IAN 53130 - Lighting Livarno Lux - Free user manual and instructions

Product Type	Floor lamp (Energy-Saving Father & Child Floor Lamp)
Model	1241/022L or 1242/022L
Brand	Livarno Lux
Operating Voltage	230-240 V ~ 50 Hz
Bulb Type (Reading Lamp)	E14, max 9W energy-saving or 25W incandescent
Bulb Type (Uplight)	E27, max 22W energy-saving or 60W incandescent
Included Bulbs	1 x E14 9W energy-saving, 1 x E27 22W energy-saving
Protection Class	I
Suitable For	Indoor dry enclosed spaces (domestic use only)
Number of Light Sources	2 (uplight and reading lamp)
Flexible Arm	Yes (reading lamp)
Switches	Two separate ON/OFF switches (uplight and reading lamp)
Assembly Required	Yes, with included tools and instructions
Care Instructions	Unplug, allow to cool, clean with dry fluff-free cloth only
Safety Precautions	Do not immerse in water, do not cover, use correct bulbs
Warranty	36 months from date of purchase
Disposal	Separate collection for electrical and electronic waste

Frequently Asked Questions - IAN 53130 Livarno Lux

How do I assemble the floor lamp?

Assembly requires a second person. First screw the support tube 19 into the upper support tube 22. Then attach the reading lamp support tube 10 to the flexible arm 5. Insert threaded rods 18 into the support tubes and attach the support tube mount 17. Place the assembly into the base 13, add washers and nuts, and tighten with the included spanner. Finally, fit the lamp glasses and bulbs.

What bulbs can I use?

For the reading lamp (E14), use only 230-240 V ~ energy-saving bulbs up to 9W or incandescent bulbs up to 25W. For the uplight (E27), use only 230-240 V ~ energy-saving bulbs up to 22W or incandescent bulbs up to 60W. Always use the correct fitting and wattage.

How do I replace a bulb?

First unplug the lamp from the mains socket. Allow the lamp to cool completely to avoid burns. Unscrew the defective bulb anticlockwise from the fitting. Then screw a new bulb clockwise into the fitting. Ensure the new bulb matches the specified type and wattage.

Why is my lamp not turning on?

Check that the mains plug is fully inserted into a working socket. Ensure both ON/OFF switches are in the correct position. If still not working, check the bulbs are screwed in properly and not defective. If the problem persists, contact a qualified electrician or service centre.

Can I use this lamp outdoors?

No, this lamp is designed only for indoor use in dry, enclosed spaces. Using it outdoors or in damp areas poses a risk of electric shock and damage.

How do I clean the lamp?

Always unplug the lamp and allow it to cool completely before cleaning. Use a dry, fluff-free cloth to wipe the surfaces. Never use water, solvents, or petrol, as these can damage the lamp and cause electric shock.

What should I do if the power cord is damaged?

If the outer flexible cable becomes damaged, it must be replaced only by the manufacturer, a service representative, or a similar qualified specialist to prevent hazards. Do not use the lamp until repaired.

Is the lamp dimmable?

No, the lamp is not dimmable. It has two separate ON/OFF switches for the uplight and reading lamp, but no dimming function.

What is the warranty period and how do I claim?

The product comes with a 36-month warranty from the date of purchase. It covers material and manufacturing defects. To claim, send the device to the service centre with the article number (1241/022L or 1242/022L). Wear parts like bulbs and damage from misuse are excluded.

How should I dispose of the lamp?

Do not dispose of the lamp with household waste. It must be taken to a recycling collection point for electrical and electronic appliances in accordance with EU regulations. The packaging is environmentally friendly and can be recycled locally.

USER MANUAL IAN 53130 Livarno Lux

Interior scene with modern floor lamps, a white vase, and a sofa in a room with curtains (no visible text or symbols)

GB IE

ENERGY-SAVING FATHER & CHILD FLOOR LAMP

Operation and Safety Notes

SE

LÅGENERGIGOLVLAMPA

Before reading, unfold the page containing the illustrations and familiarise yourself with all functions of the device.

FI

GB/IE Operation and Safety Notes Page 5

Introduction

Proper use....Page 6

Included items....Page 6

Description of parts and features......Page 6

Technical data......Page 6

Safety

Safety advice....Page 7

Preparing the product for use

Assembling the lamp....Page 8

Switching the lamp on/off......Page 8

Directing the lamp Page 8

Replacing a bulb....Page 8

Care and cleaning......Page 8

Manufacturer/Service Page 9

Declaration of Conformity....Page 9

Energy-Saving Father & Child Floor Lamp

- Introduction

Please read carefully and completely through these operating instructions. Fold out the page with the illustrations.

