WatchY4 Plus - Uncategorized Lamax - Free user manual and instructions

Product Type	Smartwatch
Model	WatchY4 Plus
Brand	Lamax
Dimensions (Case)	45 x 38 x 10 mm
Weight	40 g
Display	1.3-inch TFT LCD
Battery Capacity	200 mAh
Charging Time	2 hours
Battery Life	7 days typical use
Water Resistance	IP68 (up to 1.5 m for 30 min)
Compatibility	iOS 9.0+ / Android 4.4+
Bluetooth	Bluetooth 5.0
Sensors	Accelerometer, Heart Rate, SpO2
Main Functions	Step counter, Heart rate monitor, Sleep tracking, SpO2, Call & message notifications, Music control, Sedentary reminder, Stopwatch
Strap Material	Silicone
Strap Size	22 mm (replaceable)
Care & Cleaning	Wipe with a soft, dry cloth. Avoid harsh chemicals.
Safety	Remove the watch if skin irritation occurs. Keep away from extreme heat.
Spare Parts & Repairability	Strap replaceable. Battery not user-replaceable. Contact support for repairs.
General Information	Smartwatch for fitness and everyday use. Features a full touch screen and dedicated app.

Frequently Asked Questions - WatchY4 Plus Lamax

How do I pair the WatchY4 Plus with my phone?

Download the Lamax Fit app from the App Store or Google Play. Enable Bluetooth on your phone, open the app, and follow the on-screen instructions to pair your watch.

Is the WatchY4 Plus waterproof?

Yes, it has an IP68 rating, meaning it can withstand immersion in water up to 1.5 meters for up to 30 minutes. However, avoid hot water and saltwater.

How do I charge the watch?

Use the included magnetic charging cable. Attach the cable to the contacts on the back of the watch and plug the USB end into a power source.

Can I answer calls with the WatchY4 Plus?

The watch supports call notifications and can reject incoming calls, but you cannot answer calls directly from the watch.

Does the WatchY4 Plus track sleep?

Yes, it automatically tracks your sleep duration and sleep stages (light, deep, awake) when worn to bed. Data is synced to the app.

How do I change the watch face?

Press and hold the watch face to enter the watch face selection menu, or change it via the Lamax Fit app under Watch Face settings.

What is the battery life of the WatchY4 Plus?

With typical use, the battery lasts about 7 days. Heavy use (e.g., continuous heart rate monitoring) may reduce battery life.

Can I use the watch without a phone?

The watch can function as a standalone step counter and sleep tracker, but full features (notifications, GPS syncing) require a Bluetooth connection to your smartphone.

How do I reset the WatchY4 Plus?

To factory reset, go to Settings > System > Reset on the watch, or use the app to disconnect and delete the device.

What should I do if the watch stops working?

First, try charging it fully. If it doesn't turn on, perform a hard reset by pressing and holding the side button for 10 seconds. If the issue persists, contact Lamax support.

USER MANUAL WatchY4 Plus Lamax

Operating Instructions

Charging the watch

Charge the watch before first use. Plug the end of the supplied power cable into a USB charger or a USB port on your computer, and attach the other end to the pins on the charging pads on the bottom of the watch. The pins attach to the watch using magnets. After connecting the charger, information about the charging status will be displayed on the watch display. The battery will be fully charged in approximately 2.5 hours.

Description of the watch

1. Loudspeaker

2. Nano SIM card slot

3. Came

4. Dial

5. Dlar

6. Microphone

7. SOS button / on / off button

8. Ventilation hole

9. Charging connector

Note: Do not insert any sharp objects (eg the tip of a SIM card ejector) into the ventilation holes or the microphone.

4) Turn on the device

1) Turn on the device To turn on the device, hold down the SOS button for at least 3 seconds. If the

device cannot be turned on, let it charge.

2) Turn off the device

You can turn off LAMAX WatchY4 Plus in 2 ways:

1. Enter the More menu and select Settings. Here, click on "Power off" and the

watch will turn off. This method only works when in the application.

1. Turn off the watch remotely in the phone app.

3) SOS call

Press the SOS button for 3 seconds to make an SOS call to the set SOS con-

tact number. You set this in the LAMAX CONNECT application (more below

in the instructions).

4) Turn on / off the screen

Short press the SOS button and the screen will turn off when it was on; or turns on when it was off.

turns on when it was

Commissioning the WatchY4 Plus device

Inserting a SIM card The SIM card is not in

The SIM card is not included in the package. A hand SIM card is inserted into

the watch. The SIM card slot is located on the left side of the watch. Remove the silicone

The SIM card slot is located on the left side of the watch. Remove the silicone cover of the watch. Use the tool to slide out the SIM card slot.

Insert the SIM card (the chip should be facing up). Insert the slot into the

watch.

Turning on

Turn on the device by holding the SOS button for at least 3 seconds. The devi-

ce will show the loading logo on the display and start up. If no signal strength is displayed after approximately 5 minutes, protect the device

is displayed after approximately 5 minutes, restart the device. If the signal strength is displayed, continue with the following point installing

in the signal strength is displayed, continue with the following point installing the LAMAX CONNECT application and registration.

