Page Zone Extender VIP-801 - Syntoniseur audio Valcom - Free user manual and instructions
Find the device manual for free Page Zone Extender VIP-801 Valcom in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Audio Tuner / Page Zone Extender |
| Brand | Valcom |
| Model | VIP-801 |
| Dimensions (H x W x D) | 1.75 x 19 x 8 in (4.45 x 48.26 x 20.32 cm) |
| Weight | 5.5 lb (2.5 kg) |
| Power Supply | 120 VAC, 60 Hz, 0.5 A |
| Audio Inputs | Balanced line-level (2 x RCA, 1 x 3.5 mm) |
| Audio Outputs | Balanced line-level zone output (screw terminal) |
| Number of Zones | 1 (extendable via additional units) |
| Frequency Response | 20 Hz - 20 kHz (±1 dB) |
| Signal-to-Noise Ratio | > 90 dB |
| Total Harmonic Distortion | < 0.1% |
| Mounting | Rack-mountable, 1U |
| Operating Temperature | 32°F to 104°F (0°C to 40°C) |
| Humidity | 10% to 90% non-condensing |
| Indicators | Power LED, Zone Active LED |
| Controls | Volume adjustment, zone selection switch |
| Cleaning | Wipe with dry cloth; do not use liquid cleaners |
| Safety | UL listed; disconnect power before servicing |
| Spare Parts Availability | Contact Valcom for replacement power supplies and modules |
Frequently Asked Questions - Page Zone Extender VIP-801 Valcom
How do I connect the VIP-801 to my existing paging system?
Connect the audio source (e.g., paging controller) to the balanced line-level input. Use the zone output terminals to connect to the zone speakers. Ensure the power supply is plugged in and the zone selection switch is set correctly.
What is the maximum distance for speaker wiring?
For 70V/100V distributed audio systems, use proper gauge wiring. Valcom recommends 18 AWG for runs up to 500 ft. For longer distances, consult the manual or use a higher gauge.
Can I daisy-chain multiple VIP-801 units?
Yes, each VIP-801 is designed as a single-zone extender. Multiple units can be cascaded by connecting the zone output of one to the input of the next. Ensure proper impedance matching.
How do I adjust the volume on the VIP-801?
Use the volume adjustment knob on the front panel. Turn clockwise to increase output level. For precise setting, use a sound level meter.
What does the 'Zone Active' LED indicate?
The LED illuminates when the zone is receiving an audio signal. If the LED is off, check the audio source connection and the zone selection switch.
Can I use the VIP-801 with a 24V DC power supply?
No, the VIP-801 requires 120 VAC 60 Hz. Using a different power supply may damage the unit. Always use the supplied power cord.
How do I reset the VIP-801 to factory defaults?
There is no user-accessible factory reset. To restore normal operation, power cycle the device. If issues persist, contact Valcom support.
Is the VIP-801 compatible with both 70V and 100V systems?
Yes, the VIP-801 supports both 70V and 100V distributed audio systems. Set the zone output accordingly per your system requirements.
What should I do if there is no audio output?
Check the power LED: if off, verify power connection. If on, check input signal and zone switch. Ensure speakers are properly wired and not shorted. Test with a known good audio source.
Where can I find the complete user manual?
The full manual is available for download at notice-facile.com or the Valcom website. It includes detailed installation and troubleshooting instructions.
User questions about Page Zone Extender VIP-801 Valcom
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Syntoniseur audio in PDF format for free! Find your manual Page Zone Extender VIP-801 - Valcom and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Page Zone Extender VIP-801 by Valcom.