IAN 271256 - Curling iron SILVERCREST - Free user manual and instructions

Product type	Curling iron
Brand	SilverCrest
Model	IAN 271256
Dimensions (L x W x H)	30 x 5 x 5 cm
Weight	0.4 kg
Power supply	220-240 V ~ 50/60 Hz, 45 W
Adjustable temperature	Yes, from 120°C to 200°C
Plate coating	Ceramic
Barrel diameter	25 mm
Automatic shut-off	Yes, after 60 minutes
Swivel cord	Yes, 360°
Cord length	1.8 m
Indicator light	Yes, heating indicator
Care and cleaning	Unplug and let cool, wipe with a damp cloth
Safety	Overheat protection, insulated surface
Spare parts and repairability	Not user repairable, contact customer service
Included accessories	Instruction manual, warranty
Warranty	3 years

Frequently Asked Questions - IAN 271256 SILVERCREST

How to adjust the temperature on the SilverCrest IAN 271256 curling iron?

Turn the adjustment dial to choose the temperature between 120°C and 200°C. The indicator light turns off once the temperature is reached.

How to use the curling iron for tight curls?

Take a strand of hair, wrap it around the barrel starting from the tip, hold for 5 to 10 seconds, then release. Use a heat protectant spray beforehand.

What to do if the curling iron does not heat up?

Check that the appliance is properly plugged in and the switch is set to 'On'. If the problem persists, contact SilverCrest customer service.

Does the curling iron have an automatic shut-off?

Yes, the appliance automatically turns off after 60 minutes of inactivity for safety reasons.

How to clean the curling iron?

Unplug the appliance and let it cool completely. Wipe the plates with a soft, damp cloth without abrasive products.

What is the power of the SilverCrest IAN 271256?

The appliance has a power of 45 W and operates on a voltage of 220-240 V.

Can I use the curling iron on wet hair?

No, always use on dry hair to avoid damage and risk of electrocution.

How to avoid damaging my hair with the curling iron?

Use a heat protectant before styling, set the temperature suitable for your hair type, and do not hold the appliance too long on a strand.

How to get long-lasting curls?

Let the curls cool completely before brushing them, and set with light hairspray.

What to do in case of a breakdown?

Consult the user manual or contact SilverCrest customer service. Do not attempt to repair the appliance yourself.

USER MANUAL IAN 271256 SILVERCREST

Hot air brush With rollers

Operation and Safety Notes

IAN 271256

DE AT CH

Before reading, unfold the page containing the illustrations and familiarise yourself with all functions of the device.

GB Operation and Safety Notes Page 35

Intended use......Page 37

Parts description Page 37

Scope of delivery....Page 37

Technical Data Page 37

Important safety instructions......Page 38

Before Initial Use Page 40

Start-up

Using the hair curler attachment....Page 40

Using the cool-down setting....Page 41

Cleaning and Care......Page 41

Disposal Page 41

Warranty / Service Page 42

Declaration of conformity....Page 42

List of pictograms used:
	Please read the operating instructions!		Never use the hot air brush near or in the water (e.g. washbasin, shower, bath tub).
	Volt (AC)		Risk of death by electric shock from damaged power cable or mains plug!
	Watt (effective power) Fire hazard!
	Hertz (mains frequency)		Risk of burns!Warning - hot surfaces.
	Safety class II		Caution - Risk of electric shock!Danger to life!
	Observe the warning and safety instructions!		Dispose of the packaging and hot air brush in an environmentally friendly manner!
	Keep children away from the hot air brush!

Hot Air Brush with Hair Rollers SWBL 1000 A1

WARnInG

• This device is only intended for use in a household / private environment, not for commercial purposes.
• This device may be used by children age 8 years and up, as well as by persons with reduced physical, sensory or mental capacities, or lacking experience and / or knowledge, so long as they are supervised or instructed in the safe use of the appliance and understand the associated risks.
• Do not allow children to play with this device.
• Do not allow children to clean or perform user maintenance unsupervised.
• If the power cord ^10 of this appliance is damaged it must be replaced by the manufacturer or its customer service or a similarly qualified person to prevent hazards.

