inMotion Slim IM500V4 - Docking Station ALTEC LANSING - Free user manual and instructions

Product Type	Docking Station with Alarm Clock & Speaker
Brand	Altec Lansing
Model	inMotion Slim IM500V4
Compatible Devices	iPod, iPhone (30-pin connector)
Speaker Type	Stereo, Full-range drivers with passive radiators
Power Output	4W total (2W per channel)
Power Source	AC adapter (included) or 4x AAA batteries for backup
Dimensions (W x H x D)	12.7 x 3.8 x 2.5 in (323 x 97 x 64 mm)
Weight	1.8 lb (0.82 kg)
Alarm Features	Dual alarm, snooze, wake to iPod/iPhone or buzzer
Audio Inputs	3.5mm auxiliary input for other devices
Controls	Touch-sensitive controls on top, remote control included
Display	LCD clock display with adjustable brightness
Battery Backup	Preserves clock and alarm settings during power outage
Charging	Charges iPod/iPhone while docked
Cleaning	Wipe with dry cloth; avoid liquids and abrasives
Safety	Use only supplied AC adapter; do not expose to moisture
Spare Parts & Repairability	Contact Altec Lansing support for replacement AC adapter or remote control
General Information	Designed for bedside use; automatic time sync via iPhone

Frequently Asked Questions - inMotion Slim IM500V4 ALTEC LANSING

Which iPod/iPhone models are compatible with the Altec Lansing inMotion Slim IM500V4?

The IM500V4 supports all iPods and iPhones with the classic 30-pin connector. For iPhone models, ensure iOS version is compatible. Later devices with Lightning connector require an adapter.

Can I use the docking station without an iPod/iPhone for just the alarm clock?

Yes, the alarm clock and display function independently. You can set the alarm to buzzer mode and use it as a standard alarm clock without a device docked.

How do I set the time on the IM500V4?

The time can be set automatically when an iPhone is docked (if allowed via settings), or manually by pressing the Time Set button and using the +/- buttons to adjust hours and minutes.

What power options are available? Can I use batteries?

The unit runs on the included AC adapter. For battery backup (to retain clock/alarm settings during power loss), insert 4 AAA batteries (not included). Batteries do not power the speakers.

How do I clean the docking station?

Unplug the unit and wipe the exterior with a soft, dry cloth. Do not use any liquids, aerosol cleaners, or abrasive materials that could damage the surface.

The remote control is not working. What should I do?

First, replace the coin cell battery (CR2032) in the remote. Ensure the remote is pointed at the front IR sensor. If still not responding, try resetting the unit by unplugging it for 30 seconds.

Can I play music from a non-Apple device through this speaker?

Yes, use the 3.5mm auxiliary input on the back of the unit. Any audio device with a headphone jack can be connected via a standard aux cable.

Why is the display very dim or not showing anything?

Check that the unit is plugged in and the AC adapter is securely connected. If using battery backup, ensure batteries are fresh. Adjust display brightness using the Dimmer button.

How do I reset the docking station to factory settings?

Unplug the AC adapter and remove batteries (if any). Wait 30 seconds, then reconnect power. This clears all settings and resets the clock and alarm.

Where can I find a replacement AC adapter or remote control?

Contact Altec Lansing customer support or visit the official website for spare parts. Use only the specified adapter (output: 5V DC, 1A) to avoid damage.

USER MANUAL inMotion Slim IM500V4 ALTEC LANSING

FCC Instructions for a Class B digital device or peripheral

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This Class B digital apparatus complies with Canadian ICES-003.

The lightning flash with arrowhead, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

Caution: To prevent the risk of electric shock, do not remove cover (or back). No user-serviceable parts inside. Refer servicing to qualified service personnel.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

CAUTION

To prevent electric shock do not use this (polarized) plug with an extension cord, receptacle or other outlet unless the blades can be fully inserted to prevent blade exposure.

WARNING

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

CONNECTING THE POWER CORD (AC WALL SOCKET)

Snap plug into power supply and then insert the blades into the outlet. Please note, the InMotion IM500 can also be powered with six AAA (LR03) batteries (not included).

IMPORTANT SAFETY INSTRUCTIONS

1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all Instructions.
5. Do not use this apparatus near water — This apparatus shall not be exposed to dripping or splashing, and no objects filled with liquids, such as vases, shall be placed on the apparatus.

6. Clean only with dry cloth.

7. Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. The apparatus should not be situated on a bed, sofa, rug or similar surface that may block the ventilation openings. The apparatus must not be placed in a built-in installation, such as a closed bookcase or cabinet that may impede the flow of air through the ventilation openings. Ventilation should not be impeded by covering the openings with items such as newspapers, tablecloths, curtains, etc.

8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

9. No naked flame sources, such as lighted candles, should be placed on the apparatus.

10. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for the replacement of the obsolete outlet.

11. Protect the power cord from being walked on or pinched — particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

12. Do not install in an area which impedes the access to the power plug. Disconnecting the power plug is the only way to completely remove power to the product and must be readily accessible at all times.

