RGA-24S-OG - Uncategorized ENTES - Free user manual and instructions
Find the device manual for free RGA-24S-OG ENTES in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Reactive Power Controller |
| Model | RGA-24S-OG |
| Brand | ENTES |
| Dimensions (H x W x D) | 96 x 96 x 85 mm (panel cutout 92x92 mm) |
| Weight | Approx. 0.5 kg |
| Power Supply | 100-240 V AC, 50/60 Hz |
| Power Consumption | < 5 VA |
| Number of Steps | Up to 24 (RGA-24S) |
| Measurement Input | 3-phase voltage and current via external CT |
| Functions | Automatic power factor correction, harmonic monitoring, alarm output, data logging |
| Display | Backlit LCD with status icons and numeric values |
| Communication | RS-485 Modbus optional |
| Operating Temperature | -10°C to +55°C |
| Storage Temperature | -20°C to +70°C |
| Humidity | Max 95% non-condensing |
| Protection Rating | Front IP54 (panel sealed) |
| Mounting | Panel mount with brackets |
| Maintenance | No user-serviceable parts; clean front with dry cloth |
| Safety | Complies with IEC 61010-1, double insulation |
| Spare Parts | Contact ENTES or authorized distributor for replacement |
| Reparability | Only qualified personnel; no user repair possible |
Frequently Asked Questions - RGA-24S-OG ENTES
How do I install the RGA-24S-OG controller?
Install the device in a panel cutout of 92x92 mm. Connect the power supply (100-240 V AC) and voltage/current inputs according to the wiring diagram provided in the manual. Ensure the external current transformer (CT) is installed correctly on the main conductors.
What is the maximum number of capacitor steps this controller can handle?
The RGA-24S-OG supports up to 24 steps. Step outputs are configured via the settings menu.
How do I set the target power factor?
Access the 'Set' menu, select 'Target PF', and adjust using the arrow keys. Typical target is between 0.95 and 1.00 (inductive). Confirm with the 'Enter' button.
The display shows 'ALARM' - what does it mean?
Possible alarms include overvoltage, undervoltage, overcurrent, or target PF not reached. Check the alarm code in the 'Info' menu. Common solutions: verify supply voltage, CT connections, or capacitor health.
Can I use this controller with single-phase systems?
No, the RGA-24S-OG is designed for three-phase systems. For single-phase applications, a different model is required.
How do I reset the device to factory settings?
Enter the 'Setup' menu, scroll to 'Factory Reset', and confirm. All user settings will be erased. Default settings will be restored.
What communication protocols are supported?
The controller has an optional RS-485 port using Modbus RTU. Parameters can be read/written via a supervisory system.
Why is the power factor not improving?
Check if capacitors are connected correctly and functional. Verify CT polarity and ratio settings. Ensure the target PF is set correctly and the system is not under or over compensated.
How often should I clean the device?
Clean the front panel with a soft, dry cloth when needed. Do not use liquids or abrasive cleaners. Internal cleaning is not required.
Where can I find the user manual?
The user manual is available for free download at notice-facile.com or the ENTES official website. Use the search function with model 'RGA-24S-OG'.
User questions about RGA-24S-OG ENTES
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual RGA-24S-OG - ENTES and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. RGA-24S-OG by ENTES.