MONITOR AUDIO

C380-IDC - Pregnant MONITOR AUDIO - Free user manual and instructions

Find the device manual for free C380-IDC MONITOR AUDIO in PDF.

📄 8 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice MONITOR AUDIO C380-IDC - page 2
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type In-ceiling speaker
Brand Monitor Audio
Model C380-IDC
Driver Size 8 inches (203 mm)
Frequency Response 45 Hz - 25 kHz
Impedance 8 ohms
Sensitivity 90 dB (1W/1m)
Power Handling (RMS) 100 W
Power Handling (Peak) 200 W
Dimensions (Diameter x Depth) 280 mm x 120 mm
Cut-Out Diameter 240 mm
Weight 2.5 kg
Installation Type In-ceiling (new construction or retrofit)
Grille Paintable magnetic grille
Tweeter Type 1-inch pivoting C-CAM gold dome
Woofer Type 8-inch C-CAM cone
Tri-Grip II Fixing System Yes
Frequency Limit (-6 dB) 40 Hz - 30 kHz
Safety Do not expose to moisture; ensure proper electrical connections
Maintenance Wipe with dry cloth; do not use abrasive cleaners
Spare Parts / Repairability Contact authorized dealer for replacement drivers

Frequently Asked Questions - C380-IDC MONITOR AUDIO

What is the recommended amplifier power for the C380-IDC?
The C380-IDC has a power handling of 100W RMS and 200W peak. An amplifier delivering 30-150W per channel is recommended for optimal performance.
Can I paint the grille?
Yes, the grille is paintable. Remove the grille before painting and ensure paint is applied evenly to avoid blocking the perforations.
What is the cut-out size required for installation?
The required cut-out diameter is 240 mm (9.45 inches). Ensure the ceiling void has sufficient depth (at least 120 mm).
Does the C380-IDC have a pivoting tweeter?
Yes, the 1-inch C-CAM gold dome tweeter is pivoting, allowing you to direct sound towards the listening area for improved imaging.
Is the C380-IDC suitable for use in bathrooms or outdoor areas?
No, this speaker is designed for indoor residential use only. It is not rated for moisture or outdoor environments.
Can I use the C380-IDC with a 70V/100V distributed audio system?
No, the C380-IDC is a low-impedance speaker (8 ohms) and is not equipped with a transformer for high-impedance systems.
How do I wire the C380-IDC?
Connect the positive terminal to the amplifier's positive output and negative to negative. Use high-quality speaker wire (14-16 AWG) for best results.
What is the warranty on the C380-IDC?
Monitor Audio typically offers a 5-year limited warranty from the date of purchase. Check with your dealer for specific terms.
Can I install the C380-IDC in new construction before drywall?
Yes, it is compatible with new construction. Use the optional pre-construction bracket (sold separately) to position the speaker before drywall installation.
How do I clean the C380-IDC?
Wipe the grille and baffle with a soft, dry cloth. Do not use water, solvents, or abrasive cleaners as they may damage the finish.

User questions about C380-IDC MONITOR AUDIO

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Pregnant in PDF format for free! Find your manual C380-IDC - MONITOR AUDIO and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. C380-IDC by MONITOR AUDIO.

USER MANUAL C380-IDC MONITOR AUDIO

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : MONITOR AUDIO

Model : C380-IDC

Category : Pregnant