PH-65A - Rotary hammer HiKOKI - Free user manual and instructions

Product Type	Rotary Hammer
Brand	HiKOKI
Model	PH-65A
Power Input	1500 W
Impact Energy	10 J
No Load Speed	0-900 rpm
Impact Rate	0-4500 bpm
Drilling Capacity (Concrete)	65 mm
Drilling Capacity (Steel)	13 mm
Drilling Capacity (Wood)	50 mm
Chuck Type	SDS-Max
Power Supply	AC 220-230 V, 50/60 Hz
Weight	6.8 kg
Dimensions (L x W x H)	490 x 110 x 280 mm
Vibration Control	Anti-vibration handle
Variable Speed	Yes
Reverse Rotation	Yes
Safety Clutch	Yes
Side Handle	Included
Depth Gauge	Included
Carrying Case	Optional
Maintenance	Regular cleaning and carbon brush inspection
Spare Parts Availability	Authorized service centers

Frequently Asked Questions - PH-65A HiKOKI

What is the drilling capacity of the HiKOKI PH-65A in concrete?

The PH-65A can drill up to 65 mm in concrete using core bits, and up to 32 mm with solid bits.

Does the PH-65A have a variable speed trigger?

Yes, it features a variable speed trigger for precise control, with a no-load speed range of 0-900 rpm.

What type of chuck does the PH-65A use?

It uses an SDS-Max chuck, which allows quick bit changes and secure retention.

Is the PH-65A suitable for chiseling?

Yes, it has a chiseling mode. You can switch between rotary hammer, hammer only, and rotation only modes.

How do I change the carbon brushes on the PH-65A?

Carbon brushes are replaceable. Access them by removing the brush caps on the motor housing. Always use genuine HiKOKI brushes.

What safety features does the PH-65A have?

It includes a safety clutch to prevent sudden torque reaction, an anti-vibration handle, and a lock-on button for continuous use.

What is the recommended lubricant for the PH-65A?

Use HiKOKI grease for the gearbox. Regularly grease the SDS-Max shank and the hammer mechanism.

Can the PH-65A be used for overhead drilling?

Yes, but it is heavy (6.8 kg). Use the side handle and ensure proper support to reduce fatigue.

What accessories are included with the PH-65A?

Typically includes a side handle, depth gauge, and a grease container. A carrying case is sold separately.

Where can I find the user manual for the PH-65A?

The manual is available for free download on notice-facile.com or on the official HiKOKI website in PDF format.

USER MANUAL PH-65A HiKOKI

Line drawing of a soldering iron with a pointed tip, enclosed in a circle (no text or symbols)

Read through carefully and understand these instructions before use.

2

3

Line drawing of a hand holding a soldering iron (no text or symbols)

4

5

⑤

6

	7	a
8	44	6
9	43 Z 7

	English Español		中國語	Tiếng Việt
1	Hold the tool with its fl attended part directed upward.	Sujete la herramienta con la parte plana dirigida hacia abajo.	握住朝下的平坦部分。	Cả m dụ ng cụ theo cách mà phả n phẳng cũ a nó hướng lên.
2	Front cover Cubierta delantera		前罩	Ná p đã y trước
3	Stop lever Palanca de parada		停止桿	Tay gà t dừ ng
4	Oil gaugeCheck the oil quantity by holding the body upright.	Indicador de aceite Compruebe la cantidad de aceite sujetando el cuerpo hacia arriba.	油量計握住鑽機主體,使之朝上以檢查油量。	Chỉ mú c dà u Kiế m tra lượ ng dà u bả ng cá ch cả m phả n thân thả ng đù ng.
5	Resupply oil when the oil level drops to less than approx. 3 mm.	Cuando el nivel del aceite descienda a menos de unos 3 mm, rellene con aceite.	油量降到約3 mm以下時,應即加以補充。	Tá i cung cá p dà u khi mú c dà u hạ xuố ng dưới khoả ng 3 mm.
6	Wear limit Límite de desgaste		磨損極限	Giới hạn mài mòn
7	No. of carbon brush No. de escobilla de carbón		碳刷號	Mã số chồi than
8	Usual carbon brush Escobilla de carbón usual		通常碳刷	Chổ i than thông thường
9	Auto-stop carbon brush	Escobilla de carbón de parade automática	自動停止碳刷	Chổ i than dù ng tự độ ng

Read all instructions

Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury.

