SpaceMaker CG800C - Coffee grinder BLACK & DECKER - Free user manual and instructions

Product Type	Coffee grinder and mini food processor
Brand	Black & Decker
Model	SpaceMaker CG800C
Power	120 V, 60 Hz
Grinding capacity	Up to 170 g (3/4 cup)
Mini food processor capacity	Up to 284 g (1 1/4 cups)
Blade material	Stainless steel
Main functions	Coffee bean grinding, chopping, mincing, mixing, pureeing
Safety	Double locking mechanism, polarized plug, sharp blade, handle with care
Cleaning	Hand washing recommended (dishwasher-safe parts)
Spare parts	Grinding bowl (CG800-01), Grinding blade (CG800-02), Bowl (CG800-03), Chopping blade (CG800-04), Storage lid (CG800-05), Mounting kit (SDC MOUNTING KIT)
Installation	Under cabinet with drilling (template provided)
Warranty	1 year (USA and Canada)
Use	Household use only

Frequently Asked Questions - SpaceMaker CG800C BLACK & DECKER

How to install the grinder under a cabinet?

Use the provided mounting template to drill four 6.35 mm (1/4 in) holes under the cabinet. Secure the appliance with the included screws and washers. For cabinets with a raised edge, use the appropriate spacer washers.

Can I grind spices or nuts in this grinder?

No, it is not recommended to grind spices or nuts as the bowl absorbs flavors and alters the taste of coffee. Use a second dedicated grinder for these ingredients.

How to clean the blades and bowls?

Wash parts in hot soapy water or in the dishwasher (hand washing is recommended to preserve sharpness). Never immerse the appliance in water. Wipe the exterior with a damp cloth.

What to do if the grinder does not start?

Check that the bowl is properly engaged (arrow aligned with the lock symbol), that the appliance is plugged in and the outlet works. If the problem persists, contact customer service.

What is the maximum grinding capacity?

The grinding bowl can hold up to 170 g (3/4 cup) of coffee beans. Do not exceed this amount to avoid clogging the appliance.

How to use the mini food processor?

Place the chopping blade on the bowl shaft, add food (max 284 g / 1 1/4 cups), engage the bowl until locked, then press the on/off button in pulses. Wait for complete stop before removing the bowl.

What types of grind can I get?

You can achieve a coarse grind (for percolator), medium (drip), fine (espresso), or extra fine (Turkish). Adjust grinding time according to the provided chart.

Can the grinder be used continuously?

No, use the pulse control (press and release) to avoid overheating. Process food in short bursts of a few seconds.

How to store the appliance?

Store the cord in the cord wrap or hang it on the back hook. Keep accessories in the storage lid. Unplug the appliance when not in use.

What does the warranty cover?

The one-year limited warranty covers any defects in workmanship or materials. It does not cover damage from commercial use, misuse, or glass parts. Keep your receipt.

USER MANUAL SpaceMaker CG800C BLACK & DECKER

Please Read and Save this Use and Care Book

MINI FOOD PROCESSOR /

GRINDER

MINIROBOT CULINAIRE / MOULIN

À CAFÉ

ACCROCHABLE

White industrial vacuum cleaner with black granular material inside a transparent container (no visible text or symbols)

USA/Canada 1-800-231-9786

www.prodprotect.com/applica

Accessories/Parts (USA/Canada)

Accessoires/Pièces (É.-U./Canada

1-800-738-0245

Model

Modèle

CG800C

IMPORTANT SAFEGUARDS

When using electrical appliances, basic safety precautions should always be followed, including the following:

Read all instructions.
☐ To protect against risk of electrical shock do not put cord, plugs or appliance in water or other liquid.
☐ Close supervision is necessary when any appliance is used by or near children.
☐ Unplug from outlet when not in use, before putting on or taking off parts, and before cleaning.
□ Avoid contacting moving parts.
☐ Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions, or is dropped or damaged in any manner. Return appliance to the nearest authorized service facility for examination, repair or electrical or mechanical adjustment. Or, call the appropriate toll-free number on the cover of this manual.
☐ The use of attachments not recommended or sold by the manufacturer may cause fire, electric shock or injury.
☐ Do not use outdoors.
☐ Do not let cord hang over edge of table or counter.
☐ Keep hands and utensils away from the cutting blade while chopping food to reduce the risk of severe injury to persons or damage to the food chopper. A scraper may be used, but only when the food chopper is not running.
☐ Blade is sharp. Handle carefully.
☐ To reduce the risk of injury, never place cutting blade on base without first putting bowl properly in place.
☐ Be certain cover is securely locked in place before operating appliance.
☐ Do not attempt to defeat the cover interlock mechanism.
☐ Do not let cord contact hot surface, including the stove.
☐ Check hopper for presence of foreign objects before using.
☐ To reduce the risk of fire or electric shock, do not operate any heating appliance beneath mounted unit.

