QL564TP SII - Uncategorized Aim TTi - Free user manual and instructions
Find the device manual for free QL564TP SII Aim TTi in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Programmable DC Power Supply |
| Model | QL564TP SII |
| Brand | Aim TTi |
| Number of Outputs | 3 (Triple Output) |
| Voltage Range per Channel | 0 V to 56 V |
| Current Range per Channel | 0 A to 4 A |
| Total Power | 240 W (3 x 80 W) |
| Display | Dual 4-digit LED, Voltage and Current |
| Dimensions (W x H x D) | 438 mm x 88 mm x 350 mm (1/2 2U) |
| Weight | Approx. 10.5 kg |
| Input Voltage | 100-240 V AC, 50/60 Hz |
| Modes | Constant Voltage (CV), Constant Current (CC), Series/Parallel, Tracking |
| Protection | Overvoltage (OVP), Overcurrent (OCP), Short Circuit, Thermal |
| Remote Control | USB, RS-232, GPIB (optional) |
| Ripple & Noise | < 1 mVrms, < 2 mArms |
| Programming Accuracy | ±(0.05% + 20 mV) for voltage, ±(0.1% + 20 mA) for current |
| Readback Accuracy | ±(0.05% + 20 mV) for voltage, ±(0.1% + 20 mA) for current |
| Storage | 10 memory presets |
| Cooling | Intelligent fan, variable speed |
| Safety Standards | EN 61010-1, CAT I |
| Accessories Included | Power cord, RS-232 cable, manual CD |
| Maintenance | Clean with dry cloth, avoid solvents; fuse replacement only by qualified personnel |
Frequently Asked Questions - QL564TP SII Aim TTi
How do I set the output voltage and current on the QL564TP SII?
Press the V/Set and A/Set keys on the channel you want to adjust. Use the numeric keypad to enter the desired value, then press Enter. Enable the output by pressing the Output button.
Can I connect two channels in series to get higher voltage?
Yes, the QL564TP SII supports series connection. Use the Series mode: press Menu, select Series, and choose the channels. The maximum combined voltage is 112 V (2 x 56 V).
How do I clean the power supply?
Disconnect the device from mains. Use a soft, dry cloth to wipe the exterior. Do not use solvents, abrasive cleaners, or compressed air. Keep vents free of dust.
What does the 'Remote' indicator mean?
The Remote indicator lights up when the power supply is under remote control via USB, RS-232, or GPIB. Local keypad control is disabled during remote operation.
How do I save and recall output settings?
Press Store to save current settings to a memory location (1-10). Press Recall to load a stored setting. Use the numeric keypad to select the memory number.
What is the maximum total power output?
The total power is 240 W (3 x 80 W). Each channel is limited to 80 W maximum. When used in parallel, the total current can sum but within power limits.
How do I calibrate the unit?
Calibration should be performed by qualified personnel using a calibrated multimeter. Access calibration mode via the Menu by entering the calibration password. See the service manual for detailed steps.
What type of fuse does the QL564TP SII use?
It uses a mains input fuse: 5 x 20 mm, rated T 6.3 A H 250 V. Always replace with the same type and rating.
Can I use the power supply at 240 V input?
Yes, the unit accepts 100-240 V AC, 50/60 Hz automatically. No voltage selector switch is needed.
How do I reset the device to factory defaults?
Press and hold the Menu key while powering on. Release when 'FACTORY' appears. Confirm by pressing Enter. All settings will be erased.
User questions about QL564TP SII Aim TTi
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual QL564TP SII - Aim TTi and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. QL564TP SII by Aim TTi.