SW-10 II - Subwoofer KLIPSCH - Free user manual and instructions
Find the device manual for free SW-10 II KLIPSCH in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Powered Subwoofer |
| Brand | Klipsch |
| Model | SW-10 II |
| Woofer Size | 10 inches |
| Amplifier Power | 200 Watts RMS |
| Frequency Response | 25 Hz - 120 Hz |
| Maximum Output | 108 dB |
| Input Connections | RCA Line Level, LFE |
| Controls | Volume, Crossover (40-120 Hz), Phase (0/180°), Auto On/Off |
| Protection | Thermal, Short Circuit, Overload |
| Enclosure Type | Bass-Reflex (ported) |
| Cabinet Finish | Black Wood Grain Vinyl |
| Dimensions (W x H x D) | 14.5 in x 16.1 in x 18.2 in |
| Weight | 31.5 lb |
| Power Consumption | 500W Peak, 50W Idle |
| Standby Power | < 5W |
| Fuse Rating | 2.5A 250V |
| Cleaning Instructions | Wipe with dry cloth. Do not use solvents. |
| Safety Certifications | CE, UL, FCC |
Frequently Asked Questions - SW-10 II KLIPSCH
How do I connect the SW-10 II to my AV receiver?
Use a single RCA cable from the subwoofer pre-out on your receiver to the LFE input on the subwoofer. Set the receiver's subwoofer settings to 'Yes' and crossover to 80 Hz.
What is the best placement for the subwoofer?
Place the subwoofer in a corner or along a wall to maximize bass output. Avoid placing it too close to walls to prevent booming. Experiment with location for optimal sound.
How do I set the crossover frequency?
Set the subwoofer's crossover knob to the same frequency as your speakers' lower limit (typically 80 Hz for THX standards). Adjust based on your room's acoustics.
What does the phase switch do?
The phase switch (0/180°) aligns the subwoofer's output with your main speakers. Start at 0 and switch to 180 if bass sounds weaker or lacks integration.
Why is my subwoofer not turning on?
Check that the power cord is plugged in and the fuse is intact. Ensure the auto-on switch is enabled and signal is present. If still off, try a different power outlet.
How do I clean the subwoofer?
Unplug the unit and wipe the cabinet with a soft, dry cloth. Do not use abrasive cleaners or liquids. Vacuum the grill gently if dusty.
Can I use the subwoofer for music and home theatre?
Yes, the SW-10 II is designed for both music and movie playback. Adjust settings like volume and crossover per your preference.
What is the warranty on this subwoofer?
Klipsch typically offers a 2-year warranty for subwoofers. Check your purchase documentation for exact terms.
How do I replace the fuse?
Unplug the power cord. Use a small flathead screwdriver to open the fuse drawer near the power inlet. Replace with a 2.5A 250V slow-blow fuse. Close drawer and plug in.
What is the recommended speaker impedance?
The subwoofer has a built-in amplifier, so it does not require speaker impedance matching. It accepts line-level signals from any receiver.
User questions about SW-10 II KLIPSCH
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Subwoofer in PDF format for free! Find your manual SW-10 II - KLIPSCH and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SW-10 II by KLIPSCH.