The term “power tool” in all of the warnings listed below refers to your mains operated (corded) power tool or battery operated (cordless) power tool.

SAVE THESE INSTRUCTIONS

1) Work area

a) Keep work area clean and well lit.

Cluttered and dark areas invite accidents.

b) Do not operate power tools in explosive atmospheres, such as in the presence of fl ammable liquids, gases or dust.

Power tools create sparks which may ignite the dust of fumes.

c) Keep children and bystanders away while operating a power tool.

Distractions can cause you to lose control.

2) Electrical safety

a) Power tool plugs must match the outlet.

Never modify the plug in any way.

Do not use any adapter plugs with earthed (grounded) power tools.

Unmodifi ed plugs and matching outlets will reduce risk of electric shock.

b) Avoid body contact with earthed or grounded surfaces such as pipes, radiators, ranges and refrigerators.

There is an increased risk of electric shock if your body is earthed or grounded.

c) Do not expose power tools to rain or wet conditions.

Water entering a power tool will increase the risk of electric shock.

d) Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool.

Keep cord away from heat, oil, sharp edges or moving parts.

Damaged or entangled cords increase the risk of electric shock.

e) When operating a power tool outdoors, use an extension cord suitable for outdoor use.

Use of a cord suitable for outdoor use reduces the risk of electric shock.

3) Personal safety

a) Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication.

A moment of inattention while operating power tools may result in serious personal injury.

b) Use safety equipment. Always wear eye protection.

Safety equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries.

c) Avoid accidental starting. Ensure the switch is in the off position before plugging in.

Carrying power tools with your finger on the switch or plugging in power tools that have the switch on invites accidents.

d) Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury.

e) Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations.

f) Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away from moving parts.

Loose clothes, jewellery or long hair can be caught in moving parts.

g) If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used.

Use of these devices can reduce dust related hazards.

4) Power tool use and care

a) Do not force the power tool. Use the correct power tool for your application.

The correct power tool will do the job better and safer at the rate for which it was designed.

b) Do not use the power tool if the switch does not turn it on and off.

Any power tool that cannot be controlled with the switch is dangerous and must be repaired.

c) Disconnect the plug from the power source before making any adjustments, changing accessories, or storing power tools.

Such preventive safety measures reduce the risk of starting the power tool accidentally.

d) Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool.

Power tools are dangerous in the hands of untrained users.

e) Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tools' operation.

If damaged, have the power tool repaired before use.

Many accidents are caused by poorly maintained power tools.

f) Keep cutting tools sharp and clean.

Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control.

g) Use the power tool, accessories and tool bits etc., in accordance with these instructions and in the manner intended for the particular type of power tool, taking into account the working conditions and the work to be performed.

Use of the power tool for operations different from intended could result in a hazardous situation.

5) Service

a) Have your power tool serviced by a qualified repair person using only identical replacement parts.

This will ensure that the safety of the power tool is maintained.

PRECAUTION

Keep children and infi rm persons away.

When not in use, tools should be stored out of reach of children and infi rm persons.

DEMOLITION HAMMER SAFETY WARNINGS

1. Wear ear protectors.

Exposure to noise can cause hearing loss.
2. Use auxiliary handles supplied with the tool.

Loss of control can cause personal injury.

1. Wear protective glasses to protect your eyes.

2. Wear a mask when turning your head upward.

3. Properly set the bit holder.

SPECIFICATIONS

1. Since the bit becomes very hot during operation, exercise extremes very hot.
2. Safe operation depends on one's stable posture.
3. At the start of work, confirm the oil supply and screw tightening.
4. When working at a highly elevated location, pay attention to articles and persons below.
5. Before starting breaking or chipping a wall, floor, or ceiling, thoroughly confi rm that no items such as an electric cable or conduit are buried inside.
6. Wear protective shoes to protect your feet.

Voltage (by areas)* (110 V, 115 V, 120 V, 127 V, 220 V, 230 V, 240 V)	~
Power Input 1240 W*
Full-load impact rate	1400/min.
Weight (without cord)	15 kg

* Be sure to check the nameplate on product as it is subject to change by areas.