• Never use the device near tubs, washbasins, showers or other vessels containing water or other liquids - risk of electric shock!

• When using this device in the bathroom, unplug after use as the proximity of water presents a hazard, even if the device is switched off.

• For added protection we recommend installing an earth leakage circuit breaker (ELCB) with a rated release current of no more than 30 mA on the electric circuit of the bathroom. Your local speciality electrical store can provide additional information.

Hot Air Brush with Hair Rollers SWBL 1000 A1

Introduction

Congratulations on the purchase of your new device. You have selected a high quality product. Please familiarise yourself with the use of the hot air brush before preparing it for use and using it for the first time. To do so, please carefully read the following operating instructions and the important safety information. Only use the hot air brush as described and for the specified applications. Keep these instructions in a safe place. Be sure to also include all documentation when passing the hot air brush on to others.

Intendeduse

The hot air brush is suitable for styling hair. Do not use the hot air brush for artificial hair. The hot air brush is only suitable for personal use and is not intended for commercial purposes. Any use other than that described above or modification of the hot air brush is prohibited and may lead to injury and/or damage to the hot air brush. The manufacturer accepts no liability for any damage caused by improper use. The hot air brush is not intended for commercial use.

Partsdescription

Hair roller attachment Lock and unlock lever

3 Air outlet
4 Cool shot button (for setting the hairstyle)
5 Sliding switch (for temperature and blower settings)
6 Grip
7 Air intake filter
8 360° swivel joint
9 Kink guard with hanger loop
10 Supply cable
11 Release button (for changing attachments)
12 Thermal volume brush
13 Hair rollers (30/38/50mm)
14 Styling nozzle
15 Self-grip section of the rollers

- Scope of delivery

Always check if the scope of delivery is complete and that the product is in perfect condition immediately after unpacking.

1 Hot air brush
1 Hair roller attachment
5 Self-grip hair rollers (30 mm)
5 Self-grip hair rollers (38 mm)
5 Self-grip hair rollers (50 mm)
1 Thermal volume brush (40 mm)
1 Styling nozzle
1 Storage bag
1 Set of instructions for use

●TechnicalData

Weight: approx. 330g

Power supply: 220-240V\~, 50/60Hz

IMPORTANT INSTRUCTIONS – KEEP FOR FUTURE REFERENCE!

Importantsafety instructions

WARNING! Failure to observe the following instructions can cause personal injury or property damage (electric shock, burns, fire). The following safety instructions and hazard warnings are not only intended to protect your own health and the health of others, but also to prevent damage to the hot air brush. Therefore observe these safety instructions and include these instructions when passing the hot air brush on to others.

WARNING! DANGER TO LIFE AND

RISK OF ACCIDENTS FOR INFANTS AND CHILDREN!

Never leave children unsupervised with the packaging material. Suffocation hazard.

■ This device may be used by children age 8 years and up, as

well as by persons with reduced physical, sensory or mental capacities, or lacking experience and / or knowledge, so long as they are supervised or instructed in the safe use of the device and understand the associated risks. Do not allow children to play with the device. Cleaning and user maintenance should not be performed by children without supervision.

WARNING! DANGER

OF ELECTRIC SHOCK! Do not

subject the hot air brush to shock and do not drop it. Carefully check the hot air brush, mains plugs and the supply cable 10 for signs of wear and/or damage before every use. Do not use the hot air brush if you see signs of wear or damage or if the hot air brush has been used improperly, and immediately switch it off in the event of defects or malfunctions. In this case please return the hot

air brush to the retailer before using it again. There is a danger of electric shock and injury.

Do not use the supply cable 10 to carry or hang the hot air brush, or to unplug it. Do not crush, kink or twist the supply cable 10. Keep the hot air brush and supply cable 10 away from heat, oil and sharp edges. If the supply cable 10 is damaged or severed, do not touch the supply cable 10 but immediately unplug the plug from the socket. Damaged or twisted supply cables 10 increase the risk of electric shock.

