CBG52SX - Range hood CANDY - Free user manual and instructions

Product type	Built-in extractor hood
Brand	Candy
Model	CBG52SX
Cutout dimensions (W x D)	490 x 250 mm
Minimum distance above hob	60 cm
Maximum distance above hob	75 cm
Extraction duct diameter	150 mm
Motor type	Electric motor with centrifugal fan
Number of speeds	3 (low, medium, high)
Lighting type	LED
Lighting power	2 W (max. 220 V)
Grease filter type	Non-stick filter, dishwasher safe
Grease filter cleaning frequency	Monthly
Activated carbon filter (optional)	Yes, for recirculation mode
Activated carbon filter replacement frequency	At least once a year
Electrical class	Class I (earth connection mandatory)
Recommended fuse	3 A
Wire colours (L / N / Earth)	Brown (L) / Blue (N) / Green-yellow (Earth)
Intended use	Household only, not for barbecue or commercial use
Housing maintenance	Soft cloth with soapy water, no abrasive products
Disposal	Do not dispose with household waste, recycle according to WEEE directive

Frequently Asked Questions - CBG52SX CANDY

What is the recommended installation height for the Candy CBG52SX hood?

The hood should be installed at a distance of 60 to 75 cm above the cooking surface for optimal operation.

How to clean the hood's grease filter?

The grease filter should be cleaned monthly. Use a household detergent or wash it in the dishwasher. Do not use abrasive sponges.

When should the activated carbon filter be replaced?

The activated carbon filter should be replaced at least once a year, especially if the hood is used frequently in recirculation mode.

How to change the LED bulb of the hood?

Turn off and unplug the hood. Remove the lamp cover (2 screws), unscrew the LED bulb and replace it with an identical bulb: LED 220 V, max. 2 W.

What to do if the hood vibrates strongly?

Check that the motor is securely fastened and that the hood is properly suspended. If the fan blade is damaged, call a qualified technician.

The hood draws poorly, what to check?

Ensure that the distance between the hood and the hob is between 65 and 75 cm. Clean the grease filter and check that no obstacle blocks the extraction.

Do I need to earth the hood?

Yes, the hood is Class I and must be connected to an earthed socket. Failure to comply with this instruction exposes you to the risk of electric shock.

Can I use the hood with a gas hob?

Yes, but never flambé directly under the hood. Ensure good ventilation of the room if the hood and other gas appliances are used simultaneously.

How to install the activated carbon filter?

First detach the grease filter (press the lock). Insert the carbon filter into the hood and turn it clockwise until locked. Repeat on the other side.

What to do in case of malfunction of the light and motor?

Check that the hood is plugged in and that the fuse has not blown. If the bulb is burnt out, replace it. If the problem persists, contact a qualified technician.

USER MANUAL CBG52SX CANDY

INSTALLATION AND USER'S MANUAL

CONTENT

INTRODUCTION....3

SAFETY PRECAUTION....3-4

PREPARE FOR INSTALLATION....6

SPECIFICATIONS....7

INSTALLATION....7-8

OPERATION....9

MAINTENANCE....10

TROUBLESHOOTING....11

ENVIRONMENTAL PROTECTION....11

INTRODUCTION

Thank you for choosing this cooker hood.

This instruction manual is designed to provide you with all required instructions related to the installation, use and maintenance of the appliance.

In order to operate the unit correctly and safely, please read this instruction manual carefully before installation and usage.

The cooker hood uses high-quality materials and features a streamlined design. Equipped with a large-power electric motor and centrifugal fan, it provides strong suction power, low noise operation, a non-stick grease filter, and easy assembly.

SAFETY PRECAUTIONS

• Never let children operate the machine.
• The cooker hood is for home use only, not suitable for barbecue, roast shops, or other commercial purposes.
• The cooker hood and its filter should be cleaned regularly to keep it in good working condition.
• Clean the cooker hood according to the instruction manual and keep the unit away from fire hazards. There is a risk of fire if cleaning is not carried out in accordance with the instructions.
• Do not place the cooker hood directly above a gas cooker with open flames.
• Please ensure good ventilation in the kitchen.
• If the supply cord is damaged, it must be replaced by the manufacturer, its service agent, or similarly qualified persons to avoid a hazard.
• There shall be adequate ventilation of the room when the range hood is used at the same time as appliances burning gas or other fuels.
• The air must not be discharged into a flue that is used for exhausting fumes from appliances burning gas or other fuels.
• Regulations concerning the discharge of air must be fulfilled.
• This appliance can be used by children aged 8 years and above and persons with reduced physical, sensory, or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
• Children should be supervised to ensure that they do not play with the appliance.
• Cleaning and user maintenance shall not be made by children without supervision.
• Do not flame under the range hood.
• CAUTION: Accessible parts may become hot when used with cooking appliance.
• The warning shall be in the same part of the instructions that include details of how to mount the equipment.

Electrical Shock Hazard

- Only plug this unit into a properly earthed outlet. If in doubt seek advice from a suitably qualified engineer.

- Failure to follow these instructions can result in death, fire, or electrical shock.

The lamp used in this product is not suitable for use in the lighting of a room.

The purpose of this lamp is to provide illumination for using the product.

Electrical Installation

All installation must be carried out by a competent person or qualified electrician. Before connecting the mains supply ensure that the mains voltage corresponds to the voltage on the rating plate.

Direct Connection

The appliance must be connected directly to the mains using an omnipolar circuit breaker with a minimum opening of 3mm between the contacts.

The installer must ensure that the correct electrical connection has been made and that it complies with the wiring diagram.

The cable must not be bent or compressed.

