DE3223 - Dehumidifier PHILIPS - Free user manual and instructions
Find the device manual for free DE3223 PHILIPS in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Type | Dehumidifier |
| Brand | Philips |
| Model | DE3223 |
| Color | White |
| Dimensions (W x D x H) | 25.5 x 25.5 x 51.0 cm |
| Weight | 9.2 kg |
| Power Consumption | 300 W |
| Voltage | 220-240 V |
| Frequency | 50 Hz |
| Moisture Removal (30°C, 80% RH) | 25 L/day |
| Water Tank Capacity | 4 L |
| Coverage Area | Up to 150 m² |
| Noise Level | 43 dB(A) |
| Operating Temperature Range | 5°C to 35°C |
| Filter Type | Washable mesh filter |
| Auto Defrost | Yes |
| Continuous Drain Option | Yes (hose not included) |
| Auto Restart After Power Failure | Yes |
| Child Lock | Yes |
| Castors | Yes (4 castors) |
| Cleaning Frequency | Clean filter every 2 weeks |
Frequently Asked Questions - DE3223 PHILIPS
How often should I clean the filter?
It is recommended to clean the filter every 2 weeks to maintain optimal performance. A dirty filter can reduce airflow and efficiency.
How do I set the desired humidity level?
Press the 'Humidity Set' button to cycle through levels from 40% to 80% in 5% increments. The recommended level for comfort is 50-60%.
Can I use the continuous drain function?
Yes, connect a standard garden hose (13 mm diameter) to the continuous drain outlet at the back of the unit. Ensure the hose runs downward to allow gravity drainage.
What does the 'Full Tank' indicator mean?
The indicator lights up when the water tank is full. The unit will automatically stop dehumidifying until the tank is emptied and replaced properly.
How do I enable Child Lock?
Press and hold the Child Lock button for 3 seconds to lock all buttons. Repeat to unlock. This prevents accidental changes.
What is the operating temperature range?
The dehumidifier operates in temperatures between 5°C and 35°C. Below 5°C, the unit may not function efficiently and could frost.
How do I reset the filter cleaning reminder?
After cleaning the filter, press and hold the Filter Reset button for 3 seconds until the indicator turns off.
Why is the dehumidifier not collecting water?
Check if the room humidity is already low (below set level), the filter is clogged, or the room temperature is below 5°C. Also ensure the unit is properly leveled.
What does error code 'E1' mean?
Error code E1 indicates a humidity sensor failure. Unplug the unit, wait 5 minutes, then restart. If persistent, contact Philips support.
How do I clean the water tank?
Remove the tank and wash it with mild soap and water. Rinse thoroughly and dry before reinserting. Do not use abrasive cleaners.
User questions about DE3223 PHILIPS
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Dehumidifier in PDF format for free! Find your manual DE3223 - PHILIPS and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DE3223 by PHILIPS.
USER MANUAL DE3223 PHILIPS
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : PHILIPS
Model : DE3223
Category : Dehumidifier