M88 WP1 - Audio/video converter Audibax - Free user manual and instructions

Product Type	Audio/Video Converter
Brand	Audibax
Model	M88 WP1
Dimensions	Approx. 10 x 5 x 2 cm
Weight	Approx. 200 g
Power Supply	USB 5V DC
Input Ports	HDMI, VGA, AV
Output Ports	HDMI, VGA, AV
Supported Resolutions	Up to 1080p
Conversion Types	Analog to Digital, Digital to Analog
Audio Support	Stereo L/R RCA, 3.5mm jack
Plug and Play	Yes, no drivers required
Compatibility	PC, laptops, projectors, TVs
Housing Material	Plastic
Color	Black
LED Indicators	Power and signal status
Operating Temperature	0°C to 40°C
Storage Temperature	-20°C to 60°C
Maintenance	Clean with a dry, soft cloth. Do not use liquids.
Safety Precautions	Keep away from water and moisture. Do not open the device.
Spare Parts & Repairability	No user-serviceable parts. Contact support for repairs.
Included Accessories	USB power cable, user manual

Frequently Asked Questions - M88 WP1 Audibax

How do I connect the Audibax M88 WP1 to my TV?

Connect the converter to your source device (e.g., PC, DVD player) using the appropriate cable (HDMI, VGA, or AV). Then connect the converter to your TV using the corresponding output. Power the converter via USB and select the correct input on your TV.

Does the M88 WP1 support audio?

Yes, the device supports stereo audio through RCA or 3.5mm jacks. Ensure you connect the audio cables from your source to the converter and from the converter to your display or speakers.

Why is there no picture on my screen?

Check all cable connections. Ensure the converter is powered (LED should be lit). Verify that your source device is outputting a compatible signal (e.g., 1080p or lower). Try a different input port on your display.

Can I use this converter with a projector?

Yes, the M88 WP1 works with projectors that have HDMI, VGA, or AV inputs. Just connect accordingly and set the projector to the correct source.

Is the Audibax M88 WP1 plug and play?

Yes, it is plug and play. No additional drivers or software installation is required. Simply connect the cables and power it on.

What resolutions does the converter support?

The M88 WP1 supports resolutions up to 1080p (1920x1080). It may also support lower resolutions like 720p, 480p, etc.

Can I convert analog to digital with this device?

Yes, the M88 WP1 supports conversion from analog (e.g., VGA, AV) to digital (HDMI) and vice versa.

How do I clean the converter?

Use a dry, soft cloth to wipe the exterior. Do not use any liquids, sprays, or abrasive cleaners. Unplug the device before cleaning.

What should I do if the device gets wet?

Immediately unplug the device and allow it to dry completely in a warm, dry place. Do not use it until you are sure it is completely dry. If problems persist, contact Audibax support.

Is there a warranty for the M88 WP1?

Audibax typically offers a warranty. Check your purchase documentation or contact Audibax customer support for warranty terms and conditions.

USER MANUAL M88 WP1 Audibax

Close-up of a black rectangular object and a metallic circular knob on a white background (no text or symbols)

M88 WP1

Dante Wall Control Panel Panel de control de pared Dante

INDEX / ÍNDICE

ENGLISH

WELCOME TO AUDIBAX....1

SAFETY INSTRUCTIONS....1

IMPORTANT INFORMATION......2

PACKAGE CONTENT....3

SPECIFICATION......3

FEATURES....3

PANEL SETTING....3

WORK BOARD....7

M88WP1 PANEL CONFIGURATION....8

OLED SCREEN....10

OPERATION STEPS OF PANEL....10

DISPOSAL....11

ESPAÑOL

BIENVENIDOS A AUDIBAX....12

Thank you very much for choosing Audibax. We hope you enjoy your new product.

It has been developed and designed paying attention to the smallest details, with quality control with European standards supervised by our great team of professional technicians, who work every day to offer our customers the best quality.

We make sure that every Audibax product is built to last long. All our references are made with long lasting materials and our specialists are dedicated to constantly doing quality controls to guarantee the best result.

Please read carefully this manual in order to use your Audibax product in the best way. Do not hesitate to visit our website for further information: www.audibax.com

