R44io Dante - Audio/video converter Audibax - Free user manual and instructions

Product Type	Dante Audio Transmitter / Audio Converter
Brand	Audibax
Model	R44io Dante
Input Channels	4 balanced/unbalanced (Euroblock connectors)
Output Channels	4 balanced/unbalanced (Euroblock connectors)
Input Impedance	>1800 Ω
Output Impedance	200 Ω (balanced)
Max Input Level	+8 dBu @ 0 dB gain
Max Output Level	+20 dBu (balanced)
Frequency Response	20 Hz – 20 kHz, ±1 dB
Total Harmonic Distortion (THD)	<0.02%
Power Supply	12 V DC (external adapter included) or 802.3af PoE (with PoE splitter)
Network Interface	RJ45 CAT5/6 for Dante (Audinate)
Dimensions (W x D x H)	123 x 75 x 35 mm
Weight	Approx. 0.3 kg (estimated)
Additional Features	Integrated mounting bracket, Euroblock connectors for I/O, Dante digital audio conversion
Package Contents	1 × R44io Dante, 1 × Power adapter, 1 × User manual
Safety Compliance	CE, WEEE, professional use with applicable accident prevention regulations
Cleaning	Use a dry cloth; avoid liquids and solvents
Reparability	No user-serviceable parts; contact qualified service personnel for repairs

Frequently Asked Questions - R44io Dante Audibax

What is the Audibax R44io Dante used for?

The R44io Dante is a 4x4 audio converter that bridges analog audio signals with Dante digital audio networks. It allows you to integrate up to 4 microphones or line-level sources into a Dante system and route audio to outputs.

How do I power the R44io Dante?

You can power it using the included 12V DC adapter or via PoE (Power over Ethernet) with an 802.3af standard PoE switch and a PoE splitter. Do not use both simultaneously.

What connectors are used for audio input/output?

The device uses Euroblock (terminal block) connectors for both inputs and outputs. Each connector supports balanced or unbalanced signals.

Can I use this device with a computer?

Yes, to configure the Dante network, you need the free Audinate Dante Controller software (available for Windows and macOS). The device appears as a Dante device on the network.

What is the maximum input level?

The maximum input level is +8 dBu at 0 dB gain. For higher levels, adjust gain in Dante Controller or attenuate externally.

Does the R44io Dante support PoE?

It can be powered via PoE if you add an 802.3af PoE splitter (sold separately). The device itself does not have a PoE injector built in.

How many Dante channels does it support?

It supports 4 input and 4 output Dante channels (total 8 channels). The analog inputs convert to Dante, and Dante inputs convert to analog outputs.

What are the dimensions and weight?

The dimensions are 123 x 75 x 35 mm and it weighs approximately 0.3 kg (weight not officially specified). It is compact and includes a mounting bracket.

Can I use it with other Dante devices?

Yes, it works with any device that supports the Dante protocol, such as amplifiers, digital mixers, and other Dante-enabled gear. Use Dante Controller to route audio.

Is the R44io Dante compatible with 48V phantom power?

No, the device does not supply phantom power. It is designed for line-level or dynamic microphones. For condenser microphones, use an external phantom power supply.

USER MANUAL R44io Dante Audibax

R44io DANTE

Dante 4 In 4 Out Audio Transmitter Transmisor de audio Dante 4 Entradas / 4 Salidas

INDEX / ÍNDICE

ENGLISH

WELCOME TO AUDIBAX....1

SAFETY INSTRUCTIONS....1

IMPORTANT INFORMATION......2

PACKAGE CONTENT....3

SPECIFICATION......3

BASIC FUNCTION DESCRIPTION....3

FEATURES....3

DIAGRAM....4

USE AND OPERATION STEPS....4

DISPOSAL....5

ESPAÑOL

BIENVENIDOS A AUDIBAX....6

Thank you very much for choosing Audibax. We hope you enjoy your new product.

It has been developed and designed paying attention to the smallest details, with quality control with European standards supervised by our great team of professional technicians, who work every day to offer our customers the best quality.

We make sure that every Audibax product is built to last long. All our references are made with long lasting materials and our specialists are dedicated to constantly doing quality controls to guarantee the best result.

Please read carefully this manual in order to use your Audibax product in the best way. Do not hesitate to visit our website for further information: www.audibax.com

SAFETY INSTRUCTIONS

GENERAL INFORMATION

• It is important to read and follow the instructions carefully.
• Keep all information and instructions in a secure location.
• Always follow the instructions provided.
• Take note of all safety warnings and never remove them from the equipment.
• Use the equipment only as intended and for its intended purpose.
• Ensure that the stands and/or mounts used are sufficiently stable and compatible for fixed installations. Wall mounts should be properly installed and secured, and the equipment should be installed securely to prevent falls.
• When installing the equipment, be sure to observe the relevant safety regulations in your country.
• Do not install or operate the equipment near sources of heat, such as radiators, heat registers, or ovens, and ensure that it is always cooled sufficiently and cannot overheat.
• Do not place sources of ignition, such as burning candles, on the equipment.
• Keep ventilation slits unobstructed.
• For equipment designed for indoor use only should not be used near water, flammable materials, fluids, or gases. Special outdoor equipment should be used in accordance with the manufacturer's instructions.
• Ensure that no dripping or splashed water can enter the equipment and do not place containers filled with liquids on the equipment.
• Prevent objects from falling into the equipment.
• Use the equipment only with recommended accessories intended by the manufacturer.
• Do not attempt to open or modify the equipment.
• Check all cables after connecting the equipment to prevent accidents or damage due to tripping hazards.
• During transport, take steps to prevent the equipment from falling and causing damage or injury.
• If the equipment is not functioning properly, fluids or objects have gotten inside, or is otherwise damaged, switch it off immediately and unplug it from the power outlet (if applicable). Only authorized, qualified personnel should repair the equipment.
• Clean the equipment with a dry cloth.
• Comply with all applicable disposal laws and separate plastic and paper/cardboard during packaging disposal.
• Keep plastic bags out of the reach of children.

