AWP2662 - Dehumidifier PHILIPS - Free user manual and instructions

Type of product	Dehumidifier
Model	AWP2662
Brand	Philips
Dimensions (L x W x H)	250 x 250 x 500 mm
Weight	10 kg
Power supply	220-240 V, 50 Hz
Power consumption	250 W
Noise level	42 dB
Dehumidification capacity	12 L/24h (at 30°C, 80% RH)
Tank capacity	2.5 L
Auto shut-off	Yes, when tank full
Continuous drainage option	Yes (with hose)
Adjustable humidity settings	Yes, 40-70% RH
Timer function	Yes, 1-8 hours
Air filter	Washable pre-filter
Filter cleaning frequency	Every 2 weeks
Safety features	Thermal fuse, automatic shut-off
Spare parts	Filter (model AWP2662-F1), drain hose
Operating temperature range	5°C to 35°C

Frequently Asked Questions - AWP2662 PHILIPS

How do I set the desired humidity level?

Press the 'Humidity' button repeatedly to cycle from 40% to 70% RH in 5% increments. The display shows the set value.

Why is the dehumidifier not collecting water?

Check if the room humidity is already low (below 40%). Ensure the air filter is clean and the fan is working. Also, verify that the tank is not blocked.

Can I use a hose for continuous drainage?

Yes, connect a standard garden hose (12 mm diameter) to the continuous drain outlet at the back. Remove the tank and direct the hose to a floor drain.

How often should I clean the filter?

Clean the washable pre-filter every 2 weeks. If used in dusty conditions, clean more frequently. A clogged filter reduces efficiency.

What does the 'Full Tank' indicator mean?

The tank is full or incorrectly placed. Empty the tank and reinsert it properly. The unit will restart automatically once the tank is correctly installed.

Is the dehumidifier noisy?

The noise level is around 42 dB, which is similar to a quiet conversation. It is designed for comfortable use in bedrooms and living rooms.

How can I improve the performance of my dehumidifier?

Place the unit in a central location away from walls and furniture. Close windows and doors. Keep the filter clean and ensure the room temperature is above 5°C.

What should I do if the dehumidifier freezes up?

The unit has an auto-defrost function. If ice forms, the compressor will pause until the evaporator reaches safe temperature. This is normal in very cold conditions.

Can the dehumidifier be left on 24/7?

Yes, it is designed for continuous operation. Use the timer to turn it off after a set period if desired. Ensure the tank is emptied regularly or use continuous drainage.

Where can I find replacement parts?

Replacement filters and hoses are available from Philips authorized service centres or online stores. Use the model number AWP2662-F1 for the filter.

USER MANUAL AWP2662 PHILIPS

Exterior view of a Philips thermosup bottle (no text or symbols visible on body)

· Do not overfill your bottle.
- Do not microwave.
- Keep the bottle out of reach of children when filled with hot beverages.
- The Daily insulated bottle can be filled with water of 0^ C to 50^ C. When filled with hot water, please be careful, in case it splashes out when you open the cap.

Use and cleaning instruction

1. Unscrew the lid and remove the straw, clean all the components with a mild detergent by hand or in the dishwasher (max 50^ C).
2. Please wash your bottle with mild detergent and rinse before use. To remove stubborn stains, use two teaspoons baking soda and warm water. Let stand for one hour before rinsing thoroughly.
3. When cleaning the product, do not use bleach, thinner, benzene, metal scrubber, abrasives or cleanser. The product may be damaged. Gently clean using a mild dishwashing detergent.
4. Stainless steel products are often left immersed in water for a long time, do not immerse the body in water for a long period of time. Water may enter through cracks and cause rust or poor insulation or cooling.
5. When cleaning, for clean use, wash it as soon as possible after use and do not boil it in boiling water as heat may cause

deformation of the product.

1. We recommend you pre-heat/pre-cool your bottle before use. Fill bottle with cold water and let stand for 5 minutes, then empty it and refill with your favorite drinks even with ice.

2. For your health, please consume perishable drinks like milk quickly and clean your bottle promptly. Do not add salty foods such as soups.

3. To prevent spills and leakage, make sure your lid is fastened properly.

4. To avoid sudden eruption of pressurized liquid, do not use your bottle for sodas or carbonated drinks. Do not use dry ice, soda or carbonated beverages in the bottle to avoid injury due to the sudden squirt of pressurized liquid.

5. For longer product life, please avoid violent impacts and drops, as they may damage the bottle.

Guarantee & Service

If you need information or if you have any problems, please visit the Philips website at www.philips.com or contact the consumer care center in your country. If there is no consumer care center in your country, go to a local dealer.

Specifications are subject to change without notice www.philips.com/water

© 2023 AquaShield

All rights reserved.

Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license.

This product has been manufactured by and is sold under the responsibility of Hong Kong AquaShield Health

Technology Company Limited and Hong Kong AquaShield Health Technology Company Limited is the warrantor

in relation to this product.

Rev A MAR 23

Thank you for being part of the solutions, and helping to reduce single-use plastic waste.

Philips Daily Insulated bottle is perfect for enjoying water when you are on-the-go.