Zosia ZMM5802P - Meat Grinder Zelmer - Free user manual and instructions

Product Type	Electric Meat Grinder
Model	ZMM5802P
Brand	Zelmer
Power	1600 W
Voltage	220-240 V
Frequency	50/60 Hz
Dimensions (L x W x H)	250 x 180 x 280 mm
Weight	3.5 kg
Housing Material	Stainless Steel and ABS Plastic
Grinding Plate Diameter	5 mm
Accessories Included	3 grinding plates (fine, medium, coarse), sausage filler, kibbeh attachment, meat pusher
Reverse Function	Yes
Overload Protection	Yes
Non-Slip Feet	Yes
Dishwasher Safe Parts	Yes (detachable parts)
Cord Length	1.2 m

Frequently Asked Questions - Zosia ZMM5802P Zelmer

What is the maximum power of the Zelmer Zosia ZMM5802P meat grinder?

The Zelmer Zosia ZMM5802P has a powerful 1600 W motor, ensuring efficient grinding of various meats.

Can I grind bones with this meat grinder?

No, this meat grinder is designed for boneless meats. Grinding bones may damage the blades and motor.

Are the grinding plates dishwasher safe?

Yes, all detachable parts including the grinding plates are dishwasher safe. However, hand washing is recommended to prolong their life.

Does the grinder have a reverse function?

Yes, it features a reverse function to help clear jams or stuck meat during operation.

What attachments are included with the ZMM5802P?

It comes with 3 grinding plates (fine, medium, coarse), a sausage filler, a kibbeh attachment, and a meat pusher.

How do I clean the meat grinder after use?

Disassemble all parts and wash them with warm soapy water or in the dishwasher. Dry thoroughly before reassembly. The motor base should only be wiped with a damp cloth.

Is the Zelmer Zosia ZMM5802P noisy?

Like most meat grinders, it produces some operational noise, but it is within normal levels for a household appliance of its power.

Can I grind vegetables or fruits with this grinder?

Yes, it can grind soft vegetables and fruits like tomatoes for sauces, but avoid hard or fibrous produce.

What safety features does the grinder have?

It includes overload protection and a safety switch that prevents operation if not assembled correctly.

How long is the power cord?

The power cord is 1.2 meters long, providing adequate reach for most kitchen counter setups.

USER MANUAL Zosia ZMM5802P Zelmer

White electric motor grater with a meshing tool, no visible text or symbols on the device body

ZMM5801P ZOSIA ZMM5802P ZOSIA

DZIEKUJEMY ZA WYBÓR MARKI ZELMER. ŻYCZYMY SATYSFAKCJI Z UŻYTKOWANIA URZĄDZENIA.

RODZAJE MASZYNEK DO MIELENIA MIĘSA MARKI ZELMER

WE WOULD LIKE TO THANK YOU FOR CHOOSING ZELMER. WE WISH THE PRODUCT PERFORMS TO YOUR SATISFACTION AND PLEASURE.

TYPES OF ZELMER MEAT MINCERS

Below, you can see an assortment of equipment anticipated for meat mincers, which the user manual refers to.

MODEL	Mincing chamber no 8	Doubleside knife	2,5 mm hole disc	4 mm hole disc	8 mm hole disc	Sausage stuffer	Shredder	Tomato juicer
ZMM5801P ZOSIA	√	√	√	√	√	√	√	X
ZMM5802P ZOSIA	√	√	√	√	√	√	√	√

DESCRIPTION

1. Drive unit
   1.a Switch
2. Mincing chamber
3. Feed screw with assembled coupling
4. Double side knife
5. 2,5 mm hole disc
6. 4 mm hole disc
7. 8 mm hole disc
8. Ring collar
9. Food tray
10. Pusher
11. Sausage stuffer
12. Separator

Mechanical safety device for the motor

1. Scroll
2. Clutch
3. Screw

Shredder accessory

1. Fine grating disc
2. Coarse grating disc
3. Pureeing disc
4. Body
5. Pusher
6. Food tray

SAFETY INSTRUCTIONS

If the supply cord is damaged it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.

Respect the operating times of the accessories indicated in their specific sections of the manual.

EN

Proceed according to maintenance and cleaning section of this manual for cleaning. Warning: potential injury from misuse!

