VE330 - Kettle CENTURION - Free user manual and instructions
Find the device manual for free VE330 CENTURION in PDF.
| Product Type | Electric Kettle |
| Brand | Centurion |
| Model | VE330 |
| Capacity | 1.7 L (max), 0.5 L (min) |
| Power | 1500 W (estimated) |
| Voltage | 220-240 V (check device) |
| Dimensions (approx.) | 22 cm (H) x 15 cm (W) x 25 cm (D) |
| Weight (approx.) | 1.2 kg |
| Material | Stainless steel heating element, plastic body |
| Color | Black (typical) |
| Auto Shut-Off | Yes, after boiling |
| Boil-Dry Protection | Yes, automatic switch-off |
| Lid Opening | Push-button release |
| Filter | Removable, washable |
| Power Base | Detachable, with cord storage |
| Cord Length (approx.) | 0.8 m |
| Water Level Indicator | Yes, internal marks |
| Safety Features | Boil-dry protection, overheat protection |
| Cleaning | Wipe exterior; descale with vinegar |
| Usage Instructions | Boil twice before first use |
| Warranty | Refer to manufacturer |
Frequently Asked Questions - VE330 CENTURION
User questions about VE330 CENTURION
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
Download the instructions for your Kettle in PDF format for free! Find your manual VE330 - CENTURION and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. VE330 by CENTURION.
USER MANUAL VE330 CENTURION
natural_image
Line drawing of a standard wireframe kettle with handle and lid (no text or symbols)MODELL: VE330
natural_image
Line drawing of a standard wireframe kettle with handle and lid (no text or symbols)MODEL: VE330
natural_image
Line drawing of a standard wireframe kettle with handle and lid (no text or symbols)MODELL: VE330
natural_image
Line drawing of a standard black kettle with handle and lid (no text or symbols)MALLI: VE330
natural_image
Line drawing of a standard wireframe kettle with handle and side panel (no text or symbols)MODEL: VE330
Read this booklet thoroughly before using and save it for future reference.
IMPORTANT SAFETY INSTRUCTIONS
- Read all instructions before using.
- Before connecting the kettle to the power supply, check that the voltage indicated on the appliance (underside the kettle & base) corresponds with the voltage in your home. If this is not the case, contact your dealer and do not use the kettle.
- The attached base can not be used for other than intended use.
- Do not operate the appliance without load to avoid damaging the heat elements.
- Unplug from the outlet when not in use.
- Do not let the cord hang over edge of table counter or touch hot surface.
- Do not place on or near a hot gas or electric burner or in a heated oven.
- Should you accidentally allow the kettle to operate without water, the boil-dry protection will automatically switch it off. If this should occur, allow the kettle to cool before filling with cold water and re-boiling.
- Ensure that kettle is used on a firm and flat surface where the children can't touch, this can prevent from overturning the kettle to damage the person or kettle.
- To protect against a fire, electric shock or personal injury, do not immerse cord, electric plugs or kettle in water or other liquids.
- Always take care to pour boiling water slowly and carefully without tipping the kettle too fast.
- Be careful when opening the lid for refilling when the kettle is hot.
- Close supervision is necessary when any appliance is used by or near children.
- Do not touch the hot surface. Use the handle or the button.
- Extreme caution must be used when moving an appliance containing hot water.
- The appliance is not a toy. Do not let the children play it.
- The use of attachments that are not recommended by the appliance manufacturer may result in fire, electric shock or personal injury.
- While boiling water, avoid to contact with steam from the spout when water is boiling or just after it has switched off. Do not be anxious to uncover the lid.
- Unplug from outlet when not in use and before cleaning; Allow it to cool before
putting on or taking off parts and before cleaning the appliance.
- Always ensure the lid is closed and do not lift it while the water is boiling. Scalding may occur if the lid is removed during the brewing cycles.
- If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or a similarly qualified person in order to avoid a hazard.
- Do not use the appliance for other than intended use.
- The kettle can only use with the stand provided.
- If the kettle is overfilled, boiling water may be ejected.
- Do not use the kettle outdoors.
- This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliances by a person responsible for their safety.
- Children should be supervised to ensure that they do not play with the appliance.
- This appliance is intended to be used in household and similar applications such as:
– staff kitchen areas in shops, offices and other working environments;
- farm houses;
– by clients in hotels, motels and other residential type environments;
- bed and breakfast type environments.
- Save these instructions.
Know your kettle

Before initial use
If you are using the kettle for the first time, it is recommended that you clean your kettle before use by boiling a full kettle of water twice and then discarding the water.
Operation
- To fill water into the kettle, remove it from the power base and open the lid by pressing the lid open button, fill with the desired amount of water to the kettle. Always fill the kettle between the minimum (0.5L) and maximum (1.7L) marks. Too little water will result in the kettle switching off before the water has boiled.
NOTE: Do not fill the water over the maximum level, as water may spill out of the spout when boiling. Ensure that the lid is firmly in place before
connecting the power cord to the outlet.
- Position the kettle on the power base.
- Connect the plug into a power outlet. Press the switch button below the handle. The indicating lights inside the kettle will light up. Then start to boil the water. The kettle will switch off automatically once the water has boiled and the light extinguishes. You can shut off the power by pressing the switch button at any moment during boiling water.
NOTE: Ensure that switch is clear of obstructions and the lid is firmly closed. The kettle will not turn off if the switch is constrained or if the lid is left open.
- Lift the kettle from the power base and then pour the water.
NOTE: Operate carefully when pouring the water from your kettle as boiling water may result in scald, besides, don't open the lid while the water in the kettle is hot.
- The kettle will not re-boil until the switch is uplifted. Allow to cool for 15\~20 seconds before reopening to boil water. The kettle may be stored on the power base when not in use.
NOTE: Ensure power supply is turned off when kettle is not in use. Boil-dry protect
Should you accidentally allow the kettle to operate without water, the boil-dry protection will automatically switch it off. If this should occur, allow the kettle to cool before filling with cold water and re-boiling.
Care and cleaning
Always disconnect the appliance from the power outlet before cleaning.
Never immerse the kettle or cord in water, or allow moisture to contact with these parts.
Removal of mineral deposits
Mineral deposits in tap water may cause the kettle interior to discolor. To remove this build-up, use Liquid Descaler, a simple to use non-toxic cleaner.
Alternatively:
- Fill the kettle with 3 cups of white vinegar and the remainder with water and be
allowed to stand overnight. Do not boil.
- Empty the solution from the kettle. Any stains remaining inside the spout can be removed by rubbing with a damp cloth, fill the kettle with clean water, bring to boil and then discard the water. Repeat and the kettle will then be ready to use.
The outside of the kettle can be wiped over with a damp cloth.
Cleaning appearance of housing
Wipe the appearance of housing with a wild and damp cloth or cleaner, never use a poisonous cleaner.
Cleaning the filter
Remember to clean the filter with a wild and damp cloth at intervals. The filter can be detached for easier cleaning simply by pulling it out. To attach, insert the filter into the support dent.
CAUTION: Do not use chemical, steel, wooden or abrasive cleaners to clean the outside of the kettle.
Storage
When not in use or storage, the power cord may be wound around the cord storage under the bottom of kettle.
Environment friendly disposal

You can help protect the environment!
Please remember to respect the local regulations:
hand in the non-working electrical equipments to an appropriate waste disposal center.