IMPORTANT WARNING

- If you want to deactivate the SIM card PIN, you can do so after inserting it

into your mobile phone.

- The SIM card used must have an activated data plan.

- If you are not sure, you can check the functionality of the data plan on your mobile phone.

- To receive calls on the device, it is necessary to set contacts in the LAMAX

To receive calls on the device, it is necessary to set contacts in the Brazil CONNECT mobile application.

- Do not open, repair or disassemble the device yourself other than as

described in this manual. In case of unauthorized handling of the device, the

warranty will be lost.

Installation of the LAMAX CONNECT application and registration

1) Installation of the LAMAX CONNECT application

The LAMAX CONNECT mobile application is required for full use of all device functions. Plan installation and installation shall be found for Android

functions. Please install it on your phone. It is available for free for Android (5.0x) and iOS (4.2x) at the light below as just search for the application in

(5.0+) and IOS (12+) at the link "Below or just search for the application in Google Play or AppStore

* If you open the link on your mobile device, you will be automatically directed

to the relevant store.

QR code for easy app download:

https://go.elem6.com/lamax-connect

2) User registration

Fill in your email and password. Click „Send verification code“. A timer will

appear showing the amount of time you can resend the code. Check your

e-mail box, including the SPAM folder, and write down the verification code.

3) Device registration

To add a device, select the „More“ menu in the app and click on the „+” icon in the top-right. Add watch in the watch, swing right and select the “+” icon

In the top right - Add watch. In the watch, swipe right and select the "Pair watch" menu. Here you will see a OR code to scan. If you are unable to scan watch? friends. Here you will see a qtr code to scan. If you are unable to scan with your phone's camera, enter the pairing number manually. Then enter the

name of the contact (yours) and the name of the watch user.

4) Touch screen

LAMAX WatchY4 Plus is controlled by gestures on the touch screen.

Touch gestures are used to select and open menu items. Menu items are

selected by dragging your finger left, right or up and down on the display.

Opening an item is done by tapping your finger on the display. Swine right to show Phone/Chat/Viden call/Add friend/Pair/P

Camera.

Swipe left to show Alarm Clock/Gallery/Messages/Language/Settings.

Swipe from top to bottom to enter the message view.

Function

Phone

Enter the Phone menu and select a phone contact. If the number cannot be

dialed, check if it is added in the application.

Chat

Enter the Chat menu. Press and hold the HOLD button to record a message.

Release the button to send the message. Click on unread messages to play

them.

Video call

Enter the Video Call menu and select a phone contact to make a video call. During a long call, the watch may heat up. Do not view the watch if it is too

During a long call, the watch may heat up. Do not wear the watch if it is too hot. Wait for them to cool down.

The length of the video call is limited to 5 minutes.

Camera

Camera Enter the Camera menu to take pictures. You will see the photos in the gallery.

Enter the camera menu to take pictures. You will see the photos in the gallery, where you will be able to manage them.

Add a friend

Enter the Add Friend menu. After inserting the SIM card in this menu, click

once to add and search and add a friend's contact.

The watches must be within 8 meters of each other for successful pairing.

Pedometer

Enter the Pedometer menu and the number of steps you have taken that day

will be displa

Localization

Turn on the app, click on Location to check the GPS route and location.

Interchangeable dial covers and straps

The dial covers of the watch case and strap can be changed.

- Carefully remove the cover from the dial of the watch case and replace

the new cover. Make sure the hole for the control button is aligned with the

control button and the cover is tight.

- Release the lever in the watch case logs to remove the strap. Insert one pin of the dowel into the hole in the lugs of the watch case.

pin of the down into the hole in the rings of the watch case. Using a suitable tool, press the second pin of the post and insert it into the

opposite hole in the handle. Loosen the pin to fit into the hole

Water and dust resistance

The watch is resistant to the ingress of water according to the degree of pro-

tection IP67. This means that they can come into short contact with water (short splashes, perspiration, light rain or snow). However, they are not suitable for swimming or diving.

table for swimming or diving.

Warning: Never charge a wet watch. The device is not intended for use during water sports, swimming, diving or showering. It must not be exposed to pre-surveyed

ter sports, swimming, diving or showering. It must not be exposed to pressurized water or strong water jets, such as rapid immersion or diving.

Box contents

- Watch

- Watch 2: Single

- 3× Single color strap and cover - Magnetic charging cable

- Manual

- Tool to elect the nano SIM card slot

Technical specifications

Technical specifications

Display 1.7" TFT display

Resolution 240 × 280 Memory 12B MB (ROM) / 12B MB (RAM)

Camera 2 MP Watch body weight 52 g

Watch body weight 52 g Watch body dimensions 51.2 x 42.8 x 15.5 mm Charging USB 5 V / 0.5–1 A

Battery 680 mAh Lithium-Polymer (approx. 3 days of

Bacteria normal use)

Water resistance IP67

Compatibility Mobile devices with iOS 12+ and Android 5.0+

The most current version of the manual can be found under this link:

https://www.lamax-electronics.com/en/downloads/

LAMAX WatchY4 Plus

Bedienungsanleitung

Uhr aufladen

Laden USB S V / 0.5–1 A

6) When / you know again

(1) Honocally to the following: