PowerMaxx SB Basic - Drill/Driver METABO - Free user manual and instructions
Find the device manual for free PowerMaxx SB Basic METABO in PDF.
| Product type | Cordless drill/screwdriver |
| Brand | Metabo |
| Model | PowerMaxx SB Basic |
| Category | Drill/screwdriver |
| Rated voltage | 10.8 V (Li-Ion) |
| No-load speed (1st / 2nd gear) | 0-400 / 0-1300 rpm |
| Max. screw torque | 24 Nm (wood), adjustable values |
| Max. drilling diameter (steel / wood / masonry) | 10 mm / 20 mm / 12 mm |
| Weight (with battery) | 1.1 kg |
| Compatible chucks | Keyless chuck, Quick chuck (depending on version) |
| Functions | Screwing, drilling, percussion drilling, adjustable torque, 2 speeds |
| Rotation direction | Right, left, transport safety (central position) |
| Protection system | Electronic monitoring (discharge, overheating, overcurrent) |
| Lighting | LED light (do not look directly) |
| Power supply | Li-Ion battery pack (not included depending on version) |
| Recommended charger | Metabo charger (ASC series, not included) |
| Optimal storage temperature | 10 °C to 30 °C |
| Sound level | LpA up to 80 dB(A) – Wear ear protection |
| Safety | Hearing protection for percussion drilling, handle insulation |
| Maintenance | Clean with a dry cloth, do not immerse |
| Repairs | By a Metabo specialist only |
| Accessories | Bit holder, Quick bit holder, case, etc. |
| Environment | Do not dispose of batteries with household waste, recycle |
Frequently Asked Questions - PowerMaxx SB Basic METABO
User questions about PowerMaxx SB Basic METABO
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
Download the instructions for your Drill/Driver in PDF format for free! Find your manual PowerMaxx SB Basic - METABO and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PowerMaxx SB Basic by METABO.
USER MANUAL PowerMaxx SB Basic METABO
PowerMaxx BS PowerMaxx BS Basic PowerMaxx BS Quick Basic PowerMaxx BS Quick Pro PowerMaxx SB PowerMaxx SB Basic
natural_image
Black and white photo of a melabo electric drill with three variants (no visible text or symbols on the drill body)
Original instructions
1. Declaration of Conformity
We, being solely responsible: Hereby declare that these cordless drills/screwdrivers and impact drills, identified by type and serial number *1), meet all relevant requirements of directives *2) and standards *3). Technical documents for *4) - see page 3.
2. Specified Use
The drills and impact drills are suitable for drilling in metal, wood, plastic and similar materials, and also for screw driving and thread tapping.
The impact drills are also suited for drilling in masonry, brickwork and stone.
The user bears sole responsibility for any damage caused by improper use.
Generally accepted accident prevention regulations and the enclosed safety information must be observed.
3. General Safety Instructions
For your own protection and for the protection of your electrical tool, pay attention to all parts of the text that are marked with this symbol!
WARNING – Reading the operating instructions will reduce the risk of injury.
WARNING Read all safety warnings and instructions. Failure to follow all safety warn-and instructions may result in electric shock, nd/or serious injury.
Keep all safety instructions and information for future reference.
Pass on your electrical tool only together with these documents.
4. Special Safety Instructions
Wear ear protectors with impact drills (machines with the designation SB). Exposure to noise can cause hearing loss.
Hold power tool by insulated gripping surfaces, when performing an operation where the cutting accessory may contact hidden wiring. A cutting accessory contacting a "live" wire may make exposed metal parts of the power tool "live" and could give the operator an electric shock.
Ensure that the place where you wish to work is free of power cables, gas lines or water pipes (e.g. check using a metal detector).
A slightly acidic, flammable fluid may leak from defective Li-ion battery packs!
If battery fluid leaks out and comes into contact with your skin, rinse immediately
with plenty of water. If battery fluid leaks out and comes into contact with your eyes, wash them with clean water and seek medical attention immediately!
Protect battery packs from water and moisture!
Do not use faulty or deformed battery packs!
Do not expose battery packs to fire!
Do not open battery packs!
Do not touch contacts or short-circuit battery packs!
If the machine is defective, remove the battery pack from the machine.
Remove the battery pack from the machine before any adjustment or maintenance is carried out.
Before fitting the battery pack, make sure that the machine is switched off.
Keep hands away from the rotating tool!
Remove chips and similar material only with the machine at a standstill.
Secure the workpiece to prevent slipping or rotation (e.g. by securing with screw clamps).
LED lights (2): Do not observe the LED radiation directly with optical instruments.
Reducing dust exposure:
Some of the particles generated using this power tool may contain substances known to e cancer, allergic reactions, respiratory
diseases, birth defects or other reproductive harm. Some examples of these substances are: lead (from lead-based paints), crystalline silica (from bricks cement, etc.), additives for wood treatment (chromate, wood preservative), some types of wood (like oak and beech dust), metals, asbestos.
The risk from exposure to such substances will depend on how long the user or nearby persons are being exposed.
Do not let particles enter the body.
To reduce exposure to these substances: work in a well ventilated area and wear protective equipment, such as dust masks that are specially designed to filter out microscopic particles.
Observe the relevant guidelines for your material, staff, application and place of application (e.g. occupational health and safety regulations, disposal).
Collect the generated particles at the source, avoid deposits in the surrounding area.
Use suitable accessories for special work. In this way, fewer particles enter the environment in an uncontrolled manner.
Use a suitable extraction unit.
Reduce dust exposure with the following measures:
- Do not direct the escaping particles and the exhaust air stream at yourself or nearby persons or on dust deposits.
ENGLISHen
- Use an extraction unit and/or air purifiers.
- Ensure good ventilation of the workplace and keep it clean using a vacuum cleaner. Sweeping or blowing stirs up dust.
- Vacuum or wash protective clothing. Do not blow, beat or brush.
Transport of li-ion battery packs:
The shipping of li-ion battery pack is subject to laws related to the carriage of hazardous goods (UN 3480 and UN 3481). Inform yourself of the currently valid specifications when shipping li-ion battery packs. If necessary, consult your freight forwarder. Certified packaging is available from Metabo.
Only send the battery pack if the housing is intact and no fluid is leaking. Remove the battery pack from the machine for sending. Prevent the contacts from short-circuiting (e.g. by protecting them with adhesive tape).
5. Overview
See page 2.
1 Chuck *
2 LED lights
3 Adjusting sleeve (torque control, maximum torque) *
4 A d j u s t i n g s l e e v e (torque limitation) *
5 Adjusting sleeve (screw driving, drilling, impact drilling) *
6 Slide-switch (1st/2nd gear)
7 Battery indicator to check the battery's charge level
8 Belth o ok
9 Rotation selector switch (direction of rotation setting, transporting safety device)
10 Trigger
11 Battery pack release button
12 Battery pack
13 Protective cap *
* depending on model
6. Use
6.1 The machine's multifunctional monitoring system
If the machine switches off automatically, the machine electronics have activated automatic protection mode. A warning signal sounds (continuous beeping). The beeping stops after a maximum of 30 seconds or when the trigger is released (10).
In spite of this protective function, overloading is still possible with certain applications and can result in damage to the machine.
Causes and remedies:
- Battery pack almost flat (the electronics prevent the battery pack from discharging totally and avoid irreparable damage).
If the battery pack is almost flat, it must be recharged.
- Long continuous overloading of the machine will activate the temperature cut-out.
Leave the machine or battery pack to cool.
Note: The machine will cool more quickly if you operate it at idling speed.
- If the current is too high (for example, if the machine seizes continuously for long periods), the machine switches off.
Switch off the machine at the trigger (10). Then continue working as normal. Try to prevent the machine from seizing.
6.2 Battery pack
Charge the battery pack before use.
