BTE-J20ANC - Headphones AKAI - Free user manual and instructions

Product Type	True Wireless Stereo (TWS) Earbuds with Active Noise Cancellation
Model	BTE-J20ANC
Brand	AKAI
Bluetooth Version	V5.3
Bluetooth Frequency	2.4-2.485 GHz
Audio Codec Support	SBC, AAC
Active Noise Cancellation (ANC)	25-28 dB reduction
Driver Unit Size	13 mm
Microphone Sensitivity	-42±3 dB
Frequency Response	20 Hz - 20,000 Hz
Earbud Battery Capacity	Lithium 40 mAh, 3.7V
Charging Case Battery Capacity	Lithium 300 mAh, 3.7V
Playback Time (Earbuds)	Approx. 4 hours
Standby Time (Earbuds)	240 hours
Earbud Charging Time	Approx. 1.5 hours
Case Charging Time	Approx. 1.5 hours
Charging Input	5V, 500mA via USB Type-C
Wireless Range	10 meters (open space)
Bluetooth Profiles	HFP, A2DP, AVRCP, AVDTP, GAP, SDP
Supported Systems	iOS & Android
Weight (total)	37 g
Charging Case Dimensions	74 x 38 x 28 mm
Package Contents	Earbuds, Charging Case, USB Type-C Cable, User Manual
Care & Cleaning	Wipe with dry cloth; do not use harsh chemicals.
Safety	Keep dry, avoid heat, do not disassemble, charge max 10h.

Frequently Asked Questions - BTE-J20ANC AKAI

How do I pair the earbuds for the first time?

Remove both earbuds from the charging case. They will power on and pair with each other automatically. When one LED stops flashing and the other continues, go to your device's Bluetooth settings and select BTE-J20ANC.

How do I turn the earbuds on/off?

The earbuds turn on automatically when removed from the charging case. They turn off and begin charging when placed back inside the case.

What is the battery life of the earbuds?

The earbuds provide approximately 4 hours of playback time on a full charge. The charging case can recharge them multiple times.

How long does it take to charge the earbuds and case?

Both the earbuds and the charging case take approximately 1.5 hours to fully charge using the included USB Type-C cable.

How do I activate Active Noise Cancellation (ANC)?

Long press the multi-function button on either earbud. You will hear a voice prompt saying 'ANC ON' or 'ANC OFF'.

Can I use just one earbud?

Yes, you can use a single earbud. Remove only one from the case, it will power on. Pair it as 'BTE-J20ANC' in your device's Bluetooth settings.

How do I control music playback?

Quick press to pause/resume. Triple press the right earbud for next track, triple press the left for previous track. Double press right for volume up, double press left for volume down.

How do I answer or reject calls?

Quick press either earbud to answer or end a call. Press and hold for a few seconds to reject an incoming call.

How should I clean and maintain the earbuds?

Wipe the earbuds and case with a soft, dry cloth. Do not use harsh chemicals or abrasive materials. Avoid moisture and high temperatures.

What should I do if the earbuds don't pair or connect?

Ensure the earbuds are charged. Reset by placing them in the case, close the lid for 10 seconds, then remove and try pairing again. Also, forget the device from Bluetooth settings and re-pair.

USER MANUAL BTE-J20ANC AKAI

Black wireless earbuds with open case, no visible text or symbols on the device body

EN-ENGLISH

TECHNICAL SPECIFICATIONS

Model number	BTE-J20ANC
Chipset	Bluetrum AB5636E
Bluetooth Version	Bluetooth V5.3
Bluetooth Frequency	2.4-2.485GHz
Audio decoding	SBC/AAC
Profiles supported	HFP A2DP AVRCP AVDTP GAP SDP
Active Cancellation	25-28dB
Weight	37g
Base Unit Dimensions	74x38x28mm
Speaker Unit size	13mm
Charging Input	5V 500mA
Microphone Sensitivity	-42±3dB
Frequency Response	20Hz-20000Hz
Built in Battery type (Earbuds)	Lithium 40 mAh 3.7V
Built in Battery type(Base Unit)	Lithium 300mAh 3.7V
Standby Time(Earbuds)	240 Hours
Playing Time(Earbuds)	4.0 hours (Approx.)
Charging Time (Earbuds)	1.5 Hours (Approx.)
Charging Time (Charging case)	1.5 Hour (Approx.)
Bluetooth Range	10 meters (open space with no obstacle)
Bluetooth Transmission power	≤ 10 dBm
Supported system	iOS & Android

SAFETY INFORMATION

Important safety instructions - read carefully before use. It is important that this user manual should be retained with the appliance for future reference. These warnings have been provided in the interest of safety. You must read them carefully before installation or use.

