Valore

PD01 - Mobile Device Charger Valore - Free user manual and instructions

Find the device manual for free PD01 Valore in PDF.

📄 4 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice Valore PD01 - page 2
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type Power Bank
Brand Valore
Model PD01
Battery Capacity 20000mAh
Battery Type Built-in Polymer Lithium-ion
USB Output 1 & 2 5V/3.0A (max)
USB Output 3 & 4 5V/3.0A (max)
Type-C Output 5V/3.0A, 9V/3.0A, 12V/3.0A, 15V/3.0A, 20V/2.25A (45W max)
Micro USB Input 5V/2.0A (max)
Type-C Input 5V/3.0A, 9V/3.0A, 12V/3.0A, 15V/2.4A, 20V/1.8A (36W max)
Charging Time (PD 36W) Approximately 4 hours
Charging Time (5V/2A) Approximately 11 hours
Recharge Cycles Up to 300 times
Operating Temperature 0°C to 35°C
Package Contents Power Bank, Micro USB Cable, Type-C to Type-C Cable, Soft Pouch
Compliance IEC60950 & IEC62133

Frequently Asked Questions - PD01 Valore

How long does it take to fully charge the power bank?
With a PD 36W charger, it takes approximately 4 hours. With a 5V/2A charger, it takes about 11 hours. For first use, charge for 14-16 hours.
Can I charge my laptop with this power bank?
Yes, the Type-C output supports up to 45W (20V/2.25A), which can charge many laptops that accept USB-C charging.
How many devices can I charge simultaneously?
You can charge up to 4 devices at once using the four USB output ports. The total output is limited to 5V/3.0A per port.
What is the battery capacity?
The power bank has a capacity of 20000mAh, which can charge a typical smartphone multiple times.
Why is my power bank not charging my device?
Ensure the power bank is fully charged. Also check the cable connection and try a different cable. If the issue persists, the device may be drawing too much current.
How do I check the remaining battery level?
Press the power button once to display the battery percentage via the LED indicator.
Can I use the power bank while it is charging?
Yes, the power bank supports pass-through charging, but it may increase total charging time and generate heat. It is recommended to avoid prolonged use while charging.
How do I maintain the battery for long life?
Fully charge the power bank before first use and recharge it every three months if not in use. Avoid exposing it to extreme temperatures and do not drop or puncture the device.
What types of devices can I charge?
The power bank is compatible with most USB-powered devices, including smartphones, tablets, cameras, and laptops (via Type-C with up to 45W). Uses standard cables (Lightning, Micro USB, USB-C).
Is the power bank safe to use?
Yes, it complies with IEC60950 and IEC62133 safety standards. It has built-in protections against overcharge, short circuit, and overheating.

User questions about PD01 Valore

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Mobile Device Charger in PDF format for free! Find your manual PD01 - Valore and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PD01 by Valore.

USER MANUAL PD01 Valore

Thank you for purchasing the 20000mAh PD Power Bank (PD01).

  • Dual input design allows you to conveniently charge the power bank with either a Type-C or Micro USB charging cable
  • 45W output power charges laptop* and phone simultaneously
  • Fast charge USB output charges 3 times faster than conventional USB output
  • Power Delivery (PD) technology provides fast charging for most Type-C enabled devices

Important: Please read the user manual thoroughly before using your Power Bank.

Specifications:

  • Battery capacity: 20000mAh
  • Battery type: Built-in Polymer Lithium-ion
  • USB output 1 & 2: 5V/3.0A (max)
  • USB output 3 & 4: 5V/3.0A (max)
  • Type-C output: 5V/3.0A, 9V/3.0A, 12V/3.0A, 15V/3.0A, 20V/2.25A (45W) (max)

- Micro USB input: 5V/2.0A (max)

- Type-C input: 5V/3.0A, 9V/3.0A, 12V/3.0A, 15V/2.4A, 20V/1.8A (36W) (max)

- Charging time: Approximately 4 hours (PD 36W charging)

• Approximately 11 hours (5V/2A)

- Recharge cycle: Up to 300 times cycle

- Operating temperature: 0^ to 35^

Package Contents:

• 20000mAh PD Power Bank
- Micro USB charging cable
- Type-C to Type-C charging cable
- Soft pouch

UNDERSTANDING THE PRODUCT

VALORE USB1 SW1A USB2 USB3 SW3A USB4 + - ① ② ③ ④ ⑤

① Micro USB input port
② USB output ports
③ LED indicator
④ Power button
⑤ Type-C PD input/output

START USING THE 2000MAH PD POWER BANK

1) Charging the power bank

Connect your power bank to the USB adaptor (2.0A) using the charging cable provided.

