AIPU300CWT - Air purifier NEDIS - Free user manual and instructions

Product type	Air purifier
Brand	Nedis
Model	AIPU300CWT
Applicable area	Up to 45 m²
Clean Air Delivery Rate (CADR)	350 m³/h
Maximum noise level	< 54 dB
Dimensions (W x D x H)	285 x 285 x 550 mm
Power supply	220 – 240 V ~ 50/60 Hz
Rated power	40 W
Standby power consumption	< 0.5 W
Filter type	Replaceable air filter
Display	LED screen with air quality indicator
Operating modes	Auto, Sleep, Manual (fan speed)
Timer	2, 4, 8 hours
Air quality sensor	Yes (colors: red, yellow, green, blue)
Filter replacement indicator	Yes (reset by long press 3 seconds)
Operating temperature	-10 °C to 40 °C
Operating humidity	< 95% RH
Maintenance	Sensor cleaning, filter replacement
Safety device	Safety switch (auto shut-off if cover open)

Frequently Asked Questions - AIPU300CWT NEDIS

How to replace the filter of the AIPU300CWT air purifier?

To replace the filter, open the filter cover (A⑨), remove the old filter by pulling the tabs (A⑦), insert the new filter making sure the tabs face the safety switch (A⑧), then close the cover. The product stops automatically if the cover is not properly closed.

How to clean the air quality sensor?

The sensor (A⑤) can be cleaned by opening the sensor cover (A⑥) and gently wiping the lens with a dry cloth. Make sure the device is unplugged before cleaning.

Why does the purifier make a strange noise?

A strange noise may come from a poorly installed filter or a foreign object inside. Check that the filter (A⑩) is correctly placed and that no objects block the air inlets. If the noise persists, stop using the device and contact your dealer.

How to set the timer on the Nedis AIPU300CWT?

Press the timer button (B③) to select the desired duration: 2, 4, or 8 hours. The timer displays on the screen (B②). To cancel, restart the device.

How to use the automatic mode?

Press the auto mode button (B④). The sensor analyzes the air quality and automatically adjusts the fan speed. To exit this mode, press the sleep button (B⑦) or speed button (B⑧).

Is sleep mode silent?

Yes, sleep mode (B⑦) reduces the fan speed to minimum for the quietest operation. Exit this mode by pressing auto (B④) or speed (B⑧).

What do the colors of the air quality indicator mean?

The indicator (A②) displays real-time air quality: Red = poor, Yellow = moderate, Green = good, Blue = very good. The color changes about 30 seconds after startup.

How to reset the filter replacement indicator?

After replacing the filter, press and hold the filter indicator button (B⑤) for 3 seconds until the indicator turns off. This resets the counter.

Can the purifier run without a filter?

No, the Nedis AIPU300CWT air purifier is designed to work only with the filter installed. Additionally, the safety switch prevents operation if the filter cover is not properly closed.

What is the maximum room size covered by this device?

The Nedis AIPU300CWT air purifier is suitable for rooms up to 45 m². For optimal efficiency, ensure windows are closed and the device is placed at least 40 cm away from walls.

USER MANUAL AIPU300CWT NEDIS

3D rendering of a rectangular electronic device with a circular top and textured base (no visible text or symbols)

EN Quick start guide 4
DE Kurzanleitung 8
FR Guide de démarrage rapide 13
NL Snelstartgids 17
IT Guida rapida all'avvio 22
ES Guía de inicio rápido 26
PT Guia de iniciação rápida 31
SV Snabbstartsguide 35
FI Pika-aloitusopas 40
NO Hurtigguide 44
DA Vejledning til hurtig start 48
HU Gyors beüzemelési útmutató 53
PL Przewodnik Szybki start 57
EL Οδηγός γρήγορης εκκίνησης 62
SK Rýchly návod 66
CS Rychlý návod 71
RO Ghid rapid de inițiere

A

B

graph TD
    A["1"] --> B["2H 4H 8H"]
    B --> C["2"]
    B --> D["3"]
    B --> E["4"]
    B --> F["5"]
    B --> G["6"]
    B --> H["7"]
    B --> I["8"]
    B --> J["9"]
    B --> K["TIMER"]
    B --> L["AUTO"]
    B --> M["FILTER"]
    B --> N["DISPLAY"]
    B --> O["SLEEP"]
    B --> P["SPEED"]

Air purifier AIPU300CWT

For more information see the extended manual online: ned.is/aipu300cwt

Intended use

The Nedis AIPU300CWT is an air purifier with a display, an air quality indicator and changeable filters.

The product is intended to purify the air in a room.

