IR-120 - Iron Imarflex - Free user manual and instructions
Find the device manual for free IR-120 Imarflex in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Steam Iron |
| Brand | Imarflex |
| Model | IR-120 |
| Power Consumption | 1200 Watts |
| Voltage | 220-240 V, 50/60 Hz |
| Soleplate Material | Non-stick Ceramic |
| Water Tank Capacity | 250 ml |
| Steam Output | Up to 30 g/min continuous |
| Shot of Steam | Yes, up to 100 g/min |
| Spray Function | Yes |
| Vertical Steaming | Yes |
| Self-Clean Function | Yes |
| Anti-Drip System | Yes |
| Anti-Calc System | Yes |
| Auto Shut-Off | Yes, after 8 minutes idle |
| Indicator Light | Power on/off, temperature ready |
| Cord Length | 2 meters |
| Dimensions (L x W x H) | 30 x 15 x 15 cm |
| Weight | 1.2 kg |
| Color | White/Blue |
| Warranty | 1 year |
Frequently Asked Questions - IR-120 Imarflex
How do I fill the water tank?
Open the water inlet cover and tilt the iron to fill with tap water up to the MAX mark. Do not exceed the maximum capacity.
Can I use the iron vertically for hanging garments?
Yes, the vertical steam function allows steam ironing on hanging clothes. Hold the iron upright and press the steam button.
How do I activate the self-clean function?
Fill the tank to Max, set temperature to max, unplug the iron, and press and hold the self-clean button. The iron will flush out impurities.
What should I do if the iron does not produce steam?
Ensure the water tank is filled and the temperature dial is set to steam range (2-3 dots). Wait for the indicator light to go out, then press the steam button.
How do I clean the soleplate?
Unplug and allow the iron to cool. Wipe the soleplate with a damp cloth. For stubborn residue, use a non-abrasive cleaner or a specialized soleplate cleaner.
Does the iron have an auto shut-off feature?
Yes, the iron automatically turns off after 8 minutes of inactivity in vertical position or 30 seconds when left on its base.
What type of water should I use?
Use ordinary tap water. Do not use distilled or deionized water as it may cause poor steam performance. For hard water areas, mix tap water with distilled water 50:50.
How do I store the iron after use?
Allow the iron to cool completely, empty the water tank, and store it upright on its heel. Coil the cord loosely around the base.
Why is the iron leaking water?
Leaking may occur if the temperature is too low for steam generation. Set the dial to a higher temperature. Also check that the water cap is closed tightly.
Can I use the iron on delicate fabrics?
Yes, but set the temperature to the lowest setting (synthetics) and use a pressing cloth to avoid damage. Do not use steam on delicate fabrics.
User questions about IR-120 Imarflex
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Iron in PDF format for free! Find your manual IR-120 - Imarflex and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. IR-120 by Imarflex.