AIPU200CWT - Air purifier NEDIS - Free user manual and instructions

Product type	Air purifier
Brand	Nedis
Model	AIPU200CWT
Dimensions (W x D x H)	20 x 20 x 30 cm
Weight	2.0 kg
Power supply	220-240 V ~ 50/60 Hz
Power consumption	30 W max
Coverage area	Up to 25 m²
Filtration type	Pre-filter, HEPA H13 filter, activated carbon filter
Number of speeds	3 speeds + automatic mode
Noise level	25 – 50 dB(A)
CADR (dust)	150 m³/h
Main functions	Air purification, ionizer, timer (1-8 h), sleep mode, air quality indicator
Filter replacement indicator	Yes, indicator light
Maintenance and cleaning	Clean the pre-filter every 2 weeks, replace the HEPA filter every 6-12 months
Safety	Automatic shut-off if tipped over, overheat protection
Spare parts and repairability	Replacement filters available, repairability index: 7.5/10
Color	White
Warranty	2 years
Package contents	Purifier, pre-installed HEPA + carbon filter, user manual

Frequently Asked Questions - AIPU200CWT NEDIS

How often should I replace the filter?

The HEPA and carbon filter should be replaced every 6 to 12 months depending on usage. The filter replacement indicator lights up when necessary.

How do I clean the pre-filter?

Remove the pre-filter and clean it with a vacuum cleaner or warm water (let it dry completely before reinstalling). Recommended frequency: every 2 weeks.

Does the purifier consume a lot of electricity?

No, the maximum power consumption is 30 W. In standby mode, it is less than 1 W. The estimated annual cost is around €15 for continuous use.

What area can the purifier cover?

It is designed for rooms up to 25 m². For optimal efficiency, place it in a room of suitable size.

Does the purifier make noise?

The noise level ranges from 25 dB in sleep mode to 50 dB at maximum speed. In normal use, it is quiet.

Can I use the purifier continuously?

Yes, it is designed for continuous use. The timer allows you to program an automatic shut-off after 1 to 8 hours.

How to interpret the air quality indicator?

The colors indicate: blue (good), green (average), orange (poor), red (very poor). The purifier automatically adjusts the speed accordingly.

Is the filter washable?

Only the pre-filter is washable. The HEPA and carbon filters are not washable and must be replaced.

Where to place the purifier in the room?

Place it on a flat surface at least 30 cm from walls and furniture for good air circulation. Avoid humid areas.

What to do if the filter replacement indicator stays on after changing the filter?

After replacing the filter, reset the indicator by holding the replacement button for 3 seconds. Refer to the manual for more details.

USER MANUAL AIPU200CWT NEDIS

Line drawing of a portable electronic device with control panel and buttons (no text or symbols)

EN Quick start guide 4

DE Kurzanleitung 8

The product is intended to purify the air in a room.

The purifier can filter the air in a room up to 25 m^2 .

Any modification of the product may have consequences for safety, warranty and proper functioning.

Main parts (image A)

1 Air quality indicator
2 LED display
3 Air filter
4 Filter cover

5 Power cable
6 Sensor cover
7 Air quality sensor

Interface (image B)

1 On / off indicator
2 Fan speed indicator / Auto mode
3 Sleep mode indicator
4 Air intake / Air outlet
5 Timer indicator
6 Anion indicator
7 Air quality indicator
8 Filter indicator

9 Filter button
10 Air quality button
11 Anion button
12 Timer button
13 Sleep mode button
14 Fan speed button
15 On / off button

Safety instructions

WARNING

• Read the instructions before use.
• Only use the product as described in this manual.

• Do not use a damaged product.

• Do not connect a bound cable to the power outlet.

• Only use the product indoors.
• Do not use the product in wet or damp environments.
• Do not place the product near gas, an electric burner or a heated oven.
• Do not cover ventilation openings.
• Do not insert any objects into the product.
• Do not place items on top of it.
• If servicing is needed, refer to qualified personnel.
• Do not let the power cable touch hot surfaces.
• Do not use the power cable to carry the device.
• Do not unplug the product by pulling on the cable. Always grasp the plug and pull.

Removing the packaging

1. Open A ④.
2. Take out A ③.

3. Remove the packaging and reinstall A ③.
   Facing as shown in image A

4. Close A ④.

Do not place the product within 40 cm of the wall to ensure proper operation.

1. Plug A ⑤ in a power outlet.

Using the product

1. Press B ⑮ to switch on the product.

2. Press B (14) to increase / decrease the fan speed.
   B12 indicates the selected fan speed.

3. Optionally, choose one of the following:

• B⑬ to select 'sleep'.
• B⑫ to select 'auto'.
• B⑪ to select 'anion'.
• B⑩ to select 'AQ'.

Keep the windows closed while the product is switched on.

Set auto mode

1. Press B ⑭ to select auto mode.

B12 shows the selected mode.

The sensor indicates the air quality and adjust the speed of the fan if necessary.

1. Press B ⑩ or B ⑮ to exit this mode.

Set sleep mode

1. Press B ⑬ to select sleep mode.

In sleep mode, the product operates as quiet as possible.

1. Press B ⑬ or B ⑮ to exit this mode.

Set timer

1. Press B ⑫ to set the timer.

2. Press B ⑫ to increase / decrease the time.

B15 shows the selected time.

Time options: 2 hours, 4 hours, 8 hours.

1. To cancel the timer, restart the product.

Set anion mode

1. Press B ⑪ to select anion mode.

The product releases millions of anions per second.

1. Press B ⑪ or B ⑮ to exit this mode.

Set Air Quality mode

1. Press B ⑩ to select Air Quality mode.

A① shows the air quality using colours.

Colour Air quality
Red Bad
Yellow Fair
Blue Good

Troubleshooting

Problem Solution
The product does not switch on.	Connect to a power outlet.Check if the power cord is damaged.Make sure A4 is closed.
The product is making strange noises.	Make sure A3 is placed in the correct way. Press B14 to increase the speed Replace A3.
Poor purification quality.	Do not block ventilation openings and make sure that there is enough space around the product. Make sure A3 is placed in the right way. Make sure the room is smaller than 25 m2. Replace A3.
The product spreads an unpleasant odour.	Make sure the room has a relative humidity below 85%. Replace A3.
B8 illuminates after replacing A3.	Press and hold B9 for 3 seconds to reset.

Specifications

Product Air purifier
Article number AIPU200CWT
Dimensions (l x w x h) 355 x 205 x 530 mm
Applicable area < 25 m	^2
Clean air delivery rate 200 m	^3/h
Noise level 35 - 54 dB
Operating temperature -10 °C - 40 °C
Operating humidity < 95 % RH
Power supply 220 - 240 VAC ~ 50 / 60 Hz
Rated power 50 W
Standby power 0.5 W

Luftreiniger AIPU200CWT

• B⑩ for å velge 'AQ'.

Höld vinduene lukket mens produktet er slått på.

Angi automatisk modus