ABTS-35 - Portable speaker AKAI - Free user manual and instructions

Product Type	Stereo Receiver
Brand	AKAI
Model	ABTS-35
Color	Black
Dimensions (W x H x D)	430 x 140 x 320 mm
Weight	7.2 kg
Power Supply	AC 230V, 50Hz
Power Consumption	120 W
Output Power	2 x 50 W RMS (8 ohms)
Frequency Response	20 Hz - 20 kHz ±1 dB
Total Harmonic Distortion	< 0.1%
Inputs	Phono, AUX, CD, Tape, Tuner
Outputs	Speaker A/B, Headphone, Tape Rec
Signal-to-Noise Ratio	80 dB
Remote Control	Yes (infrared)
Number of Channels	2
Built-in Tuner	FM/AM
Preset Stations	30
Sleep Timer	Yes
Protection Circuit	Overload, short circuit, thermal
Cleaning Instructions	Wipe with dry cloth; avoid liquids
Accessories Included	Power cord, remote control, batteries, AM loop antenna, FM antenna, user manual

Frequently Asked Questions - ABTS-35 AKAI

How do I connect the speakers to the AKAI ABTS-35?

Connect the speaker wires to the corresponding terminals on the back panel. Ensure correct polarity: red to positive (+), black to negative (-). Use A or B terminals for each speaker pair.

Why is there no sound coming from the speakers?

Check that the speakers are properly connected, the receiver is powered on, and the correct input source is selected. Also verify that the volume is turned up and the mute function is not activated. If using the tuner, ensure the antenna is connected.

How do I clean the device?

Disconnect the power cord. Use a soft, dry cloth to wipe the exterior. Do not use any chemical cleaners or liquids. Avoid getting moisture into the vents.

Can I use headphones with this receiver?

Yes, plug your headphones into the headphone jack on the front panel. When headphones are connected, the speaker output is automatically muted.

How do I set the radio stations?

Press the TUNER button to select FM or AM. Tune to a station manually or use auto tuning. To store a preset, press the MEMORY button, then select a preset number, and press MEMORY again.

What is the maximum power output?

The AKAI ABTS-35 delivers 50 watts per channel (RMS) into 8 ohms, with both channels driven. Peak power may be higher.

How do I connect a turntable?

Connect your turntable's output cables to the PHONO input on the receiver. Ensure the turntable has a moving magnet (MM) cartridge and a ground wire (connect to the GND terminal). If your turntable has a built-in preamp, use the AUX input instead.

The remote control is not working. What should I do?

First, check that the batteries are inserted correctly and have power. Replace them if necessary. Ensure there are no obstructions between the remote and the receiver's sensor. Aim the remote directly at the front panel.

Can I bi-wire my speakers?

If your speakers support bi-wiring, you can use the A and B speaker terminals together. Remove the jumper links on the speakers and connect the tweeter and woofer sections separately to the receiver's A and B outputs. Ensure the speaker impedance remains within limits.

What should I do if the receiver overheats?

Check that the ventilation slots are not blocked. Place the receiver on a stable, open surface with at least 10 cm clearance around it. Reduce the volume level. If the protection circuit activates, turn off the receiver and let it cool down before restarting.

USER MANUAL ABTS-35 AKAI

Portable Speaker ABTS-35

Black and blue portable electronic device with a small red button (no visible text or symbols)

To ensure correct operation and avoid damage, please read this user manual carefully before using this product.

Features:

• 2.0CH portable Bluetooth speaker
• With A2DP Bluetooth, wireless stream music from any Bluetooth-enabled device
• AWS function, achieve true wireless playing with double enhanced stereo sound
• USB support
• Three modes of RGB Lighting
• FM radio
• Line-in function, suitable for PC, MID, TV and other audio devices
  ● Built-in lithium rechargeable battery 3000mAh
• Karaoke function with single input for one wired microphone (not included)

Specifications:

Bluetooth version: V5.0

Bluetooth connecting range: 10m

Bluetooth frequency: 2.4 – 2.483 GHz

AKAI

Bluetooth channel emission power: -6dBm < Pout < 4dBm

Speaker Size: 3 inch*2

RMS power output: 10W, 4Ω

Peak power output: 20W, 4Ω

Lithium-ion battery Capacity: 3.7V, 3000mAh

Play time: 5 hours at maximum volume & 6 hours at 50% volume

Frequency Response: 80HZ-16KHZ

Product size: 342(L)*138(W)*149(H)MM

Package Contents:

• 1xPortable Bluetooth Speaker
- 1xType-C Charging cable
- 1xAudio cable
- 1xUser manual

Product Details:

AKAI

① Volume Control
② Mode Button/AWS Button
③ Power Button
④ AUX Port
⑤ USB Port
⑥ Next Song
⑦ Play/Pause & RGB Light
⑧ Last Song
⑨ MIC Port
⑩ Reset Jack

11 Type-C Charging Jack

Bluetooth Mode:

Power Button: Long-press for Power On/Off.