SAFETY INSTRUCTIONS

GENERAL INFORMATION

• It is important to read and follow the instructions carefully.
• Keep all information and instructions in a secure location.
• Always follow the instructions provided.
• Take note of all safety warnings and never remove them from the equipment.
• Use the equipment only as intended and for its intended purpose.
• Ensure that the stands and/or mounts used are sufficiently stable and compatible for fixed installations. Wall mounts should be properly installed and secured, and the equipment should be installed securely to prevent falls.
• When installing the equipment, be sure to observe the relevant safety regulations in your country.
• Do not install or operate the equipment near sources of heat, such as radiators, heat registers, or ovens, and ensure that it is always cooled sufficiently and cannot overheat.
• Do not place sources of ignition, such as burning candles, on the equipment.
• Keep ventilation slits unobstructed.
• For equipment designed for indoor use only should not be used near water, flammable materials, fluids, or gases. Special outdoor equipment should be used in accordance with the manufacturer's instructions.
• Ensure that no dripping or splashed water can enter the equipment and do not place containers filled with liquids on the equipment.
• Prevent objects from falling into the equipment.
• Use the equipment only with recommended accessories intended by the manufacturer.
• Do not attempt to open or modify the equipment.
• Check all cables after connecting the equipment to prevent accidents or damage due to tripping hazards.
• During transport, take steps to prevent the equipment from falling and causing damage or injury.
• If the equipment is not functioning properly, fluids or objects have gotten inside, or is otherwise damaged, switch it off immediately and unplug it from the power outlet (if applicable). Only authorized, qualified personnel should repair the equipment.
• Clean the equipment with a dry cloth.
• Comply with all applicable disposal laws and separate plastic and paper/cardboard during packaging disposal.
• Keep plastic bags out of the reach of children.

FOR DEVICES DESIGNED TO BE CONNECTED TO THE MAIN POWER SUPPLY:

• ATTENTION: If your equipment has a power cord with a grounding plug, it must be connected to a wall outlet with a ground connection. Never remove the grounding plug from the power cord.
• If your equipment has been exposed to extreme temperature changes, allow it to reach room temperature before turning it on. Otherwise, moisture and condensation may damage the equipment.
• Before plugging in the equipment, make sure that the voltage and frequency of the power outlet match the specifications of the equipment. If the equipment has a voltage selector, only connect it to the power outlet if the values match. If the power cord or adapter does not fit your outlet, contact an electrician.
• Do not step on the power cord. Make sure it is not pinched at the outlet, adapter, or equipment connection.
• Keep the power cord or adapter within reach and disconnect the equipment from the power supply when not in use or when cleaning it. Always unplug the cord or adapter by pulling the plug or adapter, not the cord. Never touch the cord or adapter with wet hands.
• Avoid frequently turning the equipment on and off, as this can reduce its useful life.
• IMPORTANT: Only replace fuses with those of the same type and rating. If a fuse repeatedly blows, contact an authorized service center.
• To completely disconnect the equipment from the power mains, unplug the power cord or adapter from the outlet.
• If your device has a Volex power connector, the mating Volex connector must be unlocked before it can be removed. Be careful when laying cables, as the equipment can slide or fall if the power cord is pulled.
• Unplug the power cord or adapter before an extended period of disuse or in case of lightning strike risk.
• Only install the equipment when it is disconnected from the power source.
• To prevent damage and overheating, qualified personnel should regularly clean and service the equipment depending on ambient conditions like dust, nicotine, and fog.

If the product contains the following symbols, please, read carefully:

CAUTION: To reduce the risk of electric shock, do not remove cover (or back). There are no user serviceable parts inside. Maintenance and repairs should be exclusively carried out by qualified service personnel.

The warning triangle with lightning symbol indicates dangerous uninsulated voltage inside the unit, which may cause an electrical shock.

The warning triangle with exclamation mark indicates important operating and maintenance instructions.

IMPORTANT INFORMATION

CAUTION! HIGH VOLUMES IN AUDIO PRODUCTS!

This equipment is designed for professional purposes and its commercial use must comply with the applicable national rules and regulations for accident prevention.

As the manufacturer of this product, Audibax has the responsibility to inform you about the potential health risks associated with its use. One such risk is hearing damage caused by prolonged exposure to high volume.

When this product is in use, it can generate high sound-pressure levels that may cause irreversible hearing damage to performers, employees, and audience members.

To prevent this, it is important to avoid exposing yourself or others to volumes exceeding 90 dB for an extended period of time.

PACKAGE CONTENT

1 x M88 WP1

1x User's manual

SPECIFICATION

• Multifunction encoder: 1
• Control protocol: UDP RJ45 communication protocol
• Address setting method: TCP/IP
• Signal cable length: Up to 100 meters
• Power supply: POE power supply
• Connection port: RJ-45
• Power consumption: <100 mw
• White color
• Material: aluminum alloy.

FEATURES

• OLED control interface, with multi-function encoder.
• Open architecture programming.
• Supports protocols, UDP, RS232/485.
• Feeding through. RJ45 (PoE).
• Supports 32 menus.

PANEL SETTING

The Audibax M88WP1 and M88WP2 control panels work in the NexusX ecosystem, said ecosystem generates a control network to design, program and work with the panels in an IP-based communication "NetWork" NETWORK environment, connect as many panels as you need to a Switch or Router with PoE power, assign functions or work address in a simple and graphic way.

