VIP-802 - Uncategorized Valcom - Free user manual and instructions

Product Type	Dual Networked Page Zone Extender
Brand	Valcom
Model	VIP-802
Number of Zones	2
Audio Input Impedance	600 Ohms
Audio Input Level	-10dBm nominal
Music Source Input Impedance	8 to 600 Ohms
Music Input Level	-10dBm nominal
Output Impedance	50 Ohms
Output Level	-10dBm nominal
Voice Switch Sensitivity	-21dBm
Relay Contact Rating	1A @ 24VDC
Ethernet Port	10/100 Base-T
Power Options	24VDC via barrel connector or PoE 802.3af Class 3
Power Consumption (PoE)	Class 3
Protocols	DHCP, IGMP v3, UDP, TCP, HTTP, Telnet, FTP
Voice Algorithm	G.711 (μ-law) with echo suppression
Operating Temperature	32 to 104°F (0 to 40°C)
Humidity	0 to 85% non-precipitating
Dimensions (HxWxD)	1.75 x 6.75 x 9.5 in (4.445 x 17.145 x 24.13 cm)
Weight	1.75 lbs (0.79 kg)
Shipping Weight	3.0 lbs (1.35 kg)
Mounting	Wall, table, or rack mountable
Warranty	1 year limited warranty
Configuration	Via Valcom VIP-102 IP Solutions Setup Tool (Windows)

Frequently Asked Questions - VIP-802 Valcom

What is the Valcom VIP-802?

The Valcom VIP-802 is a Dual Networked Page Zone Extender that enables voice access to two zones of one-way paging over an IP-based LAN/WAN.

How many paging zones does the VIP-802 support?

It supports 2 zones of one-way paging, allowing zone extension anywhere on the network.

What are the power options for the VIP-802?

It can be powered via an external 24VDC power supply (2.5mm jack) or via Power over Ethernet (PoE) 802.3af Class 3.

How is the VIP-802 configured?

Configuration is done using the Valcom VIP-102 IP Solutions Setup Tool on Windows. No server is required.

What are the dimensions and weight of the VIP-802?

Dimensions: 1.75" H x 6.75" W x 9.5" D (4.445 cm x 17.145 cm x 24.13 cm). Weight: 1.75 lbs (0.79 kg). Shipping weight: 3.0 lbs (1.35 kg).

What audio codec does the VIP-802 use?

It uses G.711 (μ-law) with echo suppression for voice communication.

What network protocols are supported?

Protocols include DHCP, IGMP v3, UDP, TCP, HTTP, Telnet, and FTP.

Can the VIP-802 be rack mounted?

Yes, it is wall, table, or rack mountable. The device is constructed of steel.

What is the warranty period for the VIP-802?

It comes with a 1-year limited warranty from the date of shipment, covering defects in materials and workmanship.

What are the input and output levels?

Audio input: -10dBm nominal at 600 ohms. Output: -10dBm nominal at 50 ohms. Music input: -10dBm nominal at 8-600 ohms.

USER MANUAL VIP-802 Valcom

• Page With Music Output, Music Mutes During Page
- Output Control Contact Closure Provided During Paging Output
- Compatible With 25 Or 70 Volt Amplifiers
• 2.5mm Jack For DC Power
• Power Over Ethernet 802.3af Compliant
- No Server Required
• 1 to 11 Digit Dial Plans
- Easy Windows Based Setup

DESCRIPTION:

The VIP-802 Dual Networked Page Zone Extender enables voice access to two zones of one-way paging over an IP-based LAN/WAN. This allows page zone extension anywhere on the network. Multiple VIP-802 Dual Networked Page Zone Extenders can be used on the same network to create very large and distributed public address systems.

Example applications include: Multiple floors in a single building, Multiple buildings in a campus environment, City wide paging of all Fire & Rescue buildings, Interstate paging between bank branches.

Specifications:

Nominal Specifications

Input Impedance: 600 Ohms

Input Level: -10dBm nominal

Voice Switch Sensitivity: -21dBm

Music Source Input Impedance: 8 to 600 Ohms

Music Input Level: -10dBm nominal

Output Impedance: 50 Ohms

Output Level: - 10dBm nominal

Relay Current: 1 AMP @ 24VDC

Protocols: DHCP, IGMP v3, UDP, TCP, HTTP,

Telnet, FTP

Voice Algorithm:

G.711 (64kbits/s) (ulaw)

Echo Suppression

Nominal Power Requirements

Via back panel barrel connector:

Voltage: 24VDC

Current: 325mA

Via 802.3af PoE Ethernet Switch:

802.3af: Class 3

Environment

Temperature: +32 to +104 °F (0 to +40 °C)

Humidity: 0 to 85% non-precipitating

Dimensions/Weight

1.75 "H x 6.75 "W x 9.5 "D (4.445 cm x 17.145 cm x 24.13 cm)

Weight: 1.75 lbs. (0.79 kg)

Shipping Weight: 3.0 lbs (1.35 kg)

ARCHITECTS' AND ENGINEERS

The Dual Networked Page Zone Extender Model VIP-802 will provide a single 10/100 Ethernet port, 2 audio input/output circuits, 2 Digital contact closure inputs and 2 N.O. relay contact outputs. The Dual Networked Page Zone Extender Model VIP-802 will provide all circuitry and software to convert network data to zone page audio output. The Dual Networked Page Zone Extender Model VIP-802 will provide all circuitry and software to convert input audio to zone page audio and control information suitable for transmission to other Valcom IP Solutions products over a data network. The Dual Networked Page Zone Extender Model VIP-802 shall form one part of a serverless Network based communications system.

The Dual Networked Page Zone Extender Model VIP-802 shall be powered via either an external 24 Vdc power supply or via a 802.3af PoE Ethernet switch port.

All setup and configuration of the Dual Networked Page Zone Extender Model VIP-802 will be via the Valcom VIP-102 IP Solutions Setup Tool.

The Dual Networked Page Zone Extender Model VIP-802 shall be constructed of steel and be wall, table or rack mountable.

The maximum dimensions shall be: 1.75 H x 6.75" W x 9.5" D (4.45cm H x 17.15cm W x 24.13cm D). Weight shall be approximately: 1.75 lbs. (0.79 kg).

LIMITED WARRANTY

Valcom, Inc. warrants its products to be free from defects in materials and workmanship under conditions of nor-mal use and service for a period of one year from the date of shipment. The obligation under this warranty shall be limited to the re-placement, repair or refund of any such defective device within the warranty period, provided that:

1. inspection by Valcom, Inc. indicates the validity of the claim,
2. the defect is not the result of damage, misuse, or negligence after the original shipment,
3. the product has not been in any way repaired by others and that factory sealed units are unopened (A service charge plus parts and labor will be applied to units defaced or physically damaged).
4. freight charges for the return of products to Valcom, Inc. are prepaid,
5. all units "out of warranty" are subject to a service charge. The service charge will cover minor repairs (major repairs will be subject to additional charges for parts and labor)

This warranty is in lieu of and excludes all other warranties expressed or implied, and in no event shall Valcom, Inc. be liable for any anticipated profits, consequential damages, loss of time or other losses incurred by the buyer in connection with the purchase, operation or use of the product.

This warranty specifically excludes damage incurred in shipment. In the event a product is received in damaged condition, the carrier should be notified immediately. Claims for such damage should be filed with the carrier involved in accordance with the F.O.B. point.