WARNINGS

1. Keep the product dry. Do not store it in damp areas.
2. Do not expose the product to the sun or high temperature.
3. Do not attempt to open the product, especially operated by non-professional person.
4. Do not make the product fall down, shake the product violently, or strike the product with hard objects.
5. Do not use harsh chemicals or cleaner to clean the headset.
6. Do not use something sharp to scratch the surface of the product.
7. Do not continuously charge the headset for over 10 hours to avoid affecting the service life.

PACKAGE CONTENT

USER MANUAL

EARPHONES

TYPE-C CHARGING CABLE

OPERATION METHOD

Before first use

Please charge fully the earphones before first use by ensuring they are properly inserted into the case and then charging the case using the TYPE-C cable provided.

Power on

Remove Earphones from their case.

They will automatically switch on and you will hear a message "Power on".

The lights on the Earphones will flash blue/red until paired.

Power off

Insert the Earphones into the charging case and they will automatically switch off and enter charging mode.

Pairing the Earphones

You can connect as one single Earphone, or together as a pair.

ON FIRST USE

Pairing one earphone

Remove just one earphone from the charging case. The single earphone will power on automatically. A LED light will flash Red&Blue alternately. On your device, go to the Bluetooth settings and select "BTE-J20ANC".

Pairing both earphones

Remove both earphones from the charging case. They will power on and begin to pair with each other automatically.

When the LED light on one earphone stops flashing, and the LED light on the other earphone is still flashing, it means both earphones are paired to each other.

On your device, go to the Bluetooth settings and select "BTE-J20ANC".

Charging

When the earphones battery is low, a notification sound will play to alert the low battery status.

A flashing red LED will also notify the low battery level.

To charge, place the earphones inside the charging case.

The LED indicator will advise the charging process.

To charge the Charging case, connect the TYPE-C charging cable to the port on the back of the charging case.

Phone Calls

Answer call: Quick press of either multi-function button.

End call: Quick press of either multi-function button.

Reject call: Press and hold either multi-function button for a couple of seconds.

Music Control

Pause/Resume music playback: Quick press of either multi-function button.

Next song: Tap the multi-function button on the RIGHT earphone 3 times.

Previous song: Tap the multi-function button on the LEFT earphone 3 times.

Volume up: Double tap the multi-function button the RIGHT earphone.

Volume down: Double tap the multi-function button the LEFT earphone.

ANC ON/OFF: Long press of either multifunction button and you will hear a message "ANC ON" or "ANC OFF".

DISPOSAL OF ELECTRICAL AND ELECTRONIC EQUIPMENT

This symbol on the product or packaging means that the product should not be treated as household waste. Do not throw garbage at the end of its life, but take it to a collection center for recycling. in this way you will help to protect the environment and be able to prevent any negative consequences that it would have on the environment and human

health.

To find your nearest collection center:

• Contact local authorities
• Access the website: www.mmediu.ro
• Request additional information from the store where you purchased the product.

IMPORTER: SC INTERVISION TRADING-RO SRL

I.C Bratianu Boulevard 48-52 no, Building A, 5 ^th floor,

504-505 room, Pitesti City, Arges County, Romania

Post code: 110121

AKAI

MANUAL DE UTILIZARE

CĂȘTI FĂRĂ FIR CU ANULARE ACTIVĂ A ZGOMOTULUI

MODEL: BTE-J20ANC

Black wireless earbuds with open case, no visible text or symbols on device body

RO-ROMÂNĂ

SPECIFICATII TEHNICE

Black wireless earbuds with open case, no visible text or symbols on device body

ΕΛ - ΕΛΛΗΝΙΚΑ

TEXNIKA XAPAKTHPIΣTIKA

Black wireless earbuds with open case, no visible text or symbols on device body

BG-БЪЛГАРА

Black wireless earbuds with open case, no visible text or symbols on device body

HU-MAGYAR

MÜSZAKI ELŐÍRÁSOK

Black wireless earbuds with open case, no visible text or symbols on device body

PL-POLSKI

DANE TECHNICZNE

Black wireless earbuds with open case, no visible text or symbols on device body

CZ-ČESKY

TECHNICKÉ UDAJE

Black wireless earbuds with open case, no visible text or symbols on device body

SK-SLOVENSKY

TECHNICKÉ ÚDAJE