CA-2DIN7135S - Media player AKAI - Free user manual and instructions
Find the device manual for free CA-2DIN7135S AKAI in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Car Multimedia Player (Double DIN) |
| Model | AKAI CA-2DIN7135S |
| Screen Size | 7 inches |
| Display Resolution | 800 x 480 pixels |
| Touchscreen | Yes, resistive touchscreen |
| Radio Tuner | FM/AM with RDS and 30 preset stations |
| Bluetooth | Version 4.0 with hands-free calling and A2DP audio streaming |
| USB Port | 1 x USB 2.0 (supports USB flash drives up to 64 GB) |
| Memory Card Slot | MicroSD card slot (up to 32 GB) |
| Audio Codecs | MP3, WMA, FLAC, WAV |
| Video Codecs | MP4, AVI, MKV, MOV, RMVB |
| Power Output | 4 x 50 watts maximum (CEA-2006 compliant) |
| Preamp Outputs | 2 pairs (front/rear) of RCA preamp outputs |
| Video Input | 1 x RCA for rear view camera (with auto-switching) |
| Auxiliary Input | 3.5 mm AUX-IN on the front panel |
| Steering Wheel Controls | Supports aftermarket steering wheel control adapters (wired) |
| Dimmer | Auto dimming via headlight connection |
| Operating Voltage | 12V DC (negative ground) |
| Dimensions (W x H x D) | 178 x 100 x 50 mm (standard double DIN) |
| Weight | 1.2 kg |
| Memory Backup | Yellow battery wire for presets and clock |
Frequently Asked Questions - CA-2DIN7135S AKAI
How do I pair my phone via Bluetooth?
Turn on Bluetooth on your phone and search for devices. Select the AKAI unit (usually named 'AKAI CA-2DIN7135S') and confirm pairing. The unit will enter pairing mode when you press the Bluetooth button on the screen or remote. No PIN is required or use 0000.
How do I connect a rear view camera?
Connect the camera's video output to the RCA video input labeled CAM IN. Connect the camera's power to a reverse light positive wire. The unit will automatically switch to the camera display when you shift into reverse if the reversing signal wire (usually purple/black) is connected to the reverse light circuit.
What file formats are supported for USB playback?
The unit supports audio formats such as MP3, WMA, FLAC, and WAV, and video formats like MP4, AVI, MKV, MOV, and RMVB. For best performance, format your USB drive as FAT32 and ensure the files are not corrupted.
How do I reset the unit to factory settings?
If the unit freezes or behaves oddly, locate the reset button (a small pinhole) on the front panel or near the SD card slot. Use a toothpick or paperclip to press and hold it for a few seconds. This will reboot the device without erasing your station presets unless you also disconnect the battery power.
Can I use the unit with steering wheel controls?
Yes, the unit has a wired steering wheel control input (usually a 3.5mm jack or a special wire). You need an SWC adapter compatible with your car model. After installation, assign functions (volume, track, etc.) through the unit's settings menu.
How do I set the time and date?
In the main menu, go to Settings (or Setup), then select 'Time' or 'Clock'. Use the on-screen keypad to set hours and minutes. If the unit has RDS, you can enable 'RDS Time Sync' to automatically update the time from radio signals.
Why is there no sound from the rear speakers?
Check the fader and balance settings in the audio menu to ensure they are centered. If the issue persists, verify the speaker wiring at the unit's harness. Ensure the blue/white wire (amplifier remote-on) is not shorted if you use an external amp. Also confirm that the mute function is off.
How do I adjust the audio equalizer?
Press the 'EQ' or 'Audio' button on the screen. You can select preset equalizer curves (Rock, Pop, Classic, Jazz) or manually adjust bass, treble, and midrange in the custom mode. Some units also offer a 5-band graphic EQ.
How do I listen to music from my phone via AUX?
Use a 3.5mm audio cable to connect your phone's headphone jack to the AUX-IN port on the front panel. Select the AUX source from the main menu. Make sure the volume on both the phone and the unit is turned up.
Is the faceplate detachable for security?
No, the double-DIN chassis does not have a detachable faceplate. For theft prevention, it is recommended to hide the unit or use a removable bracket system if available. However, you can set a PIN code in the settings to lock the controls when the unit is powered off if the feature is supported.
User questions about CA-2DIN7135S AKAI
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Media player in PDF format for free! Find your manual CA-2DIN7135S - AKAI and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. CA-2DIN7135S by AKAI.
USER MANUAL CA-2DIN7135S AKAI
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : AKAI
Model : CA-2DIN7135S
Category : Media player