If performance diminishes, recharge the battery pack.
The ideal storage temperature is between 10^ C and 30^ C.
Removing the battery pack
Press the battery pack release (11) button and remove the battery pack (12).
To fit
Slide in the battery back (12) until it engages.
6.3 Setting the direction of rotation, engaging the transporting safety device (switch-on lock)
Do not activate rotation selector switch (9) unless the motor has completely stopped!
Actuate the rotation selector switch (direction of rotation setting, transporting safety device) (9).
See page 2.
R = Clockwise setting
L = Counter-clockwise setting
0 = Middle position: transportation safety device (Switch-on lock) set
6.4 Selecting gear stage
1st gear (low speed, particularly high torque, preferable for screwing)
2 2nd gear (high speed, preferable for drilling)
6.5 Set torque limitation, screw driving, drilling, impact drill
Machines with the designation BS...
1...20 = Set torque (with torque limitation) by turning the sleeve (3) - intermediate settings are also possible.
= Set drilling by turning the sleeve (3) (max. torque, without torque limitation)
To avoid overloading the motor, do not jam the spindle.
Machines with the designation SB...:
= Set screw driving by turning the sleeve (5)
AND
set the torque (with torque limitation) by turning the sleeve (4) - intermediate settings are also possible.
= Set drilling by turning the sleeve (5) (max. torque, without torque limitation) To avoid overloading the motor, do not jam the spindle.
Set impact drilling by turning the sleeve (5) (max. torque, without torque limitation) To avoid overloading the motor, do not jam the spindle.
6.6 Change accessory
Opening the drill chuck:
Turn the drill chuck sleeve (1) clockwise.
Clamping the tool:
Open the drill chuck and insert the tool as far as possible. Turn the drill chuck sleeve (1) in clockwise direction until the tool is clamped securely. With a soft tool shank, retightening may be required after a short drilling period.
6.7 Switching power tool on/off, setting speed
To start the machine, press the trigger (10). The speed can be changed by pressing in the trigger.
6.8 Chuck with Quick replacement
system (for PowerMaxx BS Quick...)
To remove: See page 2, fig. A. Push the interlock ring forward (a), advance and pull off the chuck (b).
To mount: Push the interlock ring forward and move the chuck as far as the limit stop on the drill spindle.
6.9 Chuck (for PowerMaxx BS)
See page 2, fig. B.
To mount: unscrew protective cap (13). Screw the quick-clamping chuck onto the spindle thread. The quick-clamping chuck can be tightened (and released again) with an open-jawed spanner.
7. Tips and Tricks
When working with long screw bits or bit holders, we recommend the use of the bit clamping bush 6.31281 (see Accessories chapter).
8. Accessories
Only use original Metabo battery packs and Metabo accessories.
See page 4.
Only use accessories which fulfil the requirements and specifications listed in these operating instructions.
A Quick-clamping chuck.
Fitting, PowerMaxx BS: unscrew protective cap (13). Screw the quick-clamping chuck onto the spindle thread. The quick-clamping chuck can be tightened (and released again) with an open-jawed spanner.
B Battery pack
C Angle screwdriver attachment.
D Battery charger
E Bit clamping bush
F Bit holder with Quick replacement system
G Bit box
For a complete range of accessories, see www.metabo.com or the catalogue.
9. Repairs
Repairs to electrical tools must be carried out by qualified electricians ONLY!
If you have Metabo electrical tools that require repairs, please contact your Metabo service centre. For addresses see www.metabo.com.
You can download spare parts lists from www.metabo.com.
10. Environmental Protection
Observe national regulations on environmentally compatible disposal and on the recycling of disused machines, packaging and accessories.
Battery packs must not be disposed of with regular waste. Return faulty or used battery packs to your Metabo dealer!
Do not allow battery packs to come into contact with water!
To protect the environment, do not dispose of power tools or battery packs in household waste. Observe national regulations on separated collection and recycling of disused machines, packaging and accessories.