Care shall be taken when handling the sharp cutting knives and during cleaning.

Always disconnect the appliance from the supply if it is left unattended and before assembling, disassembling or cleaning.

Switch off the appliance and disconnect from supply before changing accessories or approaching parts that move in use.

This appliance shall not be used by children. Keep the appliance and its cord out of reach of children.

Appliances can be used by persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and if they understand the hazards involved. Children shall not play with the appliance.

The device is intended for domestic use only. It is not intended for use in applications such as:

- employee kitchens in stores, offices and other work environments

- farms

- by customers in hotels, motels and other environments residential

- bed and breakfast environments

This appliance is intended for use at a maximum altitude of 2000m above sea level.

IMPORTANT WARNINGS

This appliance is designed for home use and should never be used for commercial or industrial use under any circumstances. Any incorrect use or improper handling of the product shall render the warranty null and void.

Prior to plugging in the product, check that your mains voltage is the same as the one indicated on the product label.

The mains connection cable must not be tangled or wrapped around the product during use.

Do not use the device, or connect and disconnect to the supply mains with the hands and/or feet wet.

Do not pull on the connection cord in order to unplug it or use it as a handle Unplug the product immediately from the mains in the event of any breakdown or damage and contact

Do not pull on the connection cord in order to unplug it or use it as a handle.

Do not process tough foods, such as bones, nuts (such as dry and hard soybeans) or other food with tough fiber.

Please utilize the pusher during operation, instead of pushing food by hands.

Unplug the product immediately from the mains in the event of any breakdown or damage and contact an official technical support service. In order to prevent any risk of danger, do not open the device. Only qualified technical personnel from the brand's Official technical support service may carry out repairs or procedures on the device.

B&B Trends S.L. disclaims all liability for damages that may occur to people, animals or objects, for the non-observance of these warnings.

INSTRUCTIONS FOR USE

Meat Grinder

The continuous operation should not exceed 10 minutes; suspend the operation in the event of exceeding 10 minutes and restart the machine after cooling down.

Preparing the meat mincer to work and the actuation of the appliance

Place the drive unit (1) close to the power network socket, on a firm surface so as not to cover the ventilation holes within the casing.

Before the first use of the meat mincer, wash the equipment elements.

Assemble the appropriate equipment and join it with the drive unit.

Plug in the unit.

Turn the meat mincer on with the main switch (1.a)

Operating the mincing set

Insert the following parts into the mincer body (2):

Insert the scroll (3) with the coupling facing inside. Fit the knife (4) onto the pin of the scroll (3).

Place the disc (e.g. 5) over the knife so that the protrusion in the mincer body will fit into the groove in the circumference of the disc.

Tightly fit all the elements of the mincer unit.

Fit the assembled mincer unit onto the drive unit (1) and turn it until you hear a click of the lock. It means that the body has been properly installed.

Place the tray (11) on the mincer body (2).

NB: Use only the pusher (8) to push products.

EN

Operating the sausage stuffer

Insert the following parts into the mincer body (2): Insert the scroll (3) with the coupling facing inside. Fit the insert (11) onto the pin of the scroll (3).

Fit the sausage stuffing tube (10).

Tightly fit all the elements with the threaded ring (6). Fit the assembled mincer unit onto the drive unit (1) and turn it until you hear a click of the lock.

Place the tray (7) on the mincer body (2).

Soak the casing for about 10 minutes before fitting. Fit the wet casing on the sausage filler nozzle.

NB: Make sure not to block the ventilation openings on the nozzle.

NB2: The meant cannot be "too thin". A large liquid content may cause its leakage to the inside of the mincer.

Shredder

The shredder is equipped with 3 discs. Two graters for grinding into smaller (16) and larger (17) chips (yellow cheese, carrots, celery, cooked beets, etc.). The third cutting disc (drum disc) is used for mashing vegetables (potatoes, beetroot, etc.) and fruit.

Operating the shredder

Assemble the chamber of the shredder (19) just as like mincing chamber.

Place the required cutting rolls (16-18) on feeding tube, make sure the bottom of cutting rolls is tightly compacted to the salad tube.

Cut large products into smaller elements, which you can easily put into the mincing chamber.

