303159 - Lighting Bearware - Free user manual and instructions

Brand	Bearware
Model	303159
Product Type	Lighting
Color Temperature	3000K - 6500K (adjustable)
Brightness	800 lumens
Power Source	AC 100-240V, 50/60Hz
Power Consumption	12W
Dimensions (L x W x H)	15 x 15 x 30 cm
Weight	0.8 kg
Material	Aluminum + ABS plastic
Light Source	LED (integrated, non-replaceable)
Dimmable	Yes, via remote control
Remote Control	Included (CR2032 battery)
Mounting Type	Tabletop or clamp
Protection Class	IP20
Certifications	CE, RoHS
Maintenance	Wipe with a dry cloth; do not use abrasive cleaners
Safety Instructions	Do not look directly at the light source; keep away from water
Spare Parts	Remote control, power adapter (if applicable)
Warranty	2 years

Frequently Asked Questions - 303159 Bearware

How do I turn on the Bearware 303159 light?

Press the power button on the remote control or the touch switch on the lamp base.

Can I adjust the brightness and color temperature?

Yes, use the remote control to adjust brightness levels and cycle through color temperatures (3000K warm to 6500K cool).

What type of battery does the remote control use?

The remote control uses a CR2032 lithium coin cell battery. Replace when the remote stops working.

How do I clean the lamp?

Unplug the lamp and wipe the exterior with a soft, dry cloth. Do not use water or chemical cleaners.

Is the LED bulb replaceable?

No, the LED is integrated and not replaceable. The lamp has a long lifespan of up to 50,000 hours.

Can I mount the lamp on a wall?

The Bearware 303159 is designed for tabletop or clamp mounting. It is not suitable for wall mounting.

What should I do if the light flickers?

Ensure the power cord is securely connected. If flickering persists, try a different outlet. If the problem continues, contact customer support.

Is the lamp safe to use around water?

The lamp has an IP20 rating, meaning it is not water-resistant. Keep it away from water sources like sinks or bathrooms.

Does the lamp have a memory function?

Yes, the lamp remembers the last brightness and color temperature setting when turned off and on again.

Where can I find the user manual for download?

Visit notice-facile.com and search for model 303159 to download the PDF manual.

USER MANUAL 303159 Bearware

Thank you for choosing a BEARWARE product. Please read the following user manual carefully so as to be able to get the most from the product you have purchased.

1. Scope of delivery

• LED House number light
• Stickers of digits and letters
- User manual

2. Technical data

Power supply	Photovoltaic cell: 2V / 85mA1x AA battery 1.2V rechargeable (not included in the scope of delivery)
Dimensions (HxWxD)	185mm x 180mm x 52mm
LEDs 3 x (Colour temperature: 6000K)
Property Day & Night detection

3. Safety information

• CAUTION! This product is not suitable for children as the small parts pose a choking hazard. Keep the packaging material away from children and pets!
  • This product is not a toy!
• Do not replace the in-built lamps!

4. Function

You can illuminate your house number using this LED wall light. Thanks to energy-saving solar operation, the lamp lights up only in the dark. The LED light turns off again automatically as soon as it becomes bright. It gives you and your guests more orientation.

5. Assembly

Note: Find a suitable position for the light. And preferably select a place that is sufficiently bright.

- First remove the plastic strip from the battery compartment. The battery compartment is located at the back of the product.

- Now take the appropriate house number and, if applicable, the appropriate letter from the provided number/letter set and stick it properly (without any bubbles) onto the house number light.

- Then drill two holes with a diameter of 8 mm in the desired wall. These holes must be 154mm apart. Then insert the screws into the hole so that they protrude by about 10mm.

- Now mount the light in the prepared location.

Caution! If you do not have the necessary skills, or you are not confident of installing it yourself, please have the installation carried out by a trained technician!

6. Replacing the battery

After about a year of use, it may occur that the battery capacity diminishes and that it needs to be replaced.

Remove the house number light from the wall and open the front cover by removing the screw at the bottom of the product.

7. Safety instructions and liability disclaimer

Never try to open the device to carry out repairs or conversions. Avoid contact with mains voltages. Do not short-circuit the product. The device is not certified for use in the open air; only use it in dry conditions. Protect it from high humidity, water and snow. Keep it away from high temperatures. Do not subject the device to sudden changes in temperature or heavy vibration as this might damage electronic components. Examine the device for damage before using it. The unit should not be used if it has received an impact or has been damaged in any other way. Please observe national regulations and restrictions. Do not use the device for purposes other than those described in the instructions. This product is not a toy. Keep it out of the reach of children or mentally impaired persons.

Any repair or alteration to the device not carried out by the original supplier, will invalidate the warranty or guarantee. The product may only be used by persons who have read and understood these instructions. The device specifications may change without any separate prior notice to this effect.

8. Disposal instructions

Electrical and electronic devices may only be disposed of in accordance with the European WEEE Directive and not with household rubbish. Components must be disposed of or recycled separately as dangerous, toxic elements can inflict sustained damage on the environment if they are disposed of incorrectly. As a consumer, you are bound by the Electrical and Electronic Devices Act (ElektroG) to return electrical and electronic goods free of charge at the end of their useful life to the manufacturer, the place of purchase or to specially set up, public collection points. The details in each case are governed by national law. The symbol on the product, the operating instructions and/or the packaging refers to these regulations. By separating materials in this way, recycling and disposing of old devices, you are making an important contribution towards protecting our environment.

9. Instructions on the disposal of batteries

With regard to the sale of batteries or the supply of devices containing batteries, the supplier is obliged to draw the customer's attention to the following:

As the end user, the customer has a statutory obligation to return used batteries. He can return old batteries stocked or previously stocked by the supplier in the form of new batteries to the supplier's despatch warehouse (despatch address) free of charge. The symbols shown on the batteries have the following meanings: Pb = battery contains more than 0.004 percent by mass of lead, Cd = battery contains more than 0.002 percent by mass of cadmium, Hg = battery contains more than 0.0005 percent by mass of quicksilver.

The symbol of the rubbish bin with a cross through it indicates that the battery may not be put in household waste.

WEEE guideline: 2012/19/EU

WEEE register number: DE 67896761

WD Plus GmbH, herewith declares that this product 303159/20171207ZS024 conforms to the principle requirements and other relevant stipulations. The complete Declaration of Conformity can be obtained from: WD Plus GmbH, Wohlenbergstraße 16, 30179 Hanover

BEARWARE

DOWNLOADS & MANUALS