☐ Do not mount the storage bracket/unit over or near any portion of a heating or cooking appliance or a sink or basin.

SAVE THESE INSTRUCTIONS.

This product is for household use only.

POLARIZED PLUG (120V Models Only)

This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this plug is intended to fit into a polarized outlet only one way. If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to modify the plug in any way.

TAMPER-RESISTANT SCREW

Warning: This appliance is equipped with a tamper-resistant screw to prevent removal of the outer cover. To reduce the risk of fire or electric shock, do not attempt to remove the outer cover. There are no user-serviceable parts inside. Repair should be done only by authorized service personnel.

ELECTRICAL CORD

a) A short power-supply cord (or detachable power-supply cord) is to be provided to reduce the risk resulting from becoming entangled in or tripping over a longer cord.
b) Longer detachable power-supply cords or extension cords are available and may be used if care is exercised in their use.
c) If a long detachable power-supply cord or extension cord is used,

1) The marked electrical rating of the detachable power-supply cord or extension cord should be at least as great as the electrical rating of the appliance,
2) If the appliance is of the grounded type, the extension cord should be a grounding-type 3-wire cord, and
3) The longer cord should be arranged so that it will not drape over the countertop or tabletop where it can be pulled on by children or tripped over.

Note: If the power supply cord is damaged, it should be replaced by qualified personnel. In Latin America, by an authorized service center.

Product may vary slightly from what is illustrated.

1. Mounted unit

† 2. Grinding bowl (Part # CG800-01)

† 3. Stainless steel grinding blade (Part # CG800-02)

† 4. ON/OFF (I/O) pulse control button

† 5. Processing workbowl (Part # CG800-03)

† 6. Stainless steel chopping blade (Part # CG800-04)

† 7. Storage lid (Part # CG800-05) 8. Cord storage (behind unit)

1. Cord management hook (behind unit)

†Consumer replaceable/removable parts

A2

† 1. Mounting Parts

(Part # SDC-MOUNTING KIT)

16 Spacers

4 1/2"

4 1/4"

4 3/16"

4 1/16

12 Screws

4 1"

4 1½"

4 2¼"

4 Washers

1. Mounting Template (in box)

3D mechanical assembly diagram showing multiple cylindrical components and interconnected circular components (no text or labels)

3

GETTING STARTED

• Remove all packing material, labels and any stickers.
• Remove and save literature.
• Unpack mounting washers, screws and spacers for mounting and set them aside in a safe place where they will not roll away or get lost.

Important: Do not attempt to operate appliance until it is properly installed.

CHOOSE A LOCATION

When choosing your location, consider the following:

• DO make sure to mount within reach of an electrical outlet.
- DO consider your normal work patterns in the kitchen when choosing location.
- DO NOT mount over any heating or cooking appliance such as your range or oven.
• DO NOT mount over or near a sink.
- DO NOT mount under, in front of or behind any under-cabinet light fixtures.

Note: If you are mounting multiple SpaceMaker ^™ appliances, they should not be mounted flush to one another. Allow at least 4" of space between appliances for adequate cooling.

Note: If you are connecting this appliance to the receptacle of another +SpaceMaker appliance such as the toaster oven or coffeemaker, make sure you can easily unplug the appliance following use.

DETERMINE CABINET TYPE

Prior to taping the mounting template and beginning to drill your holes, determine if your cabinet has a flat bottom (B) or an overhanging lip (C). If your cabinet is flat, follow STANDARD INSTALLATION; if the cabinet has a lip, refer to SPACER MOUNTING INSTALLATION.

STANDARD INSTALLATION (FLAT CABINET)

Important: Always wear protective glasses or goggles to prevent injury when drilling.

1. Clear countertop under installation area to avoid getting dust or debris on other appliances or items. Open cabinets and remove contents to make mounting easier.

2. With cabinet doors open, place mounting template flush against the surface of the underside of your cabinet, making sure to align thick line on template with bottom front edge of your cabinet (D).

