SW-100-08P - Network switch Luxul - Free user manual and instructions

Product Type	Managed Network Switch
Model	SW-100-08P
Brand	Luxul
Number of Ports	8
Port Speed	10/100/1000 Mbps
PoE Support	Yes, 802.3af/at
PoE Power Budget	120 W
Switching Capacity	16 Gbps
Form Factor	Rack-mountable, 1U
Dimensions	17.3 x 1.7 x 8.3 inches
Weight	3.5 lbs
Power Supply	Internal, 100-240V AC
Cooling	Fanless
Management	Web interface, CLI
VLAN Support	802.1Q VLAN
QoS	Yes
Installation	Desktop or rack mount
Operating Temperature	0°C to 40°C
Compliance	FCC, CE

Frequently Asked Questions - SW-100-08P Luxul

How to reset the Luxul SW-100-08P to factory defaults?

Locate the reset button on the front panel. Press and hold it for about 10 seconds until the system LEDs blink. Release the button. The switch will reboot with factory settings.

Does the SW-100-08P support PoE+?

Yes, it supports IEEE 802.3af and 802.3at (PoE+) on all ports, with a total power budget of 120 W.

What is the maximum power per port for PoE?

Each port can deliver up to 30 W according to the 802.3at standard.

Can I mount this switch on a wall?

The switch is designed for desktop or rack mounting. For wall mounting, please use a suitable rack shelf or bracket as it does not have direct wall-mount holes.

How to configure VLANs on the SW-100-08P?

Access the web interface via the default IP address (192.168.1.1). Go to VLAN settings, enable 802.1Q, create VLANs, and assign ports accordingly.

What is the default username and password?

The default login credentials are username 'admin' and password 'admin'. It is strongly recommended to change them on first login.

Does the switch support link aggregation?

Yes, the SW-100-08P supports static link aggregation (port trunking) for increased bandwidth and redundancy.

How do I upgrade the firmware?

Download the latest firmware from the Luxul support page. Log into the web interface, navigate to System > Firmware Upgrade, select the file, and apply. Do not power off during upgrade.

Is the switch fanless?

Yes, the SW-100-08P is fanless, making it silent and suitable for noise-sensitive environments.

What type of cable is recommended for 1 Gbps connections?

Use Category 5e or higher Ethernet cables for optimal gigabit performance.

USER MANUAL SW-100-08P Luxul

Setting up your switch:

1. Place your new switch in the desired location
2. Attach and plug in power supply
3. Uplink to your network
4. Attach devices via Ethernet cable

graph TD
    A["2"] --> B["Attach Power"]
    B --> C["4"]
    C --> D["Connect Client Devices"]
    D --> E["5"]
    E --> F["Connect Network"]
    style A fill:#f9f,stroke:#333
    style B fill:#ccf,stroke:#333
    style C fill:#cfc,stroke:#333
    style D fill:#fcc,stroke:#333
    style E fill:#cff,stroke:#333
    style F fill:#ffc,stroke:#333

What if...

I need to restart my switch?

To restart your switch, unplug it for 5 seconds.

What do the LEDs on the switch indicate?

Indicator	State	Description
POWER	Solid on	Switch is properly connected to power supply
	Off	Switch is disconnected from or not properly connected to power supply
LINK/ACT	Solid on	Port is connected properly
	Blinking	Data is being transmitted or received over port
	Off	Port is disconnected or not properly connected to a device

Copyright and Trademark Notices

No part of this document may be modified or adapted in any way, for any purposes without permission in writing from Luxul. The material in this document is subject to change without notice. Luxul reserves the right to make changes to any product to improve reliability, function, or design. No license is granted, either expressly or by implication or otherwise under any Luxul intellectual property rights. An implied license only exists for equipment, circuits and subsystems contained in this or any Luxul product.

© Copyright 2020 Legrand AV Inc. All rights reserved. The name Luxul, the Luxul logo, the Luxul logo mark and Simply Connected are all trademarks and or registered trademarks of Legrand AV Inc. All other trademarks and registered trademarks are property of their respective holders.

Technical Support

P: 801-822-5450

E: [e-mail]

For support chat go to: luxul.com

Sales

P: 801-822-5450

E: [e-mail]