These instructions form part of the product and contain important information about bringing the product into use and its handling. Always observe all the safety advice. Check that the correct mains voltage is available and that all the parts have been properly assembled before bringing into use. Should you have any questions or be uncertain as to how to operate the device, please get in touch with your dealer or service point. Please keep these instructions in a safe place and hand them on to a third party if necessary.

- Proper use

This light is suitable only for interior use, in dry and enclosed spaces. This lamp is intended for use only in a domestic environment.

- Included items

Check that all the items and accessories are present and that the lamp is in perfect condition immediately after unpacking.

1 Floor lamp, Model 1241/022L or 1242/022L
2 Lamp glasses
1 Energy-saving bulb, 9 W, E 14
1 Energy-saving bulb, 22 W, E 27
2 Threaded rings
1 Tool
1 Support tube (reading lamp)
2 Threaded rods (support tube mount)
1 Support tube mount
2 Plain washers
2 Serrated lock washers
2 Nuts

1 Open spanner
1 Operating instructions

● Description of parts and features

1241/022L + 1242/022L

1 Bulb (uplight)
2 Threaded ring (uplight)
3 Lamp glass (uplight)
4 Fitting (socket) (uplight)
5 Flexible arm
6 Fitting (socket) (reading lamp)
7 Lamp glass (reading lamp)
8 Threaded ring (reading lamp)
9 | Tool
10 Support tube (reading lamp)
11 Bulb (reading lamp)
12 Mains lead with mains plug
13 Base
14 Plain washers
15 Serrated lock washers
16 Nuts
17 Support tube mount
18 Threaded rods (support tube mount)
19 Support tube (uplight)
20 ON/OFF switch (reading lamp)
21 ON/OFF switch (uplight)
22 Upper support tube

- Technical data

Model No.: 1241/022L or

1242/022L

Operating voltage: 230 - 240 V \~ 50 Hz

Bulbs: Energy-saving bulbs:

230 - 240 V

\~, E14 9 W;

E27 22 W (included)

or

230 - 240 V

\~, E14

25 W; E27 60W (not

included)

Rated max. power: 1 x 25 W (reading lamp)

1 x 60 W (uplight)

Protection class: 1/

● Safety

Safety advice

The right to claim under the guarantee shall be rendered invalid in respect of damage caused by the non-observance of these operating instructions. No liability is accepted for consequent damage. No liability is accepted for damage to property or persons caused by improper handling or non-observance of the safety advice.

To avoid danger to life from electric shock

■ Every time before connecting the lamp the mains, check it and the mains lead for damage. Never use your light if you find it is damaged in any way.
⚠️ CAUTION! A damaged light bulb means your life is at risk from electric shock. If there is any damage, repairs to be carried out or other problems related to the light bulb, please contact the service centre or a qualified electrician.
In order to prevent hazards, if the outer flexible cable of this lamp becomes damaged it may only be replaced by the manufacturer, a service representative of the manufacturer or a similar specialist!
Before assembly, ensure that the mains voltage available corresponds to the operating voltage necessary of the light (230 - 240 V\~).
■ Never let the lamp come into contact with water or other liquids.
■ Never open or insert anything into electrical fittings or equipment. Doing this sort of thing can lead to a serious danger to life from electric shock.

To avoid danger of fire and injury

⚠️ CAUTION! RISK OF INJURY! Check bulbs for damage immediately after unpacking. Do

not fit defective bulbs into the light. If they are, contact the service point for a replacement.

■ CAUTION! RISK OF INJURY FROM

BURNS! Ensure the lamp has been switched off and allowed to cool before you touch it. In this way you will avoid the danger of burns. Bulbs give off a lot of heat around the top of the lamp.

• Immediately replace the faulty light bulb with a new one. Remove the lamp from the socket before changing the light bulb.
• Do not allow any objects to cover the lamp. Fire can result from the development of too much heat.
  ■ Never leave the lamp operating unattended.
• Do not allow the lamp or the packaging materials to lie around unattended. Plastic film or bags, Styrofoam etc. can turn into dangerous toys for children.

Working safely

Use only 230 - 240 volt \~ energy-saving bulbs with an E14 fitting and a maximum power output of 9 watts for the reading lamp. Use only 230 - 240 volt \~ energy-saving bulbs with an E27 fitting and a maximum power output of 22 watts for the uplift.

or

Use only 230 - 240 volt \~ bulbs with an E14 fitting and a maximum power output of 25 watts for the reading lamp. Use only 230 - 240 volt \~ bulbs with an E27 fitting and a maximum power output of 60 watts for the uplift.

• Install the light so that it is protected from moisture and dirt.
  Prepare carefully before assembly and allow yourself enough time. Lay out all the individual components and additional tools or materials required so that you can see and reach them.
• Remain alert at all times and always watch what you are doing. Always proceed with caution and do not assemble the lamp if you cannot concentrate or feel unwell.