Important: Do not align screw holes on template with the partition between cabinets, as this will prevent you from installing the appliance properly. Pay close attention to where the drill holes will be set so as not to damage your cabinets during mounting. Drilling through your cabinet's partition may cause damage to cabinets and prevent proper installation.

1. Once thick line is straight with bottom front edge, pull template tight and tape down on all 4 corners to hold in place.

2. Drilling from under the cabinet up, drill holes through the 4 places marked on the template, using a ¼-inch drill bit (E).

Important: Always ensure you are drilling straight up through the marked mounting hole on the template. Drilling at an angle may prevent proper installation and may damage cabinets if the drill bit pierces the partition.

1. Once holes are drilled, remove tape and mounting template and save template with your instructions in case you move or wish to remount at a later time.
2. Wipe dust and debris off inside cabinet surface. Also, make sure under side of cabinet is clean.
3. Place a washer inside the cabinet over each of the 4 holes you drilled.
4. Hold appliance in place, aligning front of unit with front edge of cabinet; drilled holes on cabinet should be aligned with mounting holes on the unit.
5. Screwing from inside the cabinet down into appliance holes, tighten 4 screws in place to secure appliance to cabinet.

Note: Always tighten screws to ensure the appliance does not move or shake during operation.

1. Pull out cord from cord storage behind appliance and plug into standard electrical outlet. Extra cord can be fed back into storage or hung over cord management hook behind unit (F).

3D rendering of a mechanical device with a black clip inserted into a transparent cylindrical container (no text or symbols visible)

Note: If you are connecting this appliance to the receptacle of another +SpaceMaker appliance such as the toaster oven or coffeemaker, make sure you can easily unplug the appliance following use.

1. Your †SpaceMaker™ appliance is now ready for use!

SPACER MOUNTING INSTALLATION (OVERHANG LIP CABINETS)

Important: Always wear protective glasses or goggles to prevent injury when drilling.

Note: Spacers are provided in case your cabinet has an overhang lip at the front edge. The spacers are used on the rear screw holes of the appliance to ensure it is level with the front. Only use spacers if your cabinet has an overhang.

1. Clear countertop under installation area to avoid getting dust or debris on other appliances or items. Open cabinets and remove contents to make mounting easier.
2. Using a ruler, measure the thickness of the overhang lip from the front to back of the overhang, accurately noting the number for use in the following step (G).

Close-up of hands using a ruler to measure a metal object (no visible text or symbols)

Note: If you do not have a ruler, you may cut out and use the paper ruler provided on the edge of your mounting template.

1. Once you have the overhang thickness, look at the dashed lines on the mounting template; each line has a measurement next to it that indicates the height of the lip used with that line. For example, if your cabinet has an overhang thickness of 12 ", you will use the 12 " dashed line on the template.

2. With cabinet doors open, place line selected on mounting template even with the bottom front edge of your cabinet, and tape in place against the lip (H).

1. With the paper securely taped in place against the lip, fold the rest of the mounting template back against the underside of cabinet surface, bending it to remain flush against both the back of the lip and the underside of the cabinet (J).

Architectural detail showing a modern building corner with structural beams and a signboard (no readable text or symbols)

Important: Do not align screw holes on template with the partition between cabinets, as this will prevent you from installing the appliance properly. Pay close attention to where the drill holes will be set so as not to damage your cabinets during mounting. Drilling through your cabinet's partition may cause damage to cabinets and prevent proper installation.

1. Drilling from under the cabinet up, drill holes through the 4 places marked on the template using a 14 -inch drill bit (see illustration E).

Important: Always ensure you are drilling straight up through the marked mounting hole on the template. Drilling at an angle may prevent proper installation and may damage cabinets if the drill bit pierces the partition.

1. Once holes are drilled, remove tape and mounting template and save template with your instructions in case you move or wish to remount at a later time.

2. Wipe dust and debris off inside cabinet surface. Also, make sure under side of cabinet is clean.

3. Place a washer inside the cabinet over each of the 4 holes you drilled.

4. Now, use your ruler or the paper ruler provided to measure the overhang height, placing your ruler vertically against the underside of the cabinet behind the overhang. This number determines the number of spacers you need, using a number of spacers equal to the overhang height. For example, a 1" overhang would use 2, 12 " spacers on each of the holes (K).

