Satellite 5059 - Uncategorized Rupert Neve Designs - Free user manual and instructions
Find the device manual for free Satellite 5059 Rupert Neve Designs in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | 16-Channel Summing Mixer |
| Brand | Rupert Neve Designs |
| Model | Satellite 5059 |
| Channels | 16 |
| Form Factor | 2U Rackmount |
| Dimensions (W x H x D) | 19 x 3.5 x 10 inches (48.3 x 8.9 x 25.4 cm) |
| Weight | 10 lbs (4.5 kg) |
| Power Supply | Internal, 100-240 VAC, 50/60 Hz |
| Power Consumption | 30 W typical |
| Input Connections | 16 x balanced line inputs (DB25 or XLR) |
| Output Connections | 2 x balanced XLR main outputs, 1 x stereo monitor output |
| Frequency Response | 10 Hz - 40 kHz, ±0.5 dB |
| THD+N | < 0.003% at +20 dBu output |
| Maximum Output Level | +26 dBu |
| Noise Floor | -90 dBu (unweighted) |
| Gain Range | Unity to +6 dB (trim per channel) |
| Additional Features | Individual channel mute, solo, phase invert; passive cooling; custom Rupert Neve transformers |
| Maintenance | Keep dry; clean with soft cloth; no user-serviceable parts |
| Safety Certifications | CE, FCC, RoHS |
| Warranty | 1 year limited (extendable) |
Frequently Asked Questions - Satellite 5059 Rupert Neve Designs
How do I connect the Satellite 5059 to my audio interface?
Use DB25 or XLR cables from your interface's line outputs to the 5059's inputs. The 5059 expects balanced line-level signals. Ensure proper gain staging to avoid distortion.
What is the difference between the main output and monitor output?
The main output provides the full summed mix at line level. The monitor output is typically used for headphones or nearfield speakers, often with a separate level control.
Can I use the Satellite 5059 with unbalanced gear?
Yes, but use balanced connections for best noise rejection. For unbalanced sources, you may need to modify cables or use a balanced/unbalanced converter.
How do I adjust the gain on each channel?
Each channel has a trim pot that allows adjustment from unity gain to +6 dB. Use a small screwdriver to trim levels to match your mix.
What is the recommended operating temperature?
Operate the unit between 0°C and 40°C (32°F to 104°F). Avoid direct sunlight and high humidity.
How do I clean the Satellite 5059?
Use a dry, lint-free cloth to wipe the exterior. Do not use chemical cleaners or spray liquids directly on the unit. Ensure the unit is powered off.
Does the Satellite 5059 require phantom power?
No, phantom power is not needed. The 5059 is a line-level mixer and does not provide microphone preamps.
Can I daisy-chain multiple Satellite 5059 units?
Yes, you can link units via the Summing Bus output (DB25) to expand channel count. Consult the manual for exact wiring.
What is the purpose of the phase invert switch?
The phase invert switch reverses the polarity of a channel. Use it to correct phase cancellation when mixing multiple microphones or sources.
How do I know if the unit is properly grounded?
Ensure the power cable is connected to a grounded outlet. If you experience hum, check that all connected gear shares the same ground reference and avoid ground loops.
User questions about Satellite 5059 Rupert Neve Designs
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual Satellite 5059 - Rupert Neve Designs and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Satellite 5059 by Rupert Neve Designs.