XMS-7048P - Network switch Luxul - Free user manual and instructions
Find the device manual for free XMS-7048P Luxul in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Managed Gigabit PoE+ Switch |
| Model | XMS-7048P |
| Ports | 48 x 10/100/1000Base-T PoE+ (802.3at), 2 x SFP+ 10G uplink, 2 x 10GBase-T copper uplink |
| PoE Budget | 740W total PoE power budget |
| Switching Capacity | 176 Gbps |
| Forwarding Rate | 130.95 Mpps |
| Management | Web GUI, CLI, SNMP v1/v2c/v3, SSH, Telnet, RMON |
| Layer 2 Features | VLAN (802.1Q), STP/RSTP/MSTP, Link Aggregation (LACP), IGMP snooping, MLD snooping, Port Mirroring |
| Layer 3 Features | Static routing, RIP, OSPF, VRRP, DHCP relay |
| Security | 802.1X, ACL, Port Security, DHCP snooping, IP Source Guard, Dynamic ARP Inspection |
| Power Supply | Internal, 100-240V AC, 50-60Hz |
| Dimensions (W x D x H) | 17.3 x 14.5 x 1.75 inches (440 x 368 x 44 mm) |
| Weight | 9.5 kg (21 lbs) |
| Operating Temperature | 32° to 122°F (0° to 50°C) |
| Certifications | FCC Part 15 Class A, CE, RoHS |
| Cooling | Fan with variable speed, clean filter monthly |
| Mounting | 19-inch rack mountable (brackets included), desktop placement possible with rubber feet |
| LED Indicators | Power, System, PoE, Link/Activity per port |
| Warranty | Limited lifetime warranty |
Frequently Asked Questions - XMS-7048P Luxul
How do I reset the Luxul XMS-7048P to factory defaults?
Press and hold the reset button on the front panel for 10 seconds using a paperclip. The device will reboot with factory settings.
What is the maximum PoE power per port?
Each PoE port supports up to 30W (802.3at) with a total budget of 740W across all ports.
Can I use this switch for VLAN configuration?
Yes, the XMS-7048P supports 802.1Q VLAN tagging with up to 4096 VLAN groups.
How do I access the web management interface?
Connect to the switch via Ethernet and open a browser to the default IP address 192.168.1.1. Use default credentials admin/admin.
Does the switch support link aggregation?
Yes, it supports LACP (802.3ad) for up to 8 groups with up to 8 ports per group.
What are the supported SFP+ modules?
Use standard SFP+ modules for 10G Ethernet, such as Luxul SFP+ modules or compatible third-party ones.
How can I update the firmware?
Download the firmware from Luxul support, then upload it via the web interface under System > Firmware Upgrade.
What is the default username and password?
Default login is username 'admin' and password 'admin'. Change it after first login for security.
Is this switch fanless?
No, it has a variable-speed fan for cooling. Ensure proper ventilation.
Can I mount this switch on a wall?
The switch is designed for 19-inch rack mounting. For wall mounting, use a shelf bracket.
User questions about XMS-7048P Luxul
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Network switch in PDF format for free! Find your manual XMS-7048P - Luxul and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. XMS-7048P by Luxul.
USER MANUAL XMS-7048P Luxul
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Luxul
Model : XMS-7048P
Category : Network switch