STANDARD ACCESSORIES

(1) Case ....1
(2) Bull Point (Total Length 410 mm) ....1
(3) Oil Feeder 1
(4) Wrench ....1

Standard accessories are subject to change without notice.

OPTIONAL ACCESSORIES (sold separately)

○ Cutter (for crushing asphalt)

○ Cold Chisel

(for grooving and squaring)

○ Rammer

(for tamping sand and gravel)

Two mechanical components: a circular dial and a long cylindrical rod (no text or symbols visible)

Rammer + Shank

Rammer

Out diameter: 200 mm Code No.: 944965

Shank

Total length: 250 mm Code No.: 944966

○ Scoop

(for digging ground in various foundation work)

Metal tool with pointed tip and handle, no visible text or symbols

Total length:

Code No.:

380 mm

957154

○ Electric Hammer Oil (one liter)

(Code No.: 955009)

Optional accessories are subject to change without notice.

APPLICATIONS

Crushing concrete, chipping, digging, and squaring.

Application examples:

Installation of piping and wiring, sanitary facility installation, machinery installation, water supply and drainage work, interior jobs, harbor facilities and other civil engineering works.

PRIOR TO OPERATION

1. Power source

Ensure that the power source to be utilized conforms to the power requirements specified on the product nameplate.

2. Grounding

This tool should be grounded while in use to protect the operator from electric shock. The tool is equipped with a three conductor cord and grounding type plug to fit the proper grounding type receptacle. The green (or green and yellow) conductor in the cord is the grounding wire. Never connect the green (or green and yellow) wire to a live terminal.

3. Power switch

Ensure that the power switch is in the OFF position. If the plug is connected to a receptacle while the power switch is in the ON position, the power tool will start operating immediately, which could cause a serious accident.

4. Extension cord

When the work area is removed from the power source, use an extension cord of sufficient thickness and rated capacity. The extension cord should be kept as short as practicable.

5. Feeding oil (refer to the paragraph on oil feeding)

Prior to using the power tool, remove the oil gauge and do not fail the oil tank with the provided oil. (Although the oil tank is built in, it contains only a small volume of oil when shipped from the HiKOKI Works.)

6. Mounting a tool

NOTE

When handling bull point, cold chisel and other accessories, HiKOKI standard tools are recommended for better operation.

(1) Rotate the stop lever 180^ in a clockwise direction while pulling it toward you. Next, insert the tool shank into the hexagonal hole on the front cover. (Fig. 1)
(2) Clamp the tool by turning the stop lever by half a turn in the opposite direction. (Fig. 2)

NOTE

When removing the tool, follow the above procedures in reverse.

HOW TO USE THE DEMOLITION HAMMER

1. Pull the trigger switch after applying the tip of the bit to the crushing position.

In some cases, it is necessary to punch the tip of the bit against the crushing position forcibly in order to begin the striking motion.

This is not due to malfunction of the tool. It means that the safe guard mechanism against no-load striking is working.

1. Operate the tool by utilizing its empty weight. The performance will not be better even if the tool is pressed or thrust forcibly against the work surface. Hold the tool with a force just sufficient to counteract the reaction. (Fig. 3)

CAUTION

Sometimes the tool does not begin the striking motion even when the motor rotates because the oil has become thick.

If the tool is used at low temperatures or if it is used after a long time idle, the tool should be used running in for five minutes in order to warm it up.

OIL FEEDING

CAUTION

Prior to oil feeding, always disconnect the plug from the receptacle.

Since an oil chamber is built in this HiKOKI Electric Hammer, it can be used for approximately 20 days without replenishing lubricating oil, assuming that the Hammer is used continuously 3 – 4 hours daily.

Feed oil into the oil tank as described below before using this Hammer. (see Fig. 4 and 5)

1. Just before no oil is visible in the oil gauge window when the power tool is held upright, feed oil without fail.
2. Before feeding oil, use the provided wrench to remove the oil gauge.
   Be careful not to lose the rubber packing attached below the oil gauge.
3. Check the oil level once a day, confirming that oil is filled.
4. After feeding oil, securely clamp the oil gauge.