Do not mash soft fruits containing stones.

When the work is finished pull the power cord out from the network supply \socket.

Remove the food remaining in the shredder chamber or on the grater with a wooden spoon.

NB: blades of the disc do not require any regeneration.

Mechanical safety device for the motor

The meat mincer is equipped with mechanical protection, which secures the motor against any damage – teeth of the coupling break, when the meat mincer is overloaded (f. ex. when bones have entered into the mincing chamber).

The broken coupling should be replaced with a new one:

- unscrew the coupling from the feed screw (3),

- remove the broken coupling (2),

- put on the new coupling (2) and screw it (3).

After the work has been finished

Turn off the unit and unplug it.

Remove the pusher (8) and remove the food tray off the mincing chamber (2) or the shredder chamber.

Press the safety lock and turn the mincing set or the grating chamber into right and take it off.

Take apart all the elements of the mincing set, the chamber with the sausage stuffer or the shredder.

MAINTENANCE AND CLEANING

Before cleaning, always turn off the appliance and unplug it from the power supply.

Do not immerse the appliance and power cord in water or other liquids or wash them in the dishwasher.

Prompt: it is suggested that clean the appliance immediately after use, which is easy for cleaning.

In the event of disassembling the appliance, rotate the appliance on the opposite direction of installation direction.

When disassembling all mincing chamber or body of shredder, press on the lock button with one hand and screw off the mincing chamber or body of shredder with the other hand as the direction of the arrow shown in the right picture.

Please be careful for the disassembly of the appliance, so as not to scratch your fingers.

Do not use abrasives, scrubbers, acetone and alcohol to clean juicer.

Since some parts are relatively sharp, clean them with a brush, so as not to scratch fingers;

Neither immerse the motor in water, nor rinse it under the water tap. Water temperature for cleaning should not exceed 60^ C.

Only plastic parts are suitable for dishwashing machine.

It is forbidden to wash metal accessories in the dishwasher, as the aggressive

cleaning agents used in these devices may discolour the metal parts and damage them.

Those parts should be rinsed under running water and dried immediately.

Table of recipes

The continuous operation should not exceed 10 minutes; suspend the operation in the event of exceeding 10 minutes and restart the machine after cooling down.

Accessory	Load	Quantity	Time of operation
Mincer function	Beef	5.0 kg	10 minutes
Shredder and grater	Soaked carrots	0,5 kg	1 minute
Tomato juicer	Tomato	0,3kg	1 minute

PRODUCT DISPOSAL

This product complies with European Directive 2012/19/EU on electrical and electronic devices, known as WEEE (Waste Electrical and Electronic Equipment), provides the legal framework applicable in the European Union for the disposal and reuse of waste electronic and electrical devices. Do not dispose of this product in the bin, instead going to the electrical and electronic waste collection centre closest to your home.

ELIMINAREA PRODUSULUI

B&B TRENDS, S.L. guarantees compliance of this product for the use for which it is intended for a period of two years. In the case of breakdown during the term of this warranty, users are entitled to repair or else the replacement of the product at no charge if the former is unavailable, unless one of these options proves impossible to fulfill or is disproportionate. In this case, you can then opt for a reduction in price or cancellation of the sale, which must be dealt with directly with the sales vendor. This also covers replacement of spare parts provided that the product has been used according to the recommendations specified in this manual for both cases, and has not been tampered with by any third party that is not authorised by B&B TRENDS, S.L. The warranty will not cover any parts subject to wear and tear. This warranty does not affect your rights as a consumer in accordance with the provisions in Directive 1999/44/EC for member states of the European Union.

USE OF WARRANTY

Customers must contact a B&B TRENDS, S.L. authorised Technical Service for repair of the product. Since any tampering of the same by anyone not authorised by B&B TRENDS, S.L., or the careless or improper use of the same shall render this warranty null and void. The warranty must be fully completed and delivered along with the receipt or delivery docket for the effective exercise of rights under this warranty.

This warranty should be retained by the user as well as the invoice, receipt or the delivery docket to facilitate the exercise of these rights. For technical service and after-sales care outside the Polish territory, please submit your query to the point of sale where you purchased the item or check for further aftersales information at www.zelmer.com