INN-507 - Air-conditioner Innoliving - Free user manual and instructions

Product Type	Evaporative Air Cooler
Model	INN-507
Brand	Innoliving
Fan Power Consumption	65 W
Max Air Flow	6.0 m³/min
Sound Power Level	65 dB(A)
Max Air Speed	9 m/sec
Fan Speeds	3 (Low, Mid, High)
Cooling Function	Yes (requires water and ice tablets)
Swing Function	Yes (vertical oscillation)
Timer Function	Yes
Ice Tablets Compatibility	Yes (use frozen ice tablets for extra cooling)
Water Tank Capacity	Not specified (fill to MAX level)
Water Level Indicator	MIN and MAX marks inside tank
Dust Filter	Removable and washable
Cooling Pad	Removable, clean with soft brush, air dry
Wheels	4 casters for mobility
Control Panel	Manual buttons with ON/OFF, speed, cooler, swing, timer
Safety Features	Class II insulation, overheat protection (not specified), auto shut-off (not specified)
Maintenance	Clean dust filter regularly, change water weekly, clean cooling pad as needed
Application	Indoor use only
Recommended Distance from Walls	At least 20 cm
Air Flow Direction	Horizontal: automatic oscillation; Vertical: manual adjustment
Included Accessories	Ice tablets (not specified), wheels, user manual

Frequently Asked Questions - INN-507 Innoliving

How do I turn on the Innoliving INN-507 air cooler?

Plug in the appliance, then press the 'ON/OFF' button on the control panel. The device will start at the default speed. You can adjust the fan speed using the 'Low', 'Mid', or 'High' buttons.

How do I activate the cooling function?

First, ensure the water tank is filled to the MAX level and ice tablets (if desired) are inserted. Then press the 'Cooler' button on the control panel. The water pump will start, and the air will be cooled as it passes through the wet cooling pad. Never activate the cooling function if the water level is below MIN.

Can I use regular ice cubes instead of ice tablets?

It is recommended to use the provided or compatible ice tablets. Regular ice cubes may melt too quickly and could damage the water pump. If you use regular ice, ensure they are small enough to fit and do not exceed the MAX water level.

How do I clean the dust filter?

Press the two release levers at the top of the filter to remove it. Clean the filter with a mild detergent and a soft brush, then rinse and dry thoroughly. Reinstall by inserting the bottom first and pushing the upper part until it locks.

How do I clean the cooling pad?

After removing the dust filter, gently take out the cooling pad. Use a soft brush to remove dust and dirt. Rinse with water if necessary and allow it to air dry completely before reinstalling. Do not use chemical cleaners.

How do I drain the water tank?

Turn the tank lock lever to a horizontal position and pull the tank partially out. Remove the plastic stopper at the bottom of the tank and let the water drain into a container. Replace the stopper, then push the tank back and lock it.

What is the maximum water level?

The water tank has a 'MAX' mark inside. Never fill above this level to avoid overflow and potential damage. The tank also has a 'MIN' mark; do not operate the cooling function below this level.

Is it safe to leave the unit unattended?

The manual does not recommend leaving the unit unattended for long periods. Always turn off and unplug when not in use. Keep children and pets away from the direct airflow. Do not cover the unit while operating.

What should I do if the water pump doesn't work?

First, check that the water level is above MIN. If the pump still doesn't work, turn off and unplug the unit. Clean the water tank and cooling pad to remove any debris or limescale. If the problem persists, contact authorized service.

How should I store the unit during winter?

Drain the water tank completely. Clean the dust filter and cooling pad, and let them dry thoroughly. Wrap the unit in its original packaging or a dust cover. Store in a dry, cool place away from direct sunlight.

USER MANUAL INN-507 Innoliving

innoliving easy tech, easy life

White air conditioner unit with black ventilation slots and a label 'Inn-living' on the front (no other text or symbols visible)

RAFFRESCATORE D'ARIA

INN-507

MANUALE D'USO

USER MANUAL

RAFFRESCATORE D'ARIA

3

Approaching requirements

Apparecchio con is

Thank you for purchasing Involving air cooler INN-507.

