensure the hood is mounted at a minimum height of 65 cm above electric hobs and 75 cm above gas hobs. Secure the chimney bracket to the wall and connect the ducting for extraction or prepare for recirculation.
How do I clean the grease filters?
The grease filters can be hand washed with warm water and mild detergent, or placed in the dishwasher at a low temperature. Dry them thoroughly before reinserting. Replace if damaged.
Can the hood be used in recirculation mode?
Yes, the ECN91SS can be used in recirculation mode with an optional charcoal filter that absorbs odors. The charcoal filter needs to be replaced every 3-6 months depending on usage.
How do I replace the light bulbs?
Switch off the power supply. Remove the lamp cover or bulb by gently twisting. Replace with a bulb of the same type and wattage (e.g., 50W halogen or equivalent LED). Ensure it is securely fitted before restoring power.
Why is my hood making excessive noise?
Check if the filters are clean and properly installed. Loose ductwork or blockages can also cause noise. Ensure the hood is securely mounted. If noise persists, contact customer support.
What size ducting does the hood require?
The hood typically requires a ducting diameter of 150 mm or 120 mm. Use smooth, rigid ducting for best performance and keep the duct run as short as possible with minimal bends.
How do I reset the filter alarm?
After cleaning or replacing the filters, press and hold the timer button (or specific button) for 3-5 seconds until the indicator light turns off. Refer to the manual for exact button location.
Can I install a carbon filter for recirculation?
Yes, the hood is compatible with carbon filters for recirculation mode. You need to purchase a separate carbon filter kit. Follow the installation instructions in the manual to fit the filter above the grease filter.
What maintenance does the hood require?
Regular maintenance includes cleaning the grease filters monthly, replacing the charcoal filter (if used) every 3-6 months, and wiping the exterior with a damp cloth. Check ducting for blockages periodically.
The hood does not turn on. What could be wrong?
Ensure the hood is plugged in and the power supply is on. Check the circuit breaker. If the motor is overheated, it may have a thermal cut-out; let it cool down. If none of these help, contact a qualified technician.
User questions about ECN91SS CDA
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Range hood in PDF format for free! Find your manual ECN91SS - CDA and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ECN91SS by CDA.