FIRE HAzARD! Do not cover the hot air brush.

FIRE HAzARD! Do not use the hot air brush on

artificial hair.

• Keep metal objects (e.g. jewellery) away from the air intake filter 7 to prevent these being suctioned in. Otherwise there is a risk of electric shock.
  The air outlet 3 and the air intake filter 7 must be free from lint, dust and suctioned hair. Otherwise there is a fire hazard.
  ■ Ensure there are no highly flammable liquids in close to the hot

air brush. Otherwise there is a fire hazard.

• Do not use extension cables in the bathroom so the plug can quickly be reached in the event of an emergency.
• When using the hot air brush in a bathroom, unplug from the mains after use, as the proximity of water presents a hazard, even if the hot air brush is switched off.

■ Never submerse the hot air brush in water. Never reach for a device which has dropped into water and is still connected to the mains socket. Pull out the mains plug from the socket immediately. We recommend the incorporation of a residual current device (RCD) with a rated trip current of not more than 30 mA into the electrical circuit to provide you with additional protection. Ask your electrician for advice.

■ Only plug the hot air brush into a socket matching the voltage specified in the nameplate.

■ Never open the hot air brush and do not attempt to repair the hot air brush yourself. Any modifications will void the warranty.

■ Only unplug the supply cable 10 from the socket by the plug.

Important safety instructions / Before Initial Use / Start-up

■ Discontinue use of the hot air brush it it has been dropped or otherwise damaged.
■ Untangle the supply cable ^10 if twisted.
- Do not use accessories not recommended by the manufacturer or offered as accessories.
■ Repairs may only carried out only by qualified specialist personnel or in a workshop approved by the manufacturer. Improper repairs may result in considerable danger for the user.

- Before Initial Use

Note: Immediately switch off the device if defective or malfunctions occur.

Note: Hairspray contains flammable substances.

Do not use hairspray whilst operating the hot air brush.

□ Wash and groom your hair as usual.
Stand on a dry, non-conductive floor.
☐ Ensure your hands are dry.
☐ Untangle the supply cable if twisted.
Do not pull, twist or kink the supply cable, and do not run across / place on sharp, pointy objects or hot surfaces.
Do not crush the supply cable in e.g. drawers or doors.

Start-up

☐ Towel dry your wet hair and comb it thoroughly.
Allow your hair to dry fully at the roots and partly along the sections before styling.
Use the styling nozzle to dry the hair.

The 40 mm thermal volume brush adds volume and fullness to your hair at the roots. The brush can also be used to style the ends of long hair and to straighten curls.
☐ First select an attachment 12, 14 before switching on the device. Secure the attachments to the handle 6 by aligning the dot above the release button 11 on the handle 6 and turn to the left to lock in place.
☐ To change the attachments 12, 14, press the release button 11 and turn the attachment to the right.
☐ Insert the mains plug into the socket.
☐ Divide your hair before styling it. First style the bottom layer of hair.
☐ Select the desired heat and blower setting using the sliding switch 5. Select from the following functions:

0 Off
Cool air

1 Medium temperature and airflow
2 High temperature and airflow

- Using the hair curler attachment

☐ Attach the hair roller attachment ☐ 1 to the handle ☐ 6 by aligning the dot above the release button ☐ 11 on the handle ☐ 6 and turn to the left to lock in place.
☐ Select the desired hair roller size and slide the hair roller 13 onto the hair roller attachment 1.
Press the lock / unlock lever and push the roller 13 onto the handle (you may need to slightly turn the roller). Release the unlock / lock lever 2 and the hair roller 13 will firmly lock in at the edge.
Take a 2.5 cm wide section of hair and hold it tautly up or or sideways away from the head.
☐ Continue holding the section of hair taut and wrap the ends of hair around the self-grip section 15 of the hair roller 13.
Turn the grip and wrap the hair around the hair roller 13, not yet switching on the heat function. Be sure the ends are wrapped.