Pairing and network assignment of panels:

NexusX Pannel Settings chapter.

Within the NexusX ecosystem, you can operate the panels and configure them in 2 ways:

1. Standalone (without the need for physical machines connected to the network)

2. Online (with network operating machines)

Standalone mode

Run NexusX, and select an array to create a project, select the + symbol to add a drive

• Control interface with 8 scenes and multi-function encoder.
• Open architecture programming.
• Supports protocols, UDP, RS232/485.
• Feeding through. RJ45 (PoE).

Select the M88DSP/M88DSP Dante model, in the drop-down menu unit 1 for example you will have access to the complete configuration environment of the entire ecosystem in Standalone mode.

In the system settings section, open the drop-down menu and select PannelSettings or press (Control+P).

Inside the panel, you will have in the left area, panels and control units to add to the board, where you can load M88WP2, M88WP1 units and M88 control units.

On the right side of the panel, we have the drives that are online in the system, whether network mapped or unassigned.

Within the panel options, we have, search for online units, assign address within the network (Set IP).

Since the WP2 and WP1 units, by default, are assigned with an IP range and base network, in this section you can configure IP, Network Mask and gateway.

WORK BOARD

On the work board, you can drag standalone units (left area) or online units (right area).

Drag the units you want to program to start assigning functions.

Within the work panel options we have 4 options marked by icons:

• Save project
• Open project
• Dump project
• Clear board

M88WP1 PANEL CONFIGURATION

Drag the panel link icon to the unit you want to control with the mouse pointer.

Double click on the panel icon to enter the work menu.

The M88WPI control panel consists of a 1.3" Oled screen, and a multi-function management encoder, there are 5 types of menu within the configuration interface:

-Volume

-Button
- Preset
-Command
-Matrix

Close-up of a metallic knob with a black rectangular button labeled 'A' (no other text or symbols visible)

Click "add menu" to pop up menu selection box, choose corresponding menu and confirm it. After finishing the setting of software menu configuration, click toolbar download icon to download the configuration to panel hardware.

1. Display panel name and IP address on main interface and turn the knob left or right to switch menu.
2. Press the button on the knob, and the second row on menu interface starts to flash, which indicates that it enters edit mode.
3. Turn the knob left or right to change value.
4. Press the button on the knob again to edit mode and go back to menu mode.

Press double click on button 1 as in the example to access the different types of commands offered by the panel:

Among the options that can be assigned to each master button we will have:

Volume:

We can assign any audio input or output available on the unit, assign a name to the function, and the maximum and minimum volume range to program.

Button:

Mute function of an input, output or general channel

Preset:

Assign a working memory (up to 16 selectable)

Command:

Assign control commands, UDP, RS232 or RS485, to send commands to other units connected to the NexusX ecosystem

Among the options that can be assigned to each master button we will have:

Volume:

We can assign any audio input or output available on the unit, assign a name to the function, and the maximum and minimum volume range to program.

Button:

Mute function of an input, output or general channel

Preset:

Assign a working memory (up to 16 selectable)

Command:

Assign control commands, UDP, RS232 or RS485, to send commands to other units connected to the NexusX ecosystem

Matrix:

Preset source assignment, you can assign any type of crossover within the connected matrix options as well as different types of combinations available

Once the adjustment or assignment has been completed within the panel, and with all units in Network, press the "Uploadpanel" icon to send the entire scene to the assigned panel.

Circular icon with a green upward arrow symbol on a dark background (no text or numbers)

M88WP1 PANEL

OLED screen consists of a 1.3" OLED screen and a knob. OLED screen display strategy is classified according to menu. There are totally three types of menus including menu, buttons and presets. Double click a OLED screen in design area of the screen to enter its detailed setting.

DISPOSAL

Packaging:

1. The packaging can be recycled using standard disposal methods and reintroduced into the reusable material cycle.
2. Please follow the laws and regulations regarding disposal and recycling of packaging in your country.

Device:

1. This device is subject to the Waste Electrical and Electronic Equipment (WEEE) Directive of the European Union. Used appliances should not be disposed of with household waste. Used device must be disposed of through an approved disposal company or a municipal disposal facility. Please comply with the applicable regulations in your country.
2. Please follow all the disposal laws and regulations in your country.
3. As a customer, you can obtain information on environmentally-friendly disposal options from the product seller or the appropriate regional authorities.

BIENVENIDO A AUDIBAX

Interior view of a refrigerator with control panel and buttons (no visible text or symbols)

Close-up of a metallic knob with a black rectangular button labeled 'A' on a white background (no text or symbols on the knob itself)

Circular button with a teal upward arrow icon on dark background (no text or symbols)

M88WP1 PANEL