BEFORE USE READ CAREFULLY THIS MANUAL AND KEEP IT SAFE FOR FUTURE REFERENCES. Before using the appliance, carefully read the instructions for use and in particular the safety warnings and follow them. Keep this manual safe for the entire life of the appliance for future references. Failure to follow the instructions could cause accidents and void the warranty, relieving the manufacturer of all responsibility.

This appliance must only be used for the purpose for which it was designed, that is as an evaporative cooler for household use only. Any other use is considered improper and therefore dangerous.

IMPORTANT SAFETY NORMS

- Keep all packing material (plastic bags, cardboard, polystyrene, etc.) out of reach of children, since they are potential sources of danger and must be disposed of as provided by law.

- Make sure that the voltage indicated on the rating label matches the mains voltage before plugging in the appliance.

- Before use, check that the power cord and plug are not visibly damaged. If the cord or plug is damaged, it must be replaced by the manufacturer or by an authorized technical assistance service.

- This appliance can be used by children over 8 years old and by persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge, only under proper supervision, or if they received the instructions regarding the safe use of the device and if they understand the dangers involved. Keep the product out of reach of children younger than 8 years old.

• Make sure children do not play with the appliance.

• To unplug the power cord, always pull the plug and never the cord.

- Do not touch the plug or the power cord with wet hands.

- Disconnect the plug from the mains when the product is not in use.

- Make sure the plug has been inserted fully into the electrical socket before turning on the appliance.

• Always place the product on a flat and stable surface

• DO not use the product outdoors or near bath tub, swimming pools, showers etc.

- The water level inside the tank must never exceed the MAX level indicated in the tank itself.

- Do not insert foreign objects into the device.

- Do not obstruct the entry and exit of air in any way.

- Do not add chemicals or metals inside the water tank. These components can cause damage

to the product and compromise its correct functioning

- Avoid prolonged exposure of children and elderly to the direct flow of the ventilator.

- Do not leave the unit exposed to direct sunlight for a long period of time.

- Do not use aggressive detergents to clean the product.

- Do not allow the appliance and / or the cord to come into contact with hot surfaces.

- Do not use the product if it has fallen to the ground, if there are visible signs of damage or loss. Avoid bumps and falls.

- In case of failure or malfunction of the appliance, switch it off and do not try to tamper with it. For repairs, contact only the authorized after sales service.

GB

• Use the appliance in a well-ventilated area. During use, the appliance must be kept at a distance of at least 20 cm from the walls to guarantee correct operation of the air intakes. The appliance must not be placed immediately under or behind a curtain or similar. Do not power the appliance with blankets or similar during use.
• Keep ice tablets out of reach of children.
• Do not swallow the liquid contained inside the ice tablets.
• Make sure the product is switched off and unplugged before removing the grids or proceeding with any cleaning and maintenance operations.
• Be careful when using the product because of the possible emission of hot steam.

ASSEMBLY

1. Remove the packing material carefully, taking care not to damage the plastic body of the appliance.
2. Wheel installation. Place the wheels in the appropriate holes at the base of the device.
3. Place the device on a flat and stable surface. Keep the product away from sources of heat or open flames.
4. Filling the water tank. Turn the tank lock lever to a horizontal position and pull the tank towards you to partially pull it out. Insert the ice boards and fill the tank with water to obtain an even fresher air stream. Make sure that the water level in the tank does not exceed the MAX level indicated.
5. Replace the tank in its original position and turn the locking lever to the upright position.
6. Product must be properly assembled before being connected to the power source.

CONTROL PANEL

OFF button and ventilation speed settings

The device has three different fan speed settings: "Low", "Mid" and "High".

Press the "Low" key to allow the device to work at low speed.

Press the "Mid" button to allow the device to work at medium speed.

Press the "High" key to allow the device to work at maximum speed.

Press the OFF button to turn off the appliance.

Cooling Function (Cooler)

Press the "Cooler" button to activate the cooling function after adding the ice tablets in the tank. Attention: do not activate the cooling function if the water level in the tank is below the minimum level indicated or there is no water in the tank.

Before activating this function, check the water level and fill the tank if necessary. Replace stale

water with fresh water. It is advisable to replace the water in the tank at least once a week. Once the "cooling" function has been activated, the water pump will start to draw water from the tank, making it pass through the cooling pad; in this way the evaporated air is expelled with the help of the fan.