Close-up of a hand holding a ruler measuring a surface (no visible text or symbols)

1. Place a washer inside the cabinet over each of the 4 holes you drilled.
2. Drop one of your screws through each of the washers covering the holes in the cabinet, from inside the cabinet down.
3. Place the appropriate number of spacers determined in step 9 on each screw to ensure the appliance will be even (L).

Note: If not enough spacers are available, use spacers on rear two screws only. The front edge of cabinet will provide support for the two front screws.

Architectural structure with two vertical cylindrical components mounted on a curved concrete floor (no text or symbols visible)

Note: For spacer installation, you may require assistance in mounting in order to hold spacers in place while securing the appliance at the same time. If assistance is not available, use a small clamp to hold the spacers in place while you position the appliance.

1. Once spacers are set, hold appliance up and tighten screws to secure. Screw from inside the cabinet down.

Note: Always lighten screws to ensure the appliance does not move or shake during operation.

1. Pull out cord from cord storage behind appliance and plug into standard electrical outlet. Extra cord can be fed back into storage or hung over cord management hook behind unit (see illustration F).

Note: If you are connecting this appliance to the receptacle of another +SpaceMaker appliance such as the toaster oven or coffeemaker, make sure you can easily unplug the appliance following use.

How to Use

This appliance is for household use only.

GETTING STARTED

1. For warranty verification, do not remove line cord tag.
2. Please go to www.prodprotect.com/applica to register your warranty.
3. Wash the coffee grinding bowl, mini food processor workbowl and blades for both in hot soapy water, rinse and dry thoroughly as directed in the Care and Cleaning section of this Use & Care manual.

Important: Although these parts can be washed in the dishwasher, we recommend they be washed by hand to preserve the sharpness of the blades and the appearance of the workbowl. Do not immerse the appliance in water.

1. Wipe outside of appliance with a damp cloth; dry thoroughly.

Note: For your protection this appliance has a dual safety mechanism. Do not attempt to use this appliance unless either container with the appropriate blade is in place.

GRINDING COFFEE BEANS

1. Place the grinding blade on the spindle in the center of the grinding bowl making sure the blade rests at the bottom of the stem. With your fingers on the top of the stem of the grinding blade give it a twisting motion to make sure it is securely seated on the spindle (M).

Illustration of a hand inserting a small cylindrical object into a container (no text or symbols)

Important: Handle grinding blade carefully. It is very sharp.

1. Place desired amount, up to 14 cup (70 g), of coffee beans into the grinding bowl.
2. With your fingers on the top of the stem of the grinding blade use a twisting motion to make sure the coffee beans are evenly distributed in the grinding bowl.
3. Holding the grinding bowl from the bottom securely insert it up into the center of the bottom of the motor housing with the arrow signage on the bowl directly under the UNLOCK Signage on the bottom of the motor housing (N).

Illustration of a hand holding a container with granular substance, no text or symbols present

1. Turn the grinding bowl clockwise until it locks into position. The LOCK signage on the housing should be aligned with the arrow on the grinding bowl.
   Note: There is a safety feature on this appliance that will not allow the grinder to operate unless the workbowl is securely in place.
2. Plug in the appliance.
3. Press and hold the ON/OFF (I/O) control button(P).

Close-up of a mechanical device with a knob and scale indicator (no readable text or symbols)

Note: To stop the coffee grinder at any time, remove your finger from the ON/OFF (I/O) button.

1. When the coffee beans are ground to the desired texture release the ON/OFF (I/O) button.

Important: Be sure grinding blade has completely stopped spinning before removing workbowl from appliance.

1. Hold the grinding bowl securely and turn it counterclockwise to the UNLOCK position and keeping the bowl level, lower it from the appliance.
2. With your fingers on the top of the stem of the blade, lift it up and out of the work bowl with a twisting motion. Spoon the coffee directly from the bowl.
3. Clean the bowl after each use as described in CARE and CLEANING.

Note: Do not use the grinder for spices; the bowl will absorb some of the flavor of the spices and affect the flavor of the coffee.

1. Unplug the appliance when not in use.

GRINDING GUIDELINES
Selecting the grind setting:
Brew Method Grind Setting Appearance
Percolator or French Press Coarse Like salt particles
Drip or Vacuum Medium Like sand particles
Espresso Fine Like talcum powder
Turkish Extra Fine Like flour

The proper grind is important for the best coffee flavor. The quicker the brewing process is, the finer the grind used. Coffee that is ground too fine for a particular brewing process will result in bitter, pungent tasting coffee. Coffee that is ground too coarse will result in weak, watery coffee.

