IAN 293137 - Lighting Livarno Lux - Free user manual and instructions

Product type	LED spotlight
Brand	Livarno Lux
Model	IAN 293137
Operating voltage	220 - 240 V~, 50 Hz
Power consumption	30 W
Bulb type	30 x LED 1 W (non-replaceable)
Protection rating	IP54 (spotlight), IPX4 (plug)
Protection class	I
Dimensions (L x W x H)	approx. 233 x 169 x 105 mm
Weight	max. 1620 g
Max. power of built-in socket	2500 W
Usage	Indoor and outdoor (private use)
Main functions	Adjustable lighting, on/off switch, integrated socket
Minimum safety distance	1.0 m from illuminated objects
Maintenance	Disconnect, allow to cool, clean with soft damp cloth, do not immerse
Repairability	LEDs not replaceable by user; cable not replaceable
Warranty	3 years from date of purchase
Delivery contents	1 spotlight, 1 instruction manual
Standards	CE, IP54, TÜV SÜD / GS (except HG02985-FR/BS)

Frequently Asked Questions - IAN 293137 Livarno Lux

Can I use this spotlight outdoors in rainy weather?

Yes, the spotlight has an IP54 protection rating, which protects it against water splashes. However, the mains plug must be plugged into an IPX4 socket if used outdoors.

How to replace the LEDs if they stop working?

The LEDs are not replaceable by the user. If they reach end of life, call a qualified electrician or dispose of the product.

What is the maximum power I can plug into the built-in socket?

The built-in socket supports a maximum power of 2500 W total for both sockets. Do not exceed this limit to avoid fire risk.

Does the spotlight get very hot?

Yes, during operation, the surface of the spotlight becomes very hot. Wait at least 15 minutes after switching off before touching it to avoid burns.

How to clean the spotlight?

Always disconnect the device, allow it to cool, then clean it with a slightly damp lint-free cloth and a mild detergent. Never immerse it in water.

Can I use this spotlight indoors?

Yes, it is designed for both indoor and outdoor use. Ensure a minimum distance of 1 meter from illuminated objects to avoid any fire risk.

What to do if the power cable is damaged?

The cable cannot be replaced. If the cable is damaged, the product must be disposed of for safety reasons.

Does the spotlight consume electricity when switched off?

Yes, it consumes a very low current even when off. For complete disconnection, disconnect the mains plug from the wall socket.

How to adjust the light beam?

Loosen the rotary joint screw (3) slightly to adjust the spotlight, then retighten it to keep the position.

What is the lifespan of the LEDs?

The lifespan of the LEDs is not specified in the manual, but they are designed to last many years. If they stop working, the product must be repaired by a professional or disposed of.

USER MANUAL IAN 293137 Livarno Lux

LEDWORKLIGHT

GB IE NI

LEDWORKLIGHT

Operation and Safety Notes

FR BE

PROJECTEUR À LED

GB/IE/NI Operation and Safety Notes

List of pictograms used....Page 6

Introduction......Page 6

Intended use....Page 6

Parts description Page 6

Technical data....Page 6

Scope of delivery....Page 6

General safety instructions....Page 7

Before installation Page 8

Use Page 8

Connect the plug into the socket of spotlight......Page 8

Cleaning and Care......Page 8

Disposal Page 8

Warranty Page 9

List of pictograms used
	Alternating current Power consumption period
IP54	Splash-proof (IP54) Protection class I
	LED lifespan		Product designed to withstand severe mechanical handling
	*Plugs for indoor use only(for HG02985-BS only)

LED Worklight

- Introduction

We congratulate you on the purchase of your new product. You have chosen a high quality product. The instructions for use are part of the product. They contain important information concerning safety, use and disposal. Before using the product, please familiarise yourself with all of the safety information and instructions for use. Only use the product as described and for the specified applications. If you pass the product on to anyone else, please ensure that you also pass on all the documentation with it.

Intendeduse

The product is intended to illuminate *indoor and outdoor areas. This product is only intended for private use and is not suitable for commercial use or for use in other applications.

Partsdescription

1 spotlight
2 handle
3 screw of the hinge joint
4 plug
5 switch
6 socket cover

7 socket of spotlight
8 interlock (for HG02985-BS only)

●Technicaldata

Operating voltage: 220-240V\~50Hz

Total power consumption: 30 W

Illuminant: 30 x 1 W LED

Protection class: I

Degree of protection: IP54 (splash-proof); IPX4 (For sockets of spotlight ONLY)

Socket: total max. 2500 W for two sockets.

Dimension: approx. 233 x 169 x 105 mm (VDE/FR); approx. 233 x 169 x 115 mm (BS)

Weight: max. 1620 g (VDE,FR), 1750 g (BS)

Projected area: approx. 233 x 212 mm TÜV SÜD / GS certified (not for HG02985-FR/ HG02985-BS).

- Scope of delivery

Check immediately after unpacking that the parts are complete and that the product is in proper condition.

1 LED Workshop spotlight

1 Instructions for use

Generalsafety instructions

BEFORE USING THE PRODUCT, PLEASE FAMILIARISE YOURSELF WITH ALL OF THE SAFETY INFORMATION AND INSTRUCTIONS FOR USE! WHEN PASSING THIS PRODUCT ON TO OTHERS, PLEASE ALSO INCLUDE ALL THE DOCUMENTS!

