52G585 - Saw Verto - Free user manual and instructions
Find the device manual for free 52G585 Verto in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Circular Saw |
| Brand | Verto |
| Model | 52G585 |
| Power Supply | Corded Electric, 1200W |
| Blade Diameter | 185 mm (7 1/4 inch) |
| Max Cutting Depth at 90° | 65 mm |
| Max Cutting Depth at 45° | 45 mm |
| No-Load Speed | 5000 rpm |
| Dimensions (L x W x H) | 30 x 20 x 15 cm |
| Weight | 2.5 kg |
| Bevel Adjustment | 0° to 45° |
| Depth Adjustment | Tool-free, lever lock |
| Blade Guard | Retractable lower guard |
| Safety Features | Safety lock-off switch, double insulation |
| Power Cord Length | 2 m |
| Maintenance | Clean after use, lubricate moving parts periodically |
| Spare Parts | Carbon brushes, blade, screws available |
| Repairability | User-serviceable with basic tools |
| Warranty | 2 years |
Frequently Asked Questions - 52G585 Verto
How do I change the blade on the Verto 52G585 saw?
Unplug the saw, press the spindle lock, and use the wrench provided to loosen the arbor nut. Remove the old blade and install the new one, ensuring the teeth face forward. Tighten the nut securely.
What is the maximum cutting depth of this saw?
At 90°, the maximum cutting depth is 65 mm. At 45°, it is 45 mm.
Can I use this saw for metal cutting?
The saw is primarily designed for wood. For metal, you need a specific metal-cutting blade and proper safety equipment. However, it is not recommended; a dedicated metal saw is better.
How do I adjust the cutting depth?
Loosen the depth adjustment lever, slide the base to the desired depth, and tighten the lever. Always ensure the blade does not extend more than necessary below the workpiece.
What type of blade does the 52G585 use?
It uses a 185 mm diameter blade with a 20 mm arbor hole. Standard combination blades for wood are suitable.
Is the saw double insulated?
Yes, the Verto 52G585 is double insulated, so it does not require a grounding wire. You can use a standard two-prong plug.
How do I clean and maintain the saw?
After each use, clean sawdust from the blade guard and vents. Periodically lubricate the pivot points with light oil. Check carbon brushes every 50 hours of use.
Why does the saw stop during use?
Possible causes: overload (let it cool), worn carbon brushes, or a tripped circuit breaker. Check brushes and replace if needed.
Can I cut at an angle other than 90°?
Yes, the base can bevel from 0° to 45°. Loosen the bevel lock, set the angle, and tighten. For accurate angled cuts, use a guide fence.
Where can I find spare parts for this model?
Spare parts such as blades, carbon brushes, and screws are available from Verto authorized dealers or online retailers. Visit the Verto website or contact support.
User questions about 52G585 Verto
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Saw in PDF format for free! Find your manual 52G585 - Verto and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 52G585 by Verto.