13. Power source — Use only power supplies of the type specified in the operating instructions or as marked on the appliance. If a separate power supply is included with this apparatus, do not substitute with any other power supply — use only manufacturer-provided power supplies.

14. Unplug this apparatus during lightning storms or when unused for long periods of time.

15. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. For service, refer to qualified service personnel, return to the dealer, or call the Altec Lansing service line for assistance.

16. For products which incorporate batteries, please refer to local regulations for proper battery disposal.

17. Only use attachments/accessories specified by the manufacturer.

18. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

ALTEC LANSING TECHNOLOGIES, INC. ONE YEAR LIMITED WARRANTY (TWO-YEAR LIMITED WARRANTY IN THE EUROPEAN UNION AND ASIA)

What Does The Warranty Cover?: Altec Lansing warrants that its products shall be free from defects in materials or workmanship, with the exceptions stated below.

What Is The Period Of Coverage?: For units purchased in European Union or Asia, this warranty runs for two years from the date of purchase. For units not purchased in Europe or Asia, this warranty runs for one year from the date of purchase. The term of any warranties implied by law shall expire when your limited warranty expires. Some states and/or Member States in the European Union do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you.

What Does The Warranty Not Cover?: This warranty does not cover any defect, malfunction or failure that occurs as a result of: improper installation; misuse or failure to follow the product directions; abuse; or use with improper, unintended or faulty equipment. (For information on proper installation, operation and use consult the manual supplied with the product. If you require a replacement manual, you may download a manual from www.alteclansing.com.) Also, consequential and incidental damages are not recoverable under this warranty. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you.

What Will Altec Lansing Do To Correct The Problem?: Altec Lansing will, at its option, repair or replace any product that proves to be defective in material or workmanship. If your product is no longer being manufactured, or is out of stock, at its option, Altec Lansing may replace your product with a similar or better Altec Lansing product.

How To Get Warranty Service: To get a covered product repaired or replaced, you must contact Altec Lansing during the warranty period by email ([e-mail]). You must include in your email, your name, address, email address, telephone number, date of purchase and a complete description of the problem you are experiencing. In the United States, you may alternatively contact Altec Lansing by telephone at 1-800-ALTEC88 — please be prepared to provide the same information. If the problem appears to be related to a defect in material or workmanship, Altec Lansing will provide you a return authorization and instructions for return shipment. Return shipments shall be at the customer's expense, and the return must be accompanied by the original proof of purchase. You should insure the shipment as appropriate because you are responsible for the product until it arrives at Altec Lansing.

How Will State Law Affect Your Rights?: This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. Please note that in the European Union, you as a consumer might have other legal rights under national legislation of European Union Member States governing the sale of Altec Lansing's goods. Those rights are not affected by this guarantee.

The above limited warranties and remedies are sole warranties and remedies available to purchaser, if, and to the extent, valid and enforceable under the applicable law.

CUSTOMER SERVICE

The answers to most setup and performance questions can be found in the Troubleshooting guide. You can also consult the FAQs in the customer support section of our Web site at www.alteclanslng.com. If you live in North America and still can't find the information you need, please call our customer service team for assistance before returning the speakers to your retailer under their return policy.

Tel: [phone]

Email: [e-mail]

If you live outside of North America, please visit our website at www.alteclansing.com and select your region to locate your country's distributor.

For the most up-to-date information, be sure to check our Web site at www.alteclansing.com.

INTERNATIONAL DISTRIBUTION

International customers: For information regarding the distribution of Altec Lansing products in your country, please visit www.alteclansing.com and click on your region.

DISPOSAL OF OLD ELECTRICAL & ELECTRONIC EQUIPMENT

This symbol on the product or on its packaging indicates that this product shall not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be

caused by inappropriate waste handling of this product. The recycling of materials will help to conserve natural resources. For more detailed information about recycling of this product, please contact your local city office or your household waste disposal service.

IN MOTION IM 500 MOBILE AUDIO

Thank you for purchasing this Altec Lansing product. For generations, Altec Lansing has been first in audio innovation. Today, our line of powered speakers has received more performance awards than any other brand. In all kinds of environments, in every price range, Altec Lansing offers sound of distinction — giving even the most demanding customers the audio enjoyment they seek. Just listen to this!

Box Contents

• inMotion iM500 mobile speaker system
- Power supply
• Cable adapter for other players
- Protective carry pouch
- User's guide and quick connect instructions

Made for:

- iPod nano

Placing the inMotion IM500

Position the inMotion iM500 on a level surface, preferably close to you (within three feet).

Power

Use one of the following two options to power your inMotion iM500:

AC (Wall outlet) Power

Insert the barrel connector from the power supply into the DC connector on the rear of the inMotion iM500. After this connection is made, insert the power supply into a wall outlet.