DANGER TO LIFE AND

ACCIDENT HAZARD FOR TODDLERS AND SMALL CHIL-

DREN! Never leave children unattended with the packaging material. The packaging material represents a danger of suffocation. Children frequently underestimate the dangers. Please keep the product out of the reach of children at all times.

This product may be used by children age 8 years and up, as well as by persons with reduced physical, sensory or mental capacities, or lacking experience and/or knowledge, so long as they are supervised or instructed in the safe use of the product and understand the associated risks. Children should not be allowed to play with the product. Cleaning and user maintenance should not be performed by children without supervision.
■ DANGER OF SUFFOCATION! Children could swallow and choke on small included parts (e.g. screws). Keep children away from the work area during assembly.
This product does not contain any parts that can be serviced by the user. The LEDs cannot be replaced by end user.
If the LEDs fail at the end of their lives, they must be repaired by qualified electrician or the entire product must be replaced.
The external flexible cable or cord of this product cannot be replaced; if the cord is damaged, the product shall be destroyed.

Danger to life by electric shock

■ Always check the product for damage before connecting it to the mains. Never use the product if it shows any signs of damage.
■ Protect the mains cable against sharp edges, mechanical stresses and hot surfaces.
■ Always unplug the mains plug from the socket before installation, dismantling or cleaning.
■ Disconnect the product from the mains supply if it is not going to be used for some time (e.g. holiday).
Prior to installation, verify that the mains voltage on site corresponds with the operating voltage required for the product (220-240 V\~50 Hz). Otherwise do not install the product.

CAUTION! DANGER OF BURN INJU-

RIES! To prevent burns, verify the product is switched off and has cooled down for at least 15 min before touching it. The product can become very hot.

The accessible surface, especially heat shrink, is very hot when the lamp is operating.

FIRE HAZARD! Fit the product so that it is at least 1.0 m away from the material to be illuminated. Excessive heat can result in a fire.

CAUTION! RISK OF INJURY!

Broken lamp glass must be replaced before any further use is made of

the product.

The product is only suited for use with the built-in LED control gear.
The product continues to draw a small amount of power even if the product is off as long as product is connected to supply mains. To switch the device off completely, unplug the plug 4 from socket.
The plug can only be connected with a corresponding socket with the same IP in order to keep the protective degree against dust/ water. For HG02985-BS, plug for indoor use only.

● Before installation

Note: Remove all packaging materials from the product.

Place the spotlight on a stable substrate with handle 2.
☐ Check the stability of the spotlight.
Align the spot into the desired direction. For this, you may need to slacken the screw of the hinge joint 3. After alignment, tighten the screw of the hinge joint 3 again, to ensure a secure hold of the spotlight 1.

Use

Plug the plug into the socket.
☐ Switch on the product with switch.

Note:

- Insert the plug to the corresponding IPX4 socket only during outdoor use.

- or the plug should be for indoor use if no corresponding IPX4 socket can be found.

- Connect the plug into the socket of spotlight

Open the socket cover behind the product.
Connect an additional item by plugging it into the socket of the spotlight 7 (see Fig.).
☐ Close the socket cover (For HG02985-BS).
For HG02985-BS, lock with interlock.

Note: Make sure the addition item with water proof plug.

Note: Do not connect any appliance with a total output of > 2500 W. Otherwise there is the risk of a fire.

For HG02985 / HG02985-FR:

☐ The socket of spotlight is only IPX4 protected.
☐ Insert only corresponding IPX4 plug only for outdoor use.
☐ RISK OF ELECTRIC SHOCK! Water may enter the product if incorrect plug is used

For HG02985-BS:

☐ The socket is only IPX4 protected.
☐ The socket can only protected from water when the cover is completely closed.
☐ Water may enter the product if the cover is not corrected posited.

● Cleaning and Care

■ Never immerse the product in water or other liquids. Otherwise the product can be damaged.
☐ Remove the plug 4 from the socket 7 and allow the product to cool down.
□ Clean the product with a lint-free, slightly moist cloth and mild cleaning agent.

- Disposal

The packaging is made entirely of recyclable materials, which you may dispose of at local recycling facilities.

Observe the marking of the packaging materials for waste separation, which are marked with abbreviations (a) and numbers (b) with following meaning: 1-7: plastics / 20-22: paper and fibre-board/80-98: composite materials.

The product and packaging materials are recyclable, dispose of it separately for better waste treatment. The Triman logo is valid in France only.

Contact your local refuse disposal authority for more details of how to dispose of your worn-out product.

To help protect the environment, please dispose of the product properly when it has reached the end of its useful life and not in the household waste. Information on collection points and their opening

hours can be obtained from your local authority.

- Warranty

The product has been manufactured to strict quality guidelines and meticulously examined before delivery. In the event of product defects you have legal rights against the retailer of this product. Your legal rights are not limited in any way by our warranty detailed below.

The warranty for this product is 3 years from the date of purchase. Should this product show any fault in materials or manufacture within 3 years from the date of purchase, we will repair or replace it - at our choice - free of charge to you.

The warranty period begins on the date of purchase. Please keep the original sales receipt in a safe location. This document is required as your proof of purchase. This warranty becomes void if the product has been damaged, or used or maintained improperly.

The warranty applies to defects in material or manufacture. This warranty does not cover product parts subject to normal wear, thus possibly considered consumables (e.g. batteries) or for damage to fragile parts, e.g. switches, rechargeable batteries or glass parts.

CE IP54