Regularly check the power plug and power cord for damage. If the supply cord is damaged, it must be replaced by a special cord or assembly available from the manufacturer or its service agent.

WARNING: This is a Class I appliance and MUST be earthed

This appliance is supplied with a 3 core mains cable coloured as follows:

Brown = L or Live

Blue = N or Neutral

Green and Yellow = E or Earth

The fuse must be rated at 3 Amps.

Prepare for installation:

a. If you have an outlet to the outside, your cooker hood can be connected as below picture by means of an extraction duct (enamel, aluminum, flexible pipe or inflammable material with an interior diameter of 150mm)

b. Before installation, turn the unit off and unplug it from the outlet.

c. The cooker hood should be placed at a distance of 60~75cm above the cooking plane for best effect.

Specifications

Installation

- The typical installation method for your range hood is into a purpose built overhead/wall cabinet.

- Using a jigsaw, create the required cut-out for your range hood, as 490 × 250mm

• Make sure the cut-out is at least 35mm from the cabinet edge.
• Remove the grease filter and remove the 2 screws on the panel.
• Screw the range hood into the cabinet using 8 screws (supplied).
• Re-fit the panel with the 2 screws (previously removed).

Activated carbon filter can be used to trap odors.

In order to install the activated carbon filter, the grease filter should be detached first. Press the lock and pull it downward.

Plug the activated carbon filter into the unit and turn it in clockwise direction. Repeat the same on the other side.

NOTE:

○ Make sure the filter is securely locked. Otherwise, it would loosen and cause danger. - When activated carbon filter attached, the suction power will be lower.

DESCRIPTION OF COMPONENTS

OPERATION

Off button 0

It's used for turning off the fan.

Low Speed button

It's used for ventilation in the kitchen. It is suitable for simmering and cooking that do not produce much steam.

Medium Speed button

Airflow speed is ideal for ventilation during standard cooking operations.

High Speed button

When high density of smoke or steam is produced, press the high-speed button for the most effective ventilation.

NOTE: If Low / Medium / High speed buttons are pressed at the same time, the unit will only operate at the highest speed.

Light button

MAINTENANCE

Before cleaning, switch the unit off and pull out the plug.

I. Regular Cleaning

Use a soft cloth moistened with hand-warm mildly soapy water or household cleaning detergent. Never use metal pads, chemical, abrasive material, or stiff brushes to clean the unit.

II. Monthly Cleaning for Grease Filter

ESSENTIAL: Clean the filter every month to prevent any risk of fire.

The filter collects grease, smoke, and dust... so the filter directly affects the efficiency of the cooker hood. If not cleaned, the grease residue (potentially flammable) will saturate the filter. Clean it with household cleaning detergent.

III. Annual Cleaning for Activated Carbon Filter

Apply SOLELY to unit that installed as a recirculation unit (not vented to the outside). This filter traps odours and must be replaced at least once a year depending on how frequent the cooker hood used.

III. Bulb Replacement

1. Switch the unit off and unplug the appliance.
2. Remove the lamp cover by unscrewing the 2 screws.
3. Unscrew the LED lamp
4. Replace with the same type and lamp

● LED lamp (220V max, 2W).

TROUBLESHOOTING

Fault	Cause	Solution
Light on, but fan does not work	The fan blade is jammed.	Switch of the unit and repair by qualified service personnel only.
	The motor is damaged.
Both light and fan do not work	light bulb burn.	Replace the bulb with correct rating.
	Power cord looses.	Plug in to the power supply again.
Serious Vibration of the unit	The fan blade is damaged.	Switch of the unit and repair by qualified service personnel only.
	The fan motor is not fixed tightly.	Switch of the unit and repair by qualified service personnel only.
	The unit is not hung properly on the bracket.	Take down the unit and check whether the bracket is in proper location.
Suction performance not good	Too long distance between the unit and the cooking plane	Readjust the distance to 65-75cm

ENVIRONMENTAL PROTECTION

Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your Local Authority or retailer for recycling advice.

This appliance is marked according to the European directive 2012/19/EU on Waste Electrical and Electronic Equipment (WEEE).

By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product.

The symbol on the product indicates that this product may not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment

Disposal must be carried out in accordance with local environmental regulations for waste disposal.

For more detailed information about treatment, recovery and recycling of this product, please contact your local city office, your household waste disposal service or the shop where you purchased the product.

Note:

Installation

Note:

Troubleshooting

INSTALLATION....38-39

OPERATION 40

MAINTENANCE 41

TROUBLESHOOTING 42

ENVIRONMENTAL PROTECTION 42

INTRODUCTION

Blue = N or Neutral

Installation

TROUBLESHOOTING

The appliance must be connected directly to the mains using an omnipolar circuit breaker with a minimum opening of 3mm between the contacts.

The cable must not be bent or compressed.

Installation

NOTE:

TROUBLESHOOTING

Installation

NOTE:

TROUBLESHOOTING

Blue = N or Neutral

Installation

NOTE:

TROUBLESHOOTING

Installation

TROUBLESHOOTING

Installation

NOTE:

Installation

The activated carbon filter can be used to capture odors. To install the activated carbon filter, the grease filter should first be removed. Press the lock and pull it downwards.

TROUBLESHOOTING

c. Install the kitchen hood at a distance of 60-75 cm above the cooking surface for optimal performance.

Specifications

Installation

Install the activated carbon filter into the unit and turn it clockwise. Repeat the same on the other side.

NOTE:

TROUBLESHOOTING

Installation

NOTE:

INSTALLATION

NOTE:

Installation

NOTE.

Installation

NOTE.

TROUBLESHOOTING....168

ENVIRONMENTAL PROTECTION 168

INTRODUCTION

Installation

NOTE.

TROUBLESHOOTING