Grind time and yield:
AMOUNT GRIND	SUGGESTED TIME
14 cup (23 grams) Coarse	8 seconds
Medium 9 seconds
Fine 10 seconds
Extra Fine 11 seconds
14 cup (31 grams) Coarse	10 seconds
Medium 12 seconds
Fine 14 seconds
Extra Fine 16 seconds
12 cup (47 grams) Coarse	10 seconds
Medium 11 seconds
Fine 15 seconds
Extra Fine 20 seconds
34 cup (70 grams) Coarse	12 seconds
Medium 17 seconds
Fine 30 seconds
Extra Fine 37 seconds

GROUND COFFEE TIPS

• For a cup of rich, full flavored coffee use 1 12 rounded tablespoons of ground coffee for each 5 12 oz cup of coffee.
• For optimum flavor it is best to grind the amount of coffee needed immediately before brewing.
• Do not use the coffee grinder to grind spices or nuts; the coffee will share those flavors.
• Blending 2 or more types of beans will result in a richer, more complex brew.
• It is important to clean the ground coffee bowl after each use; the residual oils from the coffee will give an off flavor to the next batch of coffee ground.

USING THE MINI FOOD PROCESSOR

The mini processor is used to chop, mince, mix and puree foods to a smooth consistency. Use the workbowl to chop fresh and cooked fruits and vegetables, fresh herbs, cooked meats, fish and poultry; to make sauces, dressings and salsas; bread, cookie and cracker crumbs.

1. Place the chopping blade on the spindle in the center of the workbowl. With your fingers on the top of the stem of the chopping blade give it a twisting motion while pushing down to make sure it is securely seated on the spindle (Q).

Illustration of a hand using a pipette to lift a cylindrical container (no text or symbols visible)

Important: Handle grinding blade carefully. It is very sharp.

1. Place up to 1¼ cups (135 g) of food to be processed into the workbowl.
2. With your fingers on the top of the stem of the chopping blade give it a twisting motion to make sure the food is evenly distributed in the workbowl.
3. Holding the workbowl from the bottom securely insert the bowl up into the center of the bottom of the motor housing with the arrow on the bowl directly under the UNLOCK signage on the bottom of the motor housing (R).

Hand holding a cylindrical container with internal particles, emitting motion arrows (no text or symbols)

1. Turn the workbowl clockwise until it locks into position. The LOCK signage on the housing should be aligned with the arrow on the workbowl.

Note: There is a safety feature on this appliance that will not allow the grinder to operate unless the workbowl is securely in place.

1. Plug in the appliance.
2. Press and hold the ON/OFF (I/O) control button. To stop the chopper at any time, remove your finger from the ON/OFF (I/O) button.

Important: Process foods no more than a few seconds at a time. Pulsing produces excellent results and offers greater control.

1. When the food is processed to the desired consistency release the ON/OFF (I/O) button.

Important: Be sure chopping blade has completely stopped spinning before removing workbowl from appliance.

1. Hold the workbowl securely and turn it counterclockwise to the UNLOCK position and keeping the bowl level, lower it from the appliance.

2. With your fingers on the top of the stem of the chopping blade, lift it up and out of the workbowl with a twisting motion. Remove food using rubber spatula or simply invert workbowl onto plate, bowl or work surface.

3. Unplug appliance when not in use.

HELPFUL TIPS FOR CHOPPING AND BLENDING

• The processor works very quickly. Watch carefully to avoid over-processing foods.
• For best results, process foods that are about the same size.
  • Cool cooked foods before processing.
• Do not overload the processor by adding more than 1¼ cups of food in the workbowl at one time.
• Use this processor to prepare small amounts of cooked fruits and vegetables for baby food.
• Cut hard foods, such as chocolate, whole hard spices and cheese into smaller pieces before processing to avoid damaging the blade.

Care and Cleaning

This product contains no user serviceable parts. Refer service to qualified service personnel.

1. Remove the bowl from the mounted unit by twisting to the unlock position.
2. Carefully remove the blade from the bowl.

Important: Blades are sharp. Handle carefully.

1. The coffee grinding bowl, mini food processor workbowl and stainless steel chopping and grinding blades can be washed in hot, soapy water.
2. Always rinse and dry parts thoroughly after cleaning

Important: Although these parts can be washed in the dishwasher, we recommend they be washed by hand to preserve the sharpness of the blades and the appearance of the workbowl. Do not immerse the appliance in water.