FOR DEVICES DESIGNED TO BE CONNECTED TO THE MAIN POWER SUPPLY:

- ATTENTION: If your equipment has a power cord with a grounding plug, it must be connected to a wall outlet with a ground connection. Never remove the grounding plug from the power cord.

- If your equipment has been exposed to extreme temperature changes, allow it to reach room temperature before turning it on. Otherwise, moisture and condensation may damage the equipment.

- Before plugging in the equipment, make sure that the voltage and frequency of the power outlet match the specifications of the equipment. If the equipment has a voltage selector, only connect it to the power outlet if the values match. If the power cord or adapter does not fit your outlet, contact an electrician.

- Do not step on the power cord. Make sure it is not pinched at the outlet, adapter, or equipment connection.

- Keep the power cord or adapter within reach and disconnect the equipment from the power supply when not in use or when cleaning it. Always unplug the cord or adapter by pulling the plug or adapter, not the cord. Never touch the cord or adapter with wet hands.

- Avoid frequently turning the equipment on and off, as this can reduce its useful life.

- IMPORTANT: Only replace fuses with those of the same type and rating. If a fuse repeatedly blows, contact an authorized service center.

- To completely disconnect the equipment from the power mains, unplug the power cord or adapter from the outlet.

- If your device has a Volex power connector, the mating Volex connector must be unlocked before it can be removed. Be careful when laying cables, as the equipment can slide or fall if the power cord is pulled.

- Unplug the power cord or adapter before an extended period of disuse or in case of lightning strike risk.

- Only install the equipment when it is disconnected from the power source.

- To prevent damage and overheating, qualified personnel should regularly clean and service the equipment depending on ambient conditions like dust, nicotine, and fog.

If the product contains the following symbols, please, read carefully:

CAUTION: To reduce the risk of electric shock, do not remove cover (or back). There are no user serviceable parts inside. Maintenance and repairs should be exclusively carried out by qualified service personnel.

The warning triangle with lightning symbol indicates dangerous uninsulated voltage inside the unit, which may cause an electrical shock.

The warning triangle with exclamation mark indicates important operating and maintenance instructions.

IMPORTANT INFORMATION

CAUTION! HIGH VOLUMES IN AUDIO PRODUCTS!

This equipment is designed for professional purposes and its commercial use must comply with the applicable national rules and regulations for accident prevention.

As the manufacturer of this product, Audibax has the responsibility to inform you about the potential health risks associated with its use. One such risk is hearing damage caused by prolonged exposure to high volume.

When this product is in use, it can generate high sound-pressure levels that may cause irreversible hearing damage to performers, employees, and audience members.

To prevent this, it is important to avoid exposing yourself or others to volumes exceeding 90 dB for an extended period of time.

PACKAGE CONTENT

1 x R44io Dante
1 x Audio transmitter (including terminal blocks)
1 x Power adapter
1x User's manual

SPECIFICATION

• Input: 4 balanced/unbalanced input
• Input Impedance: Greater than1800 Ω
• Max. Input Level: +8dbu@0dB gain
• Output: 4 balanced/unbalanced output
• Output Impedance: 200Ω balance
• Max. Output Level: +20dbu balance
• Freq. Response: 20\~20KHz, ±1dB
• THD: Less than 0.02%
• Power Requirements: 12V DC
• Dimensions: 123x75x35 mm

BASIC FUNCTION DESCRIPTION

(1) Dante 4by4i interface machine is used for the signal conversion between analog audio signal and Dante digital audio.
(2) This processor supports 4-channel analog audio signal balanced input and output, including 4-channel Dante digital audio signal input and output of 2 Dante devices.
(3)It is powered by DC12V, which can be used with 802.3af standard POE switch when adding POE splitter.

FEATURES

• Ideal interface to increase the number of microphones or AUX inputs
• 4 balanced line outputs can be used simultaneously, and all audio channels are used with Dante network.
• 4 balanced MIC/AUX inputs, and also 4 outputs using Euroblock connector
• CAT5/6 connector to link with Dante network and controlled by Audinate
• Small size integrated mounting bracket which can be installed in very limited space

DIAGRAM

1. Power socket, power supply
2. Dante network interface
3. Power indicator
4. Input and output audio interface

USE AND OPERATION STEPS

(1) Follow the instructions in the interface description. You can connect the supplied PoE injector or connect an external power adapter (12V Dcc).
Note: Do not use External power supplies with PoE injectors at the same time
(2) Dante audio network: The configuration, adjustment and update of the Dante Network is done through. the official Audinate Dante controller software.
Note: The Audinate Dante Controller control software is a free registration platform, where you can acquire the control software at no cost. The current available platforms are Windows and macOS:
https://www.audinate.com/products/software/dante-controller

1. The packaging can be recycled using standard disposal methods and reintroduced into the reusable material cycle.

2. Please follow the laws and regulations regarding disposal and recycling of packaging in your country.

Device:

Simple line drawing of a trash bin with crossed lines indicating no waste or prohibition (no text or symbols)

1. This device is subject to the Waste Electrical and Electronic Equipment (WEEE) Directive of the European Union. Used appliances should not be disposed of with household waste. Used device must be disposed of through an approved disposal company or a municipal disposal facility. Please comply with the applicable regulations in your country.

2. Please follow all the disposal laws and regulations in your country.

3. As a customer, you can obtain information on environmentally-friendly disposal options from the product seller or the appropriate regional authorities.

BIENVENIDO A AUDIBAX