PD05 - Mobile Device Charger Valore - Free user manual and instructions
Find the device manual for free PD05 Valore in PDF.
| Product Type | Universal travel charger for mobile devices |
| Brand | Valore |
| Model | PD05 |
| Input Voltage | AC 100-240V, 50/60Hz |
| Output Voltage / Current | 5V DC, 2.1A (max) |
| Number of USB Ports | 1 |
| Charging Protocol | Standard USB charging (BC1.2 compatible) |
| Dimensions (approx.) | 65 x 40 x 25 mm (2.6 x 1.6 x 1.0 in) |
| Weight | 50 g (1.8 oz) |
| Cable Length | Integrated cable: 100 cm (39 in) |
| Plug Type | Interchangeable plugs (US, EU, UK, AU) – included |
| Safety Features | Overcurrent, overvoltage, short circuit, overheat protection |
| LED Indicator | Blue light when powered on |
| Materials | PC/ABS flame retardant plastic |
| Operating Temperature | 0°C to 35°C (32°F to 95°F) |
| Storage Temperature | -20°C to 60°C (-4°F to 140°F) |
| Certifications | CE, RoHS, FCC |
| Compatibility | Smartphones, tablets, Bluetooth headphones, power banks, and other USB-charged devices |
| Warranty | 2 years (limited) |
Frequently Asked Questions - PD05 Valore
User questions about PD05 Valore
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
Download the instructions for your Mobile Device Charger in PDF format for free! Find your manual PD05 - Valore and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PD05 by Valore.
USER MANUAL PD05 Valore
Thank you for purchasing the Valore TRU20A 18W 20000mAh Power Bank (PD05).
- Dual input design to conveniently charge power bank using USB-C or Micro USB charging cable
- Dual USB & USB-C output for simultaneous device charging
- Power Delivery (PD) technology provides fast charging for most USB-C enabled devices
Important: Please read the user manual thoroughly before using your Power Bank.
Specifications:
- Battery type: Lithium Polymer
- Battery capacity: 20000mAh – 74Wh
- USB 1&2 output: 5V/3A, 9V/2A, 12V/1.5A (max)
- USB-C input & output: 5V/3A, 9V/2A, 12V/1.5A (Max PD18W)
- Micro USB input: 5V/2A, 9V/2A (Max)
- Charging time: Approximately 5 hours (PD 9V/2A)
Approximately 8 hours (5V/2A) - Recharging cycle: 300 times cycle
- Dimensions (L x W x D): 123 x 67 x 25.5mm
- Material: ABS + PC
- Operating temperature: -10^ to 40^
- Weight: 355g
Package Contents:
• TRU20A 18W 20000mAh power bank
- USB to USB-C charging cable
- Soft pouch
UNDERSTANDING THE PRODUCT

① USB output ports
② Digital indicator
③ Touch power button
④ Micro USB input port
⑤ Type-C PD input/output
START USING THE 2000MAH PD POWER BANK
1) Charging the power bank
Connect your power bank to the USB adaptor (2.0A) using the charging cable provided.
When the LED indicator is all lit, it indicates that the battery is fully charged.
Press the touch power button once to display battery percentage.
While charging the power bank, the last digit will blink.

Note: Fully charge the power bank for at least 14-16 hours before first use. This is to maximise the battery performance and prolonging the life of lithium ion batteries.
Recharge your power bank once every three months when not in use or seldom used.
2) Charging of devices
Connect your power bank to your mobile device's charging port using a 8-pin, Micro USB, Type-C cable.

TROUBLESHOOTING
Issue 1:
Power bank is unable to charge your mobile device
Problem 1: Power bank battery is flat
Solution: Fully charge the power bank and resume charging your mobile device.
Issue 2:
Power bank drains off quickly
Problem: Running multiple applications on your mobile device
Solution: Turn off all running applications on the mobile device and leave it to charge till full.
Extra consumption of energy would be due to heat produced during the charging of your mobile device.
Issue 3:
Unable to charge (power indicator is not flashing)
Problem 1: The voltage of the power adapter is too low.
Solution: Use 5V supply with at least 800mAh for charging.
Problem 2: Faulty cable
Solution: Check the cable to ensure that it is well connected or replace damaged cables.
TECHNICAL SUPPORT & WARRANTY
- For Technical Support, email us at v.info@valore.sg.
- For Warranty Registration, visit www.valore.sg.
Cautions:
Read all the instructions and warnings carefully prior to using this product.
- Do not dismantle or open the power bank
- Do not subject the power bank to mechanical shock such as crushing, bending, puncturing or shredding. Avoid dropping or placing heavy object on the power bank.
- Do not expose the power bank to water or other liquids
- Do not expose the power bank to hear and/or fire. Avoid storage in direct sunlight.
- Do not attempt to insert foreign objects into the power bank. Do not short-circuit the power bank by storing it haphazardly in receptacle where it may be short-circuited by other metallic or conductive objects.
- Do not use any charger* other than that specifically provided for use with the power bank. Battery usage by children should be supervised.
*The charger may also be known as the adaptor, and is used to charge the power bank
DISCLAIMER & TRADEMARKS
All information, trademarks, logos, graphics, and images (“Materials”) provided on this user manual are copyrighted or trademarked and are the property of Challenger Technologies Limited. Any unauthorized use of any material contained on the instruction manual may violate copyright laws, trademark laws, laws of privacy and communications statutes. The trademarks, service marks and logos used and displayed in the Materials are registered and unregistered
trademarks and service marks of Valore and others. All other registered and unregistered company names, product names and marks mentioned herein the (“Materials”) are the property of their respective owners and may be trademarks or registered trademarks.