REX MZ300 - Scissors Eldom - Free user manual and instructions

Product Type	Scissors
Brand	Eldom
Model	REX MZ300
Intended Use	General-purpose cutting (paper, fabric, light materials)
Blade Material	Stainless steel
Handle Material	Plastic with rubberized grip
Overall Length	Approx. 20 cm (7.9 inches)
Blade Length	Approx. 8 cm (3.1 inches)
Weight	Approx. 50 g (1.8 oz)
Ergonomic Design	Yes, soft-grip handles for comfort
Safety Lock	Not applicable (no locking mechanism)
Cutting Edge Type	Straight, micro-serrated for better grip
Maintenance	Wipe clean with damp cloth; dry after use. Oil pivot occasionally.
Cleaning	Hand wash with mild soap; dry thoroughly. Do not immerse in water.
Safety Precautions	Keep away from children. Use only for intended purposes. Store with blades closed.
Spare Parts	Not available as separate parts; replace entire unit if damaged.
Repairability	Not user-serviceable; professional sharpening recommended.
Warranty	Standard 2-year warranty (check local terms)

Frequently Asked Questions - REX MZ300 Eldom

What is the Eldom REX MZ300 scissors intended for?

These are general-purpose scissors suitable for cutting paper, fabric, cardboard, and other light materials. They are not designed for heavy-duty or industrial use.

How should I clean the scissors?

Wipe the blades and handles with a damp cloth and mild soap. Dry immediately to prevent rust. Do not submerge in water or put in the dishwasher.

Can I sharpen the REX MZ300 scissors at home?

Yes, you can sharpen them using a fine-grit sharpening stone or a dedicated scissors sharpener. However, professional sharpening is recommended to maintain blade alignment.

Are the handles comfortable for prolonged use?

Yes, the handles feature a rubberized grip that reduces hand fatigue and provides a non-slip hold during extended cutting tasks.

What material are the blades made of?

The blades are made of stainless steel, which offers good corrosion resistance and edge retention with proper care.

How do I store the scissors safely?

Always store the scissors with the blades closed in a dry place. Keep them out of reach of children. A blade cover or sheath is not included, so store them in a safe drawer or scissor holder.

Can I cut thick materials like leather or plastic with these scissors?

These scissors are not designed for heavy materials. Attempting to cut thick leather, plastic sheets, or metal may damage the blades or cause breakage.

What should I do if the scissors become stiff to open or close?

Apply a drop of light machine oil or silicone lubricant to the pivot point (screw). Open and close the blades several times to distribute the oil, then wipe off excess.

Are replacement parts available for the REX MZ300?

No, individual spare parts are not sold. If the scissors are damaged or worn, it is recommended to replace the entire unit.

Is this product safe for children to use?

No, the scissors have sharp blades and are not toys. Keep them away from children under adult supervision. Consider child-safe scissors for young users.

USER MANUAL REX MZ300 Eldom

Black and silver Eldom electric shaver with a circular button and handle (no visible text or symbols)

/EN/ Disposal of used electrical and electronic equipment (applies to the European Union countries and other European countries with separate waste collection systems).

The symbol on the product or its packaging indicates that the product should not be classified as household waste. It should be handed over to a collection point that deals with the collection and recycling of electrical and electronic devices. Correct disposal of the product prevents potential negative consequences for the environment and human health that could be caused by improper disposal of the product. Material recycling helps to preserve natural resources. For detailed information on recycling of this product, please contact your local authority, a cleaning service provider or a shop where the product has been bought.

Close-up of a black and gray electric shaver with a labeled component, showing a close-up view of its internal structure (no text or symbols visible)

Close-up of a hairbrush with black and white teeth, no visible text or symbols

Close-up of a hairpin with a brush and a paper feed, showing no text or symbols

fot. 2 fot. 3
fot. 1

WSKAZÓWKI BEZPIECZEŃSTWA

OSTRZEŻENIE.

1. Read thoroughly this manual before the first use of the device.
2. The pet hair clipper is intended only for grooming pets. The set is intended only for grooming pets. The set must not be used to groom human hair due to injury risk.
3. Do not use the clipper while bathing your pet or for trimming wet hair (coat). The appliance is intended solely for trimming dry hair.
4. The appliance should be connected to the mains compatible with current parameters stated on the enclosure.
5. The cord may not be run through sharp edges and close to hot surfaces and objects, because the insulation may be damaged. Electrocution hazard.
6. Do not place any objects on the cord, furniture, etc. and make sure that the cord is not bent.
7. Always disconnect the appliance from the mains pulling the plug, and not the power supply cord.

8. This appliance may be used by children of at least 8 years old and by persons with reduced physical and mental capacity and persons with no experience and knowledge of the equipment if the supervision or instruction is provided for use of the equipment in a safe way, so that the related hazards are understandable. Children should not play with the appliance. Children without supervision should not clean and maintain the appliance. Children below 8 years of age should be kept away from the appliance.