● Preparing the product for use

- Assembling the lamp

Note: You will require a second person to help with the assembly of the product.

Note: Assembly is identical for both models (1241/022L or 1242/022L).

☐ First screw the support tube 19 clockwise into the upper support tube 22. Ensure that the mains lead does not become trapped when it is fed through the support tubes 19, 22.
☐ Then screw the support tube 10 clockwise into the flexible arm 5.
☐ Screw the two threaded rods 18 clockwise into the support tubes 10, 19 and push the support tube mount 17 on to the threaded rods 18.
☐ Insert the floor lamp with the threaded rods 18 into the preformed holes in the base 13.
Place the plain washers 14 and then the serrated lock washers 15 from the underside of the base 13 on to the threaded rods 18. Using the open spanner, tighten the nuts 16 clockwise on to the threaded rods 18 to fix the floor lamp to the base 13.

Note: Ensure that you hold the support tubes 10, 19 and threaded rods 18 firmly in place when you are tightening the nuts 16.

☐ Push the lamp glasses 3, 7 over the fittings 4, 6. Fix the lamp glasses in place with the threaded rings 2, 8 using the tool 9.

Note: Use a dry, fluff-free cloth for inserting the bulbs.

☐ Screw the bulbs 1, 11 clockwise into the fittings 4, 6.

☐ Insert the mains plug 12 into a properly installed socket.

Your lamp is now ready for operation.

- Switching the lamp on/off

☐ Use the ON/OFF switch21 to switch the uplight on or off.

☐ Use the ON/OFF switch 20 to switch the reading lamp on or off.

- Directing the lamp

☐ Bend the flexible arm 5 to bring the reading lamp into the desired position.

- Replacing a bulb

WARNING! RISK OF ELECTRIC SHOCK!

First pull the mains plug 12 out of the mains socket.

⚠️ CAUTION! RISK OF BURNS! First allow the lamp to cool completely.

□ Unscrew the defective bulb 1, 11 anticlockwise out of the fitting 4, 6.
☐ Then screw a new bulb clockwise into the fitting.

Note: Use only 230 - 240 volt \~ energy-saving bulbs with an E14 fitting and a maximum power output of 9 watts for the reading lamp.

Use only 230 - 240 volt \~ energy-saving bulbs with an E27 fitting and a maximum power output of 22 watts for the uplift.

or

Use only 230 - 240 volt \~ bulbs with an E14 fitting and a maximum power output of 25 watts for the reading lamp. Use only 230 - 240 volt \~ bulbs with an E27 fitting and a maximum power output of 60 watts for the uplift.

● Care and cleaning

WARNING! RISK OF ELECTRIC SHOCK!

First pull the mains plug 12 out of the mains socket.

⚠️ CAUTION! RISK OF BURNS! First allow the lamp to cool completely.

WARNING! RISK OF ELECTRIC SHOCK!

For electrical safety reasons, never clean the lamp with water or other fluids nor immerse it in water.

□ Always use a dry, fluff-free cloth for cleaning.

☐ Do not use any solvents, petrol or similar. This would cause damage to the light.

- Disposal

The packaging and ancillary packing consist entirely of environmentally-friendly materials. They can be disposed of at your local recycling facility.

The symbol of the wheelie bin with the line through it means that, in the European Union, the product has to be disposed

of in a separate refuse collection. This applies to the product and to all components bearing this symbol. Products marked in this way may not be disposed of along with normal domestic waste but have to be handed in at a recycling collection point for electrical and electronic appliances. Recycling helps to reduce the consumption of raw materials and to ease the burden on the environment.

- Information

Guarantee

You receive a 36 month warranty on this product, valid from the date of purchase.

The device has been carefully produced under strict quality control.

Within the warranty period we shall rectify without charge all material and manufacturing defects. In the event of a defect arising during the warranty period, please send the device to the listed Service Centre address, making reference to the following article number: 1241/022L or 1242/022L.

Wear parts (such as bulbs) and damage caused by improper handling, non-observance of the operating instructions or unauthorised interference are excluded from the warranty.

The performance of services under the warranty does not extend or renew the warranty period.

Manufacturer / Service

● Declaration of Conformity CE

This product fulfils the requirements of the applicable European and national directives (Electromagnetic Compatibility 2004/108/EC, Low Voltage Directive 2006/95/EC). Conformity has been demonstrated. The relevant declarations and documents are held by the manufacturer.

Johdanto

1 x 60 W (loftlampe)

1 x 60 W (Deckenfluter)

Schutzklasse: I/

- Sicherheit

Sicherheitshinweise

59929 Brilon (Germany)

© by ORFGEN Marketing

Last Information Update · Tietojen tila

Informationsstatus · Tilstand af information

Abstract geometric shape resembling a stylized letter 'L' in white on a dark background (no text or symbols)