Swing Function

Press the "Swing" key to activate the movement of the vertical wings that will start to oscillate automatically from right to left. This function allows you to direct the air from right to left. The horizontal wings must be positioned manually to direct the airflow up or down.

How to fill the tank

Check the water level in the tank frequently, making sure that it never goes below the "MIN" level indicated in the tank itself. The activation of the "cooling" function with an insufficient amount of water may cause the malfunction of the water pump making void the warranty.

ATTENTION: Before proceeding with the filling of the tank, make sure to first disconnect the device to the mains.

How to use ice tablets

By inserting the ice tablets into the tank, a fresher jet of air can be obtained.

- Store them for a couple of hours in the freezer.

- Once the water is frozen inside them, the ice boards are ready to be stored in the tank.

Proceed by pouring the water into the tank until reaching the indicated MAX level.

CLEANING AND MAINTENANCE

Dust accumulating on the dust filter may prevent proper air flow. Therefore we recommend to clean the filter and all its parts regularly, following the instructions below. Before proceeding with any maintenance or cleaning operation, switch off the appliance and remove the plug form the main socket. Never clean the product components with flammable liquids. The vapours may cause fire or explosion

Dust Filter

To remove the dust filter, simply press the two release levels located at the top of the filter down to remove it. Use a mild detergent and a soft brush to clean and remove dust and dirt from the filter. Put the filter on again inserting the bottom firstly and pushing the upper part to lock it.

Cooling Pad

After removing the dust filter, the cooling pad is visible. Take out the pad with the appropriate protection and gently remove the pad. Use a clean, soft brush to remove dust and dirt from the pad. Rinse with water if necessary, and leave to air dry. Do not use chemical cleaning solutions that can damage the pad

Water tank

Turn the tank lock lever to a horizontal position and pull the tank towards you to partially pull it out. Before proceeding with the cleaning, remove any residual water, removing the plastic stopper on the bottom of the tank. It is advisable to place a container under the tank.

to collect the water, which will naturally start to come out of the product.

It is advisable to regularly clean the tank, as impurities and limescale deposits can damage the pump, damaging the normal operation of the device.

Cleaning the external part of the product

Clean the external part of the device with a damp cloth with the exception of the control panel and dry with a soft cloth. Do not use abrasive cleaners. Make sure the unit has been thoroughly dried before proceeding again with normal use.

WARNING: DO NOT LET WATER COME INTO CONTACT WITH THE CONTROL PANEL. CLEAN THE TOP OF THE APPLIANCE WITH A SOFT, DRY CLOTH.

TECHNICAL SPECIFICATIONS:

Description Symbol Value Unit
Max air flow F 6,0 m3/min
Fan power consumption P 65 W
Operating values SV 0,08 (m3/min)W
Electric consumption in stand by mode P	su-	W
Sound power level	Lwa	65	dB(A)
Max air speed	C	9	m/sec
Measurement Norm	IEC 60879:1986 (corr.1992)
Manufacturer	Innolving Spa Vis Merloni, 9 60131 Ancona

RATING LABEL:

This product complies with all the applicable EU directives.

Read carefully the instruction manual.

Class II insulated electrical appliance.

INFORMATION TO USERS according to Legislative Decree No. 49 of March 14, 2014 ^ 2012/19UE Implementation of the Directive on Waste Electrical and Electronic Equipment (WEEE)" The crossed-out dustbin symbol indicates that the product at the end of its life must be collected separately from other waste.

The user should, therefore, take the equipment with the essential components at the end of its useful life to the separate collection center of electronic and electrical waste, or return it to the retailer when purchasing new equipment of equivalent type, in ratio of one to one, or one to zero for devices with larger side less than 25 CM. The separate collection for the decommissioned equipment for recycling, treatment and environmentally compatible disposal contributes to avoid possible negative effects on the environment and human health and promotes recycling of the materials. Improper disposal of the product by the user entails the application of administrative sanctions according to Legislative Decree No. 49 of 14 March 2014.

CAUTION: dangerous voltage

innoliving

Innoliving Spa

Via Merloni, 9

60131 Ancona Italy

Tel 199.188.335

www.innoliving.it

MADE IN CHINA

CE

Rev.00 12.3017