LiveTrak L-12 - Media player ZOOM - Free user manual and instructions
Find the device manual for free LiveTrak L-12 ZOOM in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Type of product | Digital Audio Mixer/Recorder |
| Brand | Zoom |
| Model | LiveTrak L-12 |
| Channels | 12 (8 mono + 2 stereo) |
| Inputs | 8 XLR/TRS combo, 4 line RCA, 1 stereo aux in |
| Outputs | Main stereo (2 XLR, 2 TRS), monitor (2 TRS), headphone (1/4") |
| Recording | SD card (up to 512GB), 24-bit/48kHz |
| USB interface | 16 in / 4 out, class-compliant |
| Effects | Built-in reverb, delay, chorus |
| Power supply | AC adapter (12V DC) or 8 AA batteries |
| Dimensions | 284 x 244 x 56 mm (11.2 x 9.6 x 2.2 in) |
| Weight | 2.8 kg (6.17 lbs) |
| Display | LCD screen with level meters |
| Phantom power | +48V for all mic inputs |
| Cleaning | Use a soft, dry cloth |
| Safety | Keep away from moisture and heat |
| Repairability | SD card and batteries user-replaceable; internal repairs by professional |
Frequently Asked Questions - LiveTrak L-12 ZOOM
How do I start recording on the LiveTrak L-12?
Insert an SD card (formatted FAT32). Press the REC button on the transport section to arm recording, then press PLAY to start. The LCD will show recording status.
Can I connect the LiveTrak L-12 to my computer?
Yes, use a USB cable to connect the USB port on the rear panel to your computer. The L-12 acts as a 16-in/4-out audio interface, class-compliant on Mac and Windows (no driver needed on Mac).
What type of SD card is recommended?
Use a Class 10 SDHC or SDXC card up to 512GB. Format the card to FAT32 using the L-12 or a computer. Avoid using SD cards formatted exFAT.
How do I update the firmware?
Download the latest firmware from Zoom's website. Copy the .bin file to the root of an SD card. Insert the card into the L-12, hold the REC button while powering on, then follow on-screen prompts.
How can I reset the LiveTrak L-12 to factory settings?
Power off the unit. Hold down the MONITOR MUTE button while powering on. The display will show 'Factory Reset'. Confirm by pressing the ENTER button.
Why is there no sound coming from the main outputs?
Check that the main fader is up. Ensure the MAIN MUTE button is not engaged. Verify that input channels are not muted and have their volume faders up. Also check the master gain setting.
Can I use the LiveTrak L-12 with an external effects processor?
Yes, connect the external processor to the AUX SEND output and return it to an unused stereo input channel. Adjust the aux send levels per channel to control the effect amount.
How do I monitor a specific input channel?
Press the SOLO button on the desired channel. The signal will be sent to the MONITOR output and headphone jack. The soloed channel is indicated on the display.
What should I do if the LCD screen is dim?
Go to the system menu and adjust the LCD BRIGHTNESS setting. If the screen remains dim, the LCD may be faulty; contact Zoom support.
How do I clean the LiveTrak L-12?
Unplug the power adapter. Use a soft, dry cloth to gently wipe the surface. Do not use any liquids, solvents, or abrasive materials. Avoid getting moisture into ports or faders.
User questions about LiveTrak L-12 ZOOM
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Media player in PDF format for free! Find your manual LiveTrak L-12 - ZOOM and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. LiveTrak L-12 by ZOOM.