When the LED indicator is all lit, it indicates that the battery is fully charged.

Press the power button once to display battery percentage.

HOME HOME

Note: Fully charge the power bank for at least 14-16 hours before first use. This is to maximise the battery performance and prolonging the life of lithium ion batteries.

Recharge your power bank once every three months when not in use or seldom used.

2) Charging of devices

Connect your power bank to your mobile device's charging port using a 8-pin, Micro USB, Type-C cable.

Valore PD01 - 2) Charging of devices - 1

flowchart
graph LR
    A["VALORE"] -->|USB| B["USB"]
    A -->|DDR| C["DDR"]
    A -->|USB| D["USB"]
    A -->|DDR| E["DDR"]
    A -->|USB| F["Power"]
    G["Smartphone"] -->|USB| H["Smartphone"]
    G -->|USB| I["Smartphone"]
    G -->|USB| J["Smartphone"]

TROUBLESHOOTING

Issue 1:

Power bank is unable to charge your mobile device

Problem 1: Power bank battery is flat

Solution: Fully charge the power bank and resume charging your mobile device.

Issue 2:

Power bank drains off quickly

Problem: Running multiple applications on your mobile device

Solution: Turn off all running applications on the mobile device and leave it to charge till full.

Extra consumption of energy would be due to heat produced during the charging of your mobile device.

Issue 3:

Unable to charge (power indicator is not flashing)

Problem 1: The voltage of the power adapter is too low.

Solution: Use 5V supply with at least 800mAh for charging.

Problem 2: Faulty cable

Solution: Check the cable to ensure that it is well connected or replace damaged cables.

TECHNICAL SUPPORT & WARRANTY

  • For Technical Support, email us at v.info@valore.sg.
  • For Warranty Registration, visit www.valore.sg.

Cautions:

Read all the instructions and warnings carefully prior to using this product.

  • Do not dismantle or open the power bank
  • Do not subject the power bank to mechanical shock such as crushing, bending, puncturing or shredding. Avoid dropping or placing heavy object on the power bank.
  • Do not expose the power bank to water or other liquids
  • Do not expose the power bank to hear and/or fire. Avoid storage in direct sunlight.
  • Do not attempt to insert foreign objects into the power bank. Do not short-circuit the power bank by storing it haphazardly in receptacle where it may be short-circuited by other metallic or conductive objects.
  • Do not use any charger* other than that specifically provided for use with the power bank. Battery usage by children should be supervised.
    *The charger may also be known as the adaptor, and is used to charge the power bank

DISCLAIMER & TRADEMARKS

All information, trademarks, logos, graphics, and images (“Materials”) provided on this user manual are copyrighted or trademarked and are the property of Challenger Technologies Limited. Any unauthorized use of any material contained on the instruction manual may violate copyright laws, trademark laws, laws of privacy and communications statutes. The trademarks, service marks and logos used and displayed in the Materials are registered and unregistered

trademarks and service marks of Valore and others. All other registered and unregistered company names, product names and marks mentioned herein the (“Materials”) are the property of their respective owners and may be trademarks or registered trademarks.

Complies with IEC60950 & IEC62133

Valore PD01 - DISCLAIMER & TRADEMARKS - 1

Valore PD01 - DISCLAIMER & TRADEMARKS - 2

Valore PD01 - DISCLAIMER & TRADEMARKS - 3

Valore PD01 - DISCLAIMER & TRADEMARKS - 4

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : Valore

Model : PD01

Category : Mobile Device Charger