Before disposal, discharge the battery pack in the power tool. Prevent the contacts from short-circuiting (e.g. by protecting them with adhesive tape).
11. Technical Specifications
Explanatory notes on the specifications on page 3.
Changes due to technological progress reserved.
U = Voltage of battery pack
n = No-load speed
Tightening torque for screwing:
M_A =soft screwing application (wood)
M_B =hard screwing application (metal)
M_C = adjustable torque (with torque control)
Max. drill diameter:
D 1 max = in steel
D_2=in softwood
D_3 max= in masonry
s = m a x . i m p a
m = weight (with battery pack)
G = spindle thread
Measured values determined in conformity with EN 60745.
--- Direct current
ENGLISHen
The technical specifications quoted are subject to tolerances (in compliance with the relevant valid standards).
Emission values
Using these values, you can estimate the emissions from this power tool and compare these with the values emitted by other power tools. The actual values may be higher or lower, depending on the particular application and the condition of the tool or power tool. In estimating the values, you should also include work breaks and periods of low use. Based on the estimated emission values, specify protective measures for the user - for example, any organisational steps that must be put in place.
Vibration total value (vector sum of three directions) determined in accordance with EN 60745:
$$ \begin{array}{l} \begin{array}{r l} a _ {h, I D} & = \text { Vibration emission value } \ & \quad (\text { impact drilling into concrete }) \end{array} \ \begin{array}{r l} a _ {h, D} & = \text { Vibration emission value } \ & \text {(drilling into metal)} \end{array} \ \begin{array}{r l} a _ {h, S} & = \text { Vibration emission level (screwing } \ & \text { without impact) } \end{array} \ K _ {n, \dots} = \text { Uncertainty (vibration) } \ \end{array} $$
Typical A-effective perceived sound levels::
L_pA = Sound pressure level
L_WA = Acoustic power level
K_pA , K_WA= Uncertainty (noise level)
During operation the noise level can exceed 80 dB(A).
Wear ear protectors!
Notice originale
K_h, = incertitude (vibration)
Transport van Li-ion-occupacks:
D 2 max = in zacht hout
D_3=in metselwerk
s = max. slagfrequentie
a_h,D = trillingsemissiewaarde (boren in metaal)
--- Corrente contínua
5 Kappe (Skruning, boring, slagboring) *
6 Gearskifter (1./2. gear)
a_h, ID = Vibrationsemission (slagboring i beton)
a_h,D =Vibrationsemission (boring i metal)
a_h,S = Vibrationsemission (skruning uden slag)
K_n, = Usikkerhed (vibration)
- PowerMaxx BS PowerMaxx BS Basic PowerMaxx BS Quick Basic PowerMaxx BS Quick Pro PowerMaxx SB PowerMaxx SB Basic
- Original instructions
- Declaration of Conformity
- Specified Use
- General Safety Instructions
- Special Safety Instructions
- Reducing dust exposure:
- ENGLISHen
- Transport of li-ion battery packs:
- Overview
- Use
- The machine's multifunctional monitoring system
- Causes and remedies:
- Battery pack
- Removing the battery pack
- To fit
- Setting the direction of rotation, engaging the transporting safety device (switch-on lock)
- Selecting gear stage
- Set torque limitation, screw driving, drilling, impact drill
- Machines with the designation BS...
- Machines with the designation SB...:
- Change accessory
- Opening the drill chuck:
- Clamping the tool:
- Switching power tool on/off, setting speed
- Chuck with Quick replacement
- Chuck (for PowerMaxx BS)
- Tips and Tricks
- Accessories
- A Quick-clamping chuck.
- Repairs
- Repairs to electrical tools must be carried out by qualified electricians ONLY!
- Environmental Protection
- Technical Specifications
- Emission values
- Notice originale
- Transport van Li-ion-occupacks:
Brand : METABO
Model : PowerMaxx SB Basic
Category : Drill/Driver