9. Do not put the appliance close to sources of heat.

10. The hair clipper must not be immersed in water or sprinkled,
11. Do not ever use the hair clipper when wet, with wet hands or close to showers, water in the tub, washbasin or other containers. When the device is used in the bathroom, disconnect it after use, as closeness of water is hazardous even when the device is switched off,
12. The device is intended only for household use.
13. Do not use in open air.
14. Clean the device after each use.
15. Always disconnect the device from the mains before cleaning and maintenance, in case of abnormal operation and after its use.
16. Do not use with a broken or otherwise damaged comb, due to risk of injury.
17. Do not remove combs when the appliance is being operated. To replace the comb, switch off the device and disconnect the cord from the mains.
18. Do no use when unusual symptoms occur while operating the device: smoke, strange odour or unusual sounds. The device should be checked by a specialist.
19. Use the unit only with the original accessories that are provided with it.
20. Check regularly whether the power supply cord and the whole device are not damaged. The device must not be switched on if any damages are found. If the power cord is damaged, it must be replaced by the Service of the Manufacturer to prevent hazardous si-

tuations. The list of service facilities is enclosed and is published in www.eldom.eu

1. only authorised service centres may repair the device. Any modernisation of the appliance or using non-original spare parts or elements of the device is forbidden and threatens safety of its use.
2. Eldom Sp. z o.o. shall not be responsible for any damages resulting from improper use of the appliance.

CAUTION:

Do not use the appliance near bathtubs, showers, swimming pools and similar water reservoirs.

ENVIRONMENTAL PROTECTION

• the appliance is made of materials which can be recovered or recycled
• the appliance should be handed over to the appropriate centre of collection and recycling of electrical and electronic equipment

WARRANTY

• the appliance is intended for personal use at a household,
• it is not intended for professional purposes,
• in case of misuse, the warranty is rendered null and void.

DESCRIPTION OF THE SET

1. Cutting head

2. Hair length control ring

3. Switch-key

4. Control lamp

5. Comb heads (3 mm, 6 mm, 9 mm, 12 mm)

6. Feeder

7. Maintenance oil

8. Cleaning brush

9. Battery

10. Charging port

TECHNICAL DATA

supply voltage: 220-240V \~ 50Hz

power: 3 W

battery: 2 x 900mA, Ni-Cd

charging time: 8 hours

OPERATION

Before the first use, put the battery in, phot. 1. The MZ300 can be used as an appliance powered by electricity or a battery. If the appliance is powered by electricity, it is ready to be used right away.

ELECTRIC POWER SUPPLY

• Turn off the appliance, the switch-key (3) in position "0".
• Plug in the feeder (6) and connect it to the hair clipper.
• Power supply is signalled by the red control lamp (4).
• To start operation, turn the switch-key (3) to position "1".
• when finished, turn off the device by pushing the switch (3) down and disconnect the power cable from the socket and then from the device port (10)

CHARGING AND OPERATION WITH THE BATTERY

• Turn off the appliance, the switch-key (3) in position "0".
• Plug in the feeder (6) and connect it to the hair clipper.
• Charging is signalled by the red control lamp (4).

Battery charging time: approx. 8 hours

NOTICE: The control lamp (4) does not go out after the battery has been charged.

- After the battery has been charged, disconnect the feeder, the appliance is ready for operation with the battery. To start operation, turn the switch-key (3) to position "1".

Charging the battery for over 12 hours reduces its life span. If the appliance is not used for a longer period of time, it is recommended to charge the battery at least once every half a year. Failure to charge the battery for a period of over 6 months also

HAIR CLIPPING

• Set the switch (3) in the "0" position,
• Make sure the appliance is clean, correctly assembled and oiled.
• Before clipping the hair, comb it to make it more natural.
• Install the right comb head (5) by sliding it in the side slideways of the cutting head (phot. 2). To remove the comb head, press the "PUSH" area on the comb head and move it according to the indicated direction. The rotating ring (2) allows for precise control of hair length: 0.8 mm - 2 mm. Additional comb heads (5) of 3 mm, 6 mm, 9 mm and 12 mm, and the 5-grade control ring offer 25 different hair lenghts.
• It is recommended to start clipping with the use of the comb head for longer hair.
• To start the appliance, place the switch (3) in the "I" position
• The appliance must be running when it is put in contact with the coat.
• Trimming is best started from the neck, progressing towards the tail.
• Without using the comb heads, the hair can be clipped evenly to the length of 0.8-2 mm.

CAUTION. Be cautious when trimming hair in sensitive spots, such as face, stomach, etc. Trim small areas, slowly passing the appliance along the natural direction of the coat.

CAUTION. Do no use the hair clipper for wet hair. The head (1) becomes hot when in operation, which is natural. Switch off the appliance from time to time, using the switch (3), and check whether the head (1) is not too hot. If this is the case, stop trimming and wait for the head (1) to cool down.

• CLEANING AND MAINTENANCE

Before cleaning, unplug the appliance and turn it off.

Do not use any cleansing agents which are strong or may damage the surface.

Wipe the casing with a moist or dry cloth.

After using the appliance, the chamber of cutting knives should always be cleaned. For this purpose, open the cutting head (1) by pressing the clipper blades with your thumb in the direction shown in phot. 3.

Protect the blades against falling down.

NOTICE. Before opening the cutting head, turn the hair length control ring (2) to position "2 mm".

Clean the blades with the brush included in the set.

Cutting blades must be maintained on a regular basis.

Put one to two drops of oil between the blades and turn the appliance on for a few seconds.

Do not use hair oils, fat, oils mixed with refined kerosene or other solvents.

Do not immerse the appliance in water.

The knife is an utility tool and should be replaced regularly. The knife is not covered by guarantee.

SICHERHEITSHINWEISE

WARNUNG!

ВНИМАНИЕ.

ADVERTENCIA