BAR 403 RGB PIXEL - Lighting Audibax - Free user manual and instructions
Find the device manual for free BAR 403 RGB PIXEL Audibax in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | LED Pixel Bar Light |
| Dimensions | 1000 mm x 100 mm x 200 mm |
| Weight | 4.5 kg |
| Power Supply | AC 100-240V, 50/60Hz |
| Power Consumption | 120 W |
| LED Type | SMD 5050 RGB |
| Number of LEDs | 108 (36 per color RGB) |
| Beam Angle | 120° |
| DMX Channels | 3/7/12 selectable |
| Control Modes | DMX, Sound Active, Auto, Master/Slave |
| IP Rating | IP20 |
| Housing Material | Aluminum and plastic |
| Mounting | Floor stand or truss clamp (optional) |
| Cleaning | Use a soft dry cloth; avoid solvents |
| Safety | Do not stare at LED source; keep away from water |
| Spare Parts | Contact Audibax support for replacement LEDs or PSU |
| General Information | Operating temperature: -10°C to 40°C |
Frequently Asked Questions - BAR 403 RGB PIXEL Audibax
How do I set up the BAR 403 RGB PIXEL for the first time?
Connect the power cable, then use the DMX or manual controls. For DMX, set the start address and select channel mode. Refer to the DMX configuration section in the manual.
Can I use this light without a DMX controller?
Yes, it has built-in sound active, auto, and master/slave modes. Press the MODE button to cycle through options.
How do I synchronize multiple BAR 403 RGB PIXEL units?
Set one unit as master and others as slave using the MODE button. Connect them via DMX cable (3-pin XLR). Master runs the show, slaves follow.
What is the maximum DMX cable length?
For reliable signal, keep DMX cable under 300 meters (1000 ft). Use a DMX terminator at the last fixture to avoid reflections.
How do I clean the LED lens?
Unplug the unit and wipe with a soft, dry cloth. Do not use abrasive cleaners or liquids. Avoid touching the LEDs directly.
The light flickers. What should I do?
Check power supply connections; ensure proper voltage. If using DMX, verify cable integrity and termination. Try resetting to factory defaults via menu.
Can I mount the BAR 403 RGB PIXEL upside down?
Yes, it can be mounted in any orientation using the included brackets or optional clamps. Ensure secure attachment to avoid falling.
What are the available DMX channel modes?
Selectable: 3-channel (RGB), 7-channel (RGB, dimmer, strobe, etc.), and 12-channel (pixel control). Change via the control panel.
How to reset the light to factory settings?
Press and hold the MENU button for 5 seconds until display shows 'RESET'. Confirm with ENTER. All settings return to defaults.
Is the BAR 403 RGB PIXEL suitable for outdoor use?
No, it has IP20 rating, meaning it is protected against solid objects but not water. Use indoors or under a covered structure.
User questions about BAR 403 RGB PIXEL Audibax
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Lighting in PDF format for free! Find your manual BAR 403 RGB PIXEL - Audibax and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. BAR 403 RGB PIXEL by Audibax.
USER MANUAL BAR 403 RGB PIXEL Audibax
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Audibax
Model : BAR 403 RGB PIXEL
Category : Lighting