COLORband Q3BT ILS - Lighting Chauvet - Free user manual and instructions
Find the device manual for free COLORband Q3BT ILS Chauvet in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | LED Wash Light |
| Brand | Chauvet |
| Model | COLORband Q3BT ILS |
| Light Source | Quad-color LEDs (RGBW) |
| Number of LEDs | 24 |
| Beam Angle | 25 degrees |
| DMX Channels | 4, 6, or 8 selectable |
| Control Protocols | DMX512, Master/Slave, Sound-Active, Standalone |
| Power Input | 100-240 VAC, 50/60 Hz |
| Power Consumption | 30 W |
| Dimensions (Length x Width x Height) | 10.6 x 3.3 x 3.9 in (270 x 85 x 98 mm) |
| Weight | 2.2 lb (1 kg) |
| Housing Material | Aluminum and plastic |
| IP Rating | IP20 (indoor use only) |
| Operating Temperature | 14-104°F (-10-40°C) |
| Cooling System | Convection |
| Included Accessories | Power cord, mounting brackets, user manual |
| Maintenance | Clean lens with a soft dry cloth; avoid solvents |
| Safety | Use only supplied power cord; do not immerse in water; keep away from flammable materials |
Frequently Asked Questions - COLORband Q3BT ILS Chauvet
How do I reset the fixture to factory defaults?
Press and hold the MODE button for 5 seconds until the display shows dEFA. Press ENTER to confirm.
Can I use this fixture outdoors?
No, the COLORband Q3BT ILS has an IP rating of IP20 and is designed for indoor use only. Exposure to moisture can cause damage.
How do I connect multiple fixtures in master/slave mode?
Set the master fixture to ArSl and slaves to ArSl as well. Connect them via DMX cables. The master will control the slaves.
What is the maximum DMX cable length?
The maximum recommended DMX cable length is 500 feet (152 meters). For longer runs, use a DMX booster.
How do I update the firmware?
Firmware updates are not user-serviceable. Contact Chauvet support for assistance.
Why is my fixture not turning on?
Check the power connection and ensure the power supply is working. If using a battery model (not applicable here), ensure battery is charged.
How do I set the DMX address?
Press MODE until dMX appears, then use UP/DOWN to set the address (001-512). Press ENTER to save.
Can I use my own mounting clamps?
Yes, but they must be rated for the fixture's weight (2.2 lb) and secured to a truss or stable surface.
How do I clean the fixture?
Unplug the fixture and wipe the lens with a soft, dry cloth. Do not use abrasive cleaners or liquids.
What is the power consumption in standby?
In standby mode, the fixture consumes less than 5 W.
User questions about COLORband Q3BT ILS Chauvet
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Lighting in PDF format for free! Find your manual COLORband Q3BT ILS - Chauvet and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. COLORband Q3BT ILS by Chauvet.