The purifier can filter the air in a room up to 45m^2 .

Any modification of the product may have consequences for safety, warranty and proper functioning.

Specifications

Product Air purifier
Article number AIPU300CWT
Dimensions (l x w x h) 285 x 285 x 550 mm
Applicable area < 45 m	^2
Clean air delivery rate 350 m	^3 /h
Noise level < 54 dB
Operating temperature -10 °C - 40 °C
Operating humidity < 95 % RH
Power supply 220 – 240 V ~ 50/60 Hz
Rated power 40 W
Standby power < 0.5 W

Main parts (image A)

1 LED display

2 Air quality indicator

3 Air outlet

4 Air inlet

5 Sensor

6 Sensor cover

7 Pull tabs

8 safety trigger

9 Filter cover
10 Air filter

11 Power plug

Interface (image B)

1 On/off button
2 Timer indicator
3 Timer button
4 Auto mode button
5 Check filter indicator

6 Display on/off button
7 Sleep mode button
8 Fan speed button
9 Fan speed indicator

Safety instructions

WARNING

• Ensure you have fully read and understood the instructions in this document before you install or use the product. Keep the packaging and this document for future reference.
• Only use the product as described in this manual.
• Do not use a damaged product.
• Do not connect a bound cable to the power outlet.
• Only use the product indoors.
• Do not use the product in wet or damp environments.
• Do not place the product near gas, an electric burner or a heated oven.
• Do not cover ventilation openings.
• Do not insert any objects into the product.
• Do not place items on top of the product.
• Do not let the power cable touch hot surfaces.
• Do not use the power cable to carry the device.
• Do not unplug the product by pulling on the cable. Always grasp the plug and pull.
• This product may only be serviced by a qualified technician for maintenance to reduce the risk of electric shock.

Before first use

1. Open A⑨.
2. Take out A ^10 .

3. Remove the packaging and reinstall A ^10 .
   Make sure A⑦ is facing towards A⑧.

4. Close A ⑨.

A ^18 magnetically locks A ^9 .

When A⑧ is not connected properly, the product does not work.

1. Do not place the product within 40 cm of the wall to ensure proper operation.

2. Plug A ⑪ in a power outlet.

The product automatically shuts off when A⑨ is removed.

Using the product

1. Press B ① to switch on the product.

2. Press B ⑧ to increase / decrease the fan speed.

B(9) indicates the selected fan speed.

For optimal functioning run the product for 15 – 20 minutes at maximum speed.

1. Optionally, choose one of the following:

• B② to select 'timer'.

• B④ to select 'auto'.

• B⑦ to select 'sleep'.

Keep the windows closed while the product is switched on.

Air quality indicator

Colour Air quality
Red Bad
Yellow Moderate
Green Good
Blue Very good

A② shows the air quality using colours.

After 30 seconds, A② changes colour based on the current air quality.

Change the brightness of A② by pressing A② using the palm of your hand.

Set timer

1. Press B ③ to set the timer.

2. Press B ③ to increase / decrease the time.

B12 shows the selected time.

Time options: 2 hours, 4 hours, 8 hours.

1. To cancel the timer, restart the product.

Set auto mode

1. Press B ④ to select auto mode.

The sensor indicates the air quality and adjust the speed of the fan if necessary.

1. Press B ⑦ or B⑧ to exit this mode.

Set sleep mode

1. Press B ⑦ to select sleep mode.

In sleep mode, the product operates as quiet as possible.

1. Press B ④ or B ⑧ to exit this mode.

Memory function

• The product remembers the latest settings when switched off.
• The product resumes with these settings when switched back on.

Troubleshooting

Problem Solution
The product does not switch on. Connect to a power outlet.Check if the power cord is damaged.Make sure A8 is closed.
The product is making strange noises.	Make sure A10 is placed in the correct way.The air purifier may be damaged, or a foreign object may be inside. Stop using the air purifier and contact your Nedis dealer.Replace A10.
Poor purification quality. Do not block ventilation openingsand make sure that there is enough space around the product.Make sure A10 is placed in the right way.Make sure the room is smaller than 45 m2.Replace A10.
The product spreads an unpleasant odour.	Make sure the room has a relative humidity below 85%. (The average standard indoor humidity is 30 - 50%.) Replace A10.
A5 illuminates after replacing A10.	Press and hold B5 for 3 seconds to reset.

Kurzanleitung

Luftreiniger AIPU300CWT

Sing for at A⑦ vender forever A⑧.

1. Lukk A ⑨.

De Tweeling 28, 5215 MC 's-Hertogenbosch – The Netherlands 01/21