1. Wipe outside of appliance with a damp cloth; dry thoroughly.

TROUBLESHOOTING
PROBLEM POSSIBLE CAUSE SOLUTION
Grinder stops The working has disengaged. is correctly inserted into There are too many beans the motor housing. Unplug in the grinding bowl. the appliance and remove some of the beans from the grinding bowl.		grinding bowl
Coffee tastes rancid. coffee grounds.	Grinder has buildup of will become	Oil in the coffee beans rancid if left in the grinder. Makes sure there are no beans left in the grinding bowl. Clean the grinding bowl after each use.
Coffee tastes like nuts or spices.	Grinder has been used for other grinding operations.	Grinder will share flavors; purchase an additional grinding bowl for spices and nuts.
Appliance will not start.	Workbowl or grinding bowl is not correctly engaged in the housing. Appliance may not be plugged in. The outlet is not working.	Be sure the arrow on the bowl is correctly aligned with the LOCK signage on the housing and the bowl is completely integrated and flush with the base Check to make sure appliance is plugged in and outlet is working.
Food is unevenly chopped	Workbowl is over filled. Food may be cut in random sizes.	Unplug the appliance and remove some of the food from the workbowl. Smaller amounts will process more evenly. Press the ON/OFF button in 5 second or fewer increments. Allow the blades to stop completely before pressing the ON/OFF button again. Check the size of the food before continuing. Cut food in same size pieces before placing in processor.

PROBLEM POSSIBLE CAUSE SOLUTION
Food is unevenly Food may be over Use brief pulsing actions; chopped or is processed. wait for blades to stop watery. and check the size of the processed food.
Food catches on There may be too much Remove workbowl from blade. food in the workbowl. appliance; carefully remove blade and empty workbowl. Replace blade as directed above and reduce the amount of food in the workbowl.

IMPORTANTES CONSIGNES DE SÉCURITÉ

1. Appareil installé

3D diagram of mechanical components arranged in a grid-like structure (no text or symbols)

19

POUR COMMENCER

CHOIX D'UN EMPLACEMENT

Close-up of a mechanical device with a black clip inserted into a transparent container (no visible text or symbols)

Close-up of a hand holding a ruler measuring a surface with a curved hook (no text or symbols visible)

Architectural detail showing structural beams and a window (no text or symbols visible)

Close-up of a hand holding a ruler measuring a wall, no visible text or symbols

Exterior view of a modern building corner with two small human figures standing on the floor (no signage or text visible)

Illustration of a hand inserting a plug into a container with arrows indicating motion (no text or symbols)

Hand holding a container with granular substance, emitting a circular motion indicator (no text or symbols)

Close-up of a mechanical component with a circular knob and scale markings (no readable text or symbols)

Illustration of a hand using a tool to lift a cylindrical container (no text or symbols)

Illustration of a hand holding a container with granular material inside, emitting motion lines (no text or symbols)

For service, repair or any questions regarding your appliance, call the appropriate 800 number on the cover of this book. DO NOT return the product to the place of purchase. Also, please DO NOT mail product back to the manufacturer, nor bring it to a service center. You may also want to consult the website listed on the cover of this manual.

One-Year Limited Warranty

(Applies only in the United States and Canada)

What does it cover?

- Any defect in material or workmanship; provided; however, Applica's liability will not exceed the purchase price of the product.

For how long?

• One year after the date of original purchase

What will we do to help you?

- Provide you with a reasonably similar replacement product that is either new or factory refurbished

How do you get service?

• Save your receipt as proof of the date of sale.
• Check our on-line service site at www.prodprotect.com/applica, or call our toll-free number, 1-800-231-9786, for general warranty service
• If you need parts or accessories, please call 1-800-738-0245.

What does your warranty not cover?

• Damage from commercial use
• Damage from misuse, abuse or neglect
• Products that have been modified in any way
- Products used or serviced outside the country of purchase
• Glass parts and other accessory items that are packed with the unit
- Shipping and handling costs associated with the replacement of the unit
- Consequential or incidental damages (Please note, however, that some states do not allow the exclusion or limitation of consequential or incidental damages, so this limitation may not apply to you.)

How does state law relate to this warranty?

- This warranty gives you specific legal rights, and you may also have other rights that vary from state to state or province to province.

BESOIN D'AIDE?