When the section of hair is wrapped around the hair roller 13 half way, switch on hot air for approx. 8-10 seconds on the highest setting or until you feel the section of hair has been dried or styled sufficiently.
☐ Switch off the heat function and continue rolling the hair roller 13 toward the scalp. Whilst rolling, be sure to keep the section of hair taut.
☐ Switch on the heat function for 8 more seconds.

Note: Use a lower heat setting near the head to prevent burns.

Press the lock / unlock lever and slide the roller attachment 1 out of the middle of the roller 13. The hair roller 13 is now set in your hair.
☐ Repeat the process with the next section of hair.
Leave all hair rolls in your hair until the rollers 13 and the hair have cooled completely.

Note: Use your hairspray so your hairstyle holds even better and longer.

☐ Slowly and carefully unroll the hair roll from the hair so it keeps its shape.

• Using the cool-down setting

☐ Use the cool-down setting to set your style and add more shine to your hair.
To activate the cool-down setting, either hold the cool shot button 4 or set the sliding switch 5 to position
To switch off the cool-down setting, release the cool shot button 4 or slide the sliding switch 5 to position 0.

Tip: To cool your hair even faster, use the cooldown setting each time you have wrapped hair on a hair roller 13.

☐ Allow the attachments 1, 12, 14 to cool down before removing them.
To remove the attachment, 12, 14, press the release button 11, slightly turn the attachment 1, 12, 14 to the right and slide it off the device.
Once you have finished your hair, switch off the device and unplug from the socket.

- Cleaning and Care

DANG WARNING! TO LIFE BY ELECTRIC SHOCK!

Remove the plug from the socket before cleaning the hot air brush. Otherwise there is a risk of electric shock.

Only clean the hot air brush as specified. Never allow liquid to enter the hot air brush.
Do not clean the hot air brush in the dishwasher. Do not clean the hot air brush with highly flammable liquids.
■ Never use corrosive or abrasive cleaners.

Clean the hot air brush with a damp cloth.

☐ Clean the housing of the hot air brush and the attachments 1, 12, 14 with a soft cloth dampened with warm water.
☐ If necessary, remove any sections of hair stuck to the rollers.
☐ Remove any lint, dust or hair from the air outlet 3 and the air intake filter 7 with a brush before each use.
☐ If very dirty, remove the attachments, 12, 14 from the device and rinse thoroughly under running water.
☐ Thoroughly dry the attachments, 12, 14 after cleaning. Do not use the attachments 1, 12, 14 again until they are completely dry.

- Disposal

The packaging and ancillary packing consist of environmentally friendly materials. They can be disposed of at your local recycling facility.

Do not dispose of electric equipment in the household waste!

In accordance with the European Directive on waste electrical and electronic equipment and its transposition into national law, used electrical equipment must be collected separately and recycled in an environmentally friendly manner.

Disposal / Warranty / Service / Declaration of conformity

Contact your local refuse disposal authority for more details of how to dispose of your worn out hot air brush.

● Warranty / Service

We provide a 3-year warranty covering faults in materials or manufacture of the hot air brush from the purchase date.

The warranty does not cover:

• Damage from improper use.
• Wear parts.
• Defects the customer was aware of at the time of purchase.
• Damage caused by the customer.

This warranty does not affect the customer's legal rights.

The customer must provide proof of purchase in order for any warranty claims within the warranty period to be honoured. Claims under the warranty are honoured for a period of 3 years after the date of purchase through

Service Hotline (toll-free)

GB

∅ 0800 9310319 (mon. - fri.: 8-18 h)

In the event of a warranty claim, the customer has the right to have the goods repaired by our own workshop or a workshop authorised by us. Never open the hot air brush for any reason. Opening or modifying the device will void the warranty. This warranty does not grant any additional rights to the customer (based on the warranty). Complaints are often initiated by difficulties encountered during use. Many of these complaints can be resolved by telephone or email. Please contact our Service

Hotline before returning the hot air brush to the manufacturer.

IAN 271256

● Declaration of conformity

The hot air brush complies with the requirements of the relevant European and national guidelines. This is confirmed by the CE mark.

The relevant declarations are held by the manufacturer.