NOTE

As an optional accessory, oil for the HiKOKI Electric Hammer (one liter) is sold separately. Use this oil when oil in the tank is depleted. Shell Oil Co. ROTELLA #40 (engine oil) can also be used. This oil is sold as Shell gasoline stations most anywhere.

MAINTENANCE AND INSPECTION

CAUTION

Be sure to switch OFF and disconnect the attachment plug from the receptacle to avoid a serious accident.

1. Inspecting the tool

Since use of a dull tool will degrade efficiency and cause possible motor malfunction, sharpen or replace the tool as soon as abrasion is noted.

2. Inspecting the mounting screws

Regularly inspect all mounting screws and ensure that they are properly tightened. Should any of the screws be loose, retighten them immediately. Failure to do so could result in serious hazard.

3. Maintenance of the motor

The motor unit winding is the very “heart” of the power tool. Exercise due care to ensure the winding does not become damaged and/or wet with oil or water.

4. Inspecting the carbon brushes (Fig. 6)

The Motor employs carbon brushes which are consumable parts. When they become worn to or near the "wear limit", it could result in motor trouble. When an auto-stop carbon brush is equipped, the motor will stop automatically. At that time, replace both carbon brushes with new ones which have the same carbon brush numbers shown in the figure. In addition, always keep carbon brushes clean and ensure that they slide freely within the brush holders.

5. Replacing carbon brushes

Loosen the screw of the cap covers, then remove the cap covers. After removing the brush caps, the carbon brushes can be removed.

After replacing the carbon brushes, tighten the brush caps, then mount the cap covers securely.

6. Service parts list

A: Item No.
B: Code No.
C: No. Used

D: Remarks

CAUTION

Repair, modification and inspection of HiKOKI Power Tools must be carried out by a HiKOKI Authorized Service Center.

This Parts List will be helpful if presented with the tool to the HiKOKI Authorized Service Center when requesting repair or other maintenance.

In the operation and maintenance of power tools, the safety regulations and standards prescribed in each country must be observed.

MODIFICATIONS

HiKOKI Power Tools are constantly being improved and modified to incorporate the latest technological advancements.

Accordingly, some parts (i.e. code numbers and/or design) may be changed without prior notice.

NOTE

Due to HiKOKI's continuing program of research and development, the specifications herein are subject to change without prior notice.

Two mechanical components: a circular dial and a long cylindrical rod (no text or symbols visible)

Pisón + Barrena

Pisón

Díametro exterior: 200 mm

Metal tool with a pointed tip and handle, shown in grayscale (no text or symbols visible)

Two mechanical components: a circular dial and a long cylindrical rod (no text or symbols visible)

撞鐘 + 柄

撞鐘

外徑: 200 mm

代號：944965

柄

總長: 250 mm

代號：944966

○ 鎧子（各種基礎工程的挖土作業用）

Metal tool with a pointed tip and handle, no visible text or symbols

總長：380 mm

代號：957154

○ 電動鎚油（1 升）

(代號: 955009)

選購附件可能不預先通告而徑予更改。

用途

混凝土破碎、鑿平、挖掘、切屑。

應用例:

CẢ NH BÁ O AN TOÀ N VỀ MÁ Y ĐỤ C PHÁ

Two mechanical components: a circular dial and a long cylindrical rod (no visible text or symbols)

Đà m nê n + Chuôi

Đà m nê n

Metal tool with a pointed tip and handle, no visible text or symbols

Tổ ng chiề u dà i:

Mã Sô :

380 mm

957154

Two mechanical components: a circular dial and a long cylindrical tool (no visible text or symbols)

Metal tool with a pointed tip and handle, no visible text or symbols

Two mechanical components: a circular dial and a long cylindrical rod (no text or symbols visible)

Penumbuk + Shank

Penumbuk

Diameter luar:

No. Kode:

200 mm

944965

Shank

Total panjang:

No. Kode:

250 mm

944966

○ Sekop

Metal tool with a pointed tip and handle, no visible text or symbols

Total panjang:

380 mm

No. Kode:

957154

○ Oli Martil Listrik (satu liter)

(No. Kode: 955009)

Line drawing of a quill pen in an inkwell (no text or symbols)

Line drawing of a quill pen in an inkwell (no text or symbols)

Koki Holdings Co., Ltd.

806

Code No. C99014138 M

Printed in Malaysia