DC (Battery) Power

Install six AAA (LR03) batteries (not included) into the battery compartments in the rear of the inMotion iM500 (three to each compartment). Make sure the batteries are installed as illustrated in the battery compartments.

Start Playing

1. Turn on your iPod nano.
2. Turn on the inMotion iM500 by pushing the power button located to the left of the iPod dock. A blue LED will light near the button when the power is on. Note: To avoid hearing a popping sound when you turn on your inMotion iM500, always turn on your audio source first.

Power Off

Turn off the inMotion iM500 by pushing the power button located to the left of the iPod dock. The LED will turn off.

Auto Shut-down (Stand by)

If no audio is detected for about three minutes, the inMotion iM500 will automatically shut down.

Connecting to alternate audio source

The inMotion iM500 system includes an auxiliary input jack that allows you to connect to alternate audio sources, such as non-dockable iPod players, CD players, MP3 players, portable DVD players, and laptops. To connect the iM500 to an alternate audio source, follow the steps below.

1. Locate the cable adapter for other players.
2. Connect the small end (2.5mm) of the cable adapter to the auxiliary input jack (AUX) located on the back of the inMotion iM500 system, and the larger end (3.5mm) to the headphone or line out jack on your alternate audio device.
3. Set the volume on the audio source at mid-level.
4. Set the volume on the inMotion iM500 at minimum level and adjust upward to a comfortable listening level.

Volume

The “+” and “-” buttons located to the right of the iPod dock control the master volume. Press and hold the “+” button to increase the volume and the “-” button to decrease the volume.

Troubleshooting

Symptom Possible Problem Solution

The Power LED is not lit (AC Operation).	The power supply cord isn't connected to a wall outlet and/or the power supply connector is not plugged into the power supply jack on the back of the inMotion iM500.	Insert the barrel connector from the power supply into the DC connector on the back of the inMotion iM500. After this connection is made, insert the power supply into a wall outlet.
	The surge protector (if used) isn't powered on.	If the power supply cord is plugged into a surge protector, make sure the surge protector is switched on.
	The wall outlet is not functioning.	Plug another device into the same wall outlet to confirm the outlet is working.
	The power isn't turned on.	Turn on the inMotion iM500 by pushing the power button located to the left of the iPod dock. A blue LED will light around the button when the power is on.
Symptom Possible Problem Solution
The Power LED is not lit (Battery Operation).	No batteries are installed.	Install six AAA (LR03) batteries (not included) into the battery compartments in the rear of the inMotion iM500 (three to each compartment). Make sure the batteries are installed as illustrated in the battery compartments.
	The power isn't turned on.	Turn on the inMotion iM500 by pushing the power button located to the right of the iPod dock. A blue LED will light around the button when the power is on.
No sound is coming from speakers.	The volume is set too low.	The “+” and “-” buttons located to the right of the iPod dock control the master volume. Press and hold the “+” button to increase the volume.
		Check the volume level on alternate audio source device and set at mid-level.
	The iPod nano is not correctly seated into the docking station.	Turn off the iPod nano, remove it from the docking station, reseat it, and turn it on again.
	If using an alternate audio source, the audio source is not properly connected to the inMotion iM500 or there is a problem with the alternate audio source.	Connect an alternate audio source — such as non-dockable iPod players, CD players, MP3 players, portable DVD players, and laptops — to your inMotion iM500 by connecting the small end (2.5mm) of the cable adapter to the auxiliary input jack (AUX) located on the back of the inMotion iM500 system, and the larger end (3.5mm) to the headphone or line out jack on your alternate audio device.Set the volume on the audio source at mid-level.Set the volume on the inMotion iM500 at minimum level and adjust upward to a comfortable listening level.
There is a crackling sound coming from speakers.	The iPod nano is not correctly seated into the docking station.	Turn off the iPod nano, remove it from the docking station, reseat it, and turn it on again.
	If using an alternate audio source, the audio source is not properly connected to the inMotion iM500 or there is a problem with the alternate audio source.	Connect an alternate audio source — such as non-dockable iPod players, CD players, MP3 players, portableDVD players, and laptops — to your inMotion iM500 by connecting the small end (2.5mm) of the cable adapter to the auxiliary input jack (AUX) located on the back of the inMotion iM500 system, and the larger end (3.5mm) to the headphone or line out jack on your alternate audio device.Set the volume on the audio source at mid-level.Set the volume on the inMotion iM500 at minimumlevel and adjust upward to a comfortable listening level.
There is a crackling sound coming from speakers (when connected to PC or laptop).	The operating system's volume level is set too high.	Check the operating system volume level and decrease it if necessary.
The sound is distorted.	The inMotion iM500's volume level is set too high.	The “+” and “-” buttons located to the right of the iPod dock control the master volume. Press and hold the “-” button to decrease the volume.
There is radio interference.	The unit is too close to a radio tower.	Move the unit to see if the interference goes away.
Intermittent buzzing.	The unit is located too close to a GSM cell phone.	Move the GSM cell phone away from the unit.