STHR1232 - Drill STANLEY - Free user manual and instructions
Find the device manual for free STHR1232 STANLEY in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Drill |
| Brand | Stanley |
| Model | STHR1232 |
| Power Source | Corded Electric |
| Voltage | 120 V |
| Frequency | 60 Hz |
| Amperage | 6.5 A |
| No-Load Speed | 0-2500 RPM |
| Chuck Type | Keyless |
| Chuck Size | 1/2 inch (13 mm) |
| Max Drilling Capacity (Steel) | 1/2 inch (13 mm) |
| Max Drilling Capacity (Wood) | 1 inch (25 mm) |
| Variable Speed Trigger | Yes |
| Reversible | Yes |
| Built-in Level | Yes |
| Weight | 3.5 lbs (1.6 kg) |
| Dimensions (L x W x H) | 10.5 x 8.5 x 3 inches (26.7 x 21.6 x 7.6 cm) |
| Power Cord Length | 6 ft (1.8 m) |
| Included Accessories | Drill bit set, side handle, depth stop |
| Material | High-impact plastic, metal gears |
| Safety Features | Lock-on button, double insulation |
| Cleaning Instructions | Wipe with dry cloth; keep vents clear |
| Repairability | User-replaceable brushes; service center available |
Frequently Asked Questions - STHR1232 STANLEY
What is the chuck size of the Stanley STHR1232 drill?
The Stanley STHR1232 has a 1/2 inch (13 mm) keyless chuck, allowing for quick bit changes without tools.
Is the Stanley STHR1232 drill corded or cordless?
It is a corded drill with a 6 ft power cord, providing consistent power without battery concerns.
What is the maximum speed of the STHR1232?
The no-load speed is 0-2500 RPM, controlled by a variable speed trigger for precise drilling.
Can the Stanley STHR1232 be used for screwdriving?
Yes, the reversible motor and variable speed allow it to drive screws with appropriate bits.
What materials can the STHR1232 drill through?
It can drill up to 1/2 inch in steel and 1 inch in wood.
Does the drill come with a side handle?
Yes, it includes a side handle for better control and a depth stop for consistent depth drilling.
How do I change the carbon brushes on the STHR1232?
The drill has user-replaceable brushes. Access them by removing the brush caps on the motor housing. Use identical replacement brushes.
Is the Stanley STHR1232 double insulated?
Yes, it features double insulation for safety, eliminating the need for a ground wire.
What maintenance does the drill require?
Keep the ventilation slots clean, wipe the exterior with a dry cloth, and periodically lubricate the chuck with a light oil.
What is the warranty on the Stanley STHR1232?
Stanley typically offers a limited 1-year warranty against defects. Register your product for details.
User questions about STHR1232 STANLEY
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Drill in PDF format for free! Find your manual STHR1232 - STANLEY and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. STHR1232 by STANLEY.