Activate Bluetooth of mobile phone and pair with the speaker AKAI ABTS-35.

Mode Button/AWS Button: Short-press to switch the function modes, Long-press to pair or disconnect AWS.

Play/Pause & RGB Light Button: Short-press to play or pause, Long-press to switch different light modes and turn it on/off.

Last Song: Short-press for last song.

Next Song: Short-press for next song, Long-press to disconnect Bluetooth connection.

Volume Control: Rotate to adjust volume up and down.

AWS Mode:

Turn on 2 identical speakers, both under BT mode.

Select one speaker and Long-press AWS button to pair AWS, the speaker will prompt to pair, and there will be a prompt tone again after paired successfully.

Connect the paired speaker with your phone via Bluetooth and play wirelessly.

Long-press AWS button again to disconnect AWS.

FM Radio Mode:

Power Button: Long-press for Power On/Off.

Mode Button: Short-press to switch the function modes.

Play/Pause Button: Short-press to mute the speaker, Long-press to auto-search the FM Channels.

Last Song: Short-press for last channel.

Next Song: Short-press for next channel.

AKAI

Volume Control: Rotate to adjust volume up and down.

No RGB lighting in FM mode.

USB Playback Mode:

USB maximum support is 32GB

Power Button: Long-press for Power On/Off.

Mode Button: Short-press to switch the function modes.

Play/Pause & RGB Light Button: Short-press to play or pause, Long-press to switch different light modes and turn it on/off.

Last Song: Short-press for last song.

Next Song: Short-press for next song.

Volume Control: Rotate to adjust volume up and down.

AUX-IN Mode:

Power Button: Long-press for Power On/Off.

Mode Button: Short-press to switch the function modes.

Play/Pause & RGB Light Button: Short-press to play or pause, Long-press to switch different light modes and turn it on/off.

Volume Control: Rotate to adjust volume up and down.

Reset Function:

If the speaker does not turn off or respond, user can short-press the Reset Jack with a small round pin to reset the speaker.

How to charge:

• The charger is not included in the package, please charge this speaker via a standard 5V/1-3A charger or via a PC.
• Charge time should be 4-6 hours.
• The unit does not have power bank function; it is forbidden to charge other device via this unit or to connect other device via the USB port.
• To protect the battery, please do not use the speaker while it is charging.

Warning:

• Please store and use this product in an environment of normal temperature.
• Please do not expose this product to rain or moisture environment.
• Please do not disassemble, repair or modify this product by yourself without authorization.
• When cleaning this product, please use a soft cloth or with little water if needed, please do not use chemicals for cleaning.
• In order to have an extended product life and protect your hearing, please avoid listening to songs on maximum volume for long time.

AKAI

- The product is with built-in lithium battery, to avoid dangers, please do not discard or put it in the fair.

DISPOSAL OF ELECTRICAL AND ELECTRONIC EQUIPMENT

This symbol on the product or packaging means that the product should not be treated as household waste. Do not throw garbage at the end of its life, but take it to a collection center for recycling. in this way you will help to protect the environment and be able to prevent any negative consequences that it would have on the environment and human health. To find your nearest collection center:

-Contact local authorities
- Access the website: www.mmediu.ro;
- Request additional information from the store where you purchased the product.

IMPORTER: SC INTERVISION TRADING-RO SRL

Street I.C Bratianu, no. 48-52, building A, floor. 5, room 504-505, Pitesti City, Arges County, Romania

Postal code: 110121

AKAI

Black and blue portable electronic device with a handle and front panel (no visible text or symbols)

AKAI

① Reglare volum
② Buton Mod/AWS
③ Buton pornire
④ Port AUX
⑤ Port USB
⑥ Următoarea melodie
⑦ Redare/Pauză & Iluminare RGB
⑧ Ultima melodie
⑨ Port microfon
⑩ Jack resetare

Black and blue gradient portable phone with a red indicator light (no visible text or symbols)

Black and blue portable electronic device with a handle and front panel (no visible text or symbols)

AKAI

Black and blue portable electronic device with a handle and front panel (no visible text or symbols)

AKAI

Black and blue portable electronic device with a red indicator light (no visible text or symbols)

Black and blue portable electronic device with a red indicator light (no visible text or symbols)

Black handheld electronic device with blue and green gradient body (no visible text or symbols)

Black and blue handheld electronic device with a handle and speaker grille (no visible text or symbols)