Kluge KOI9213BLGH - Range hood

KOI9213BLGH - Range hood Kluge - Free user manual and instructions

Find the device manual for free KOI9213BLGH Kluge in PDF.

📄 24 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice Kluge KOI9213BLGH - page 1
Pick your language and provide your email: we'll send you a specifically translated version.
Product TypeRange Hood
BrandKluge
ModelKOI9213BLGH
Installation TypeWall-Mounted / Chimney
MaterialStainless Steel
Dimensions (W x D x H)90 cm x 50 cm x 60-110 cm (adjustable chimney)
Net WeightApprox. 15 kg
Power Supply220-240 V ~ 50 Hz
Motor Power220 W
Total Power Consumption230 W (including lights)
Max Airflow650 m³/h
Number of Speeds3 + Intensive
Noise Level (max)65 dB(A)
Lighting2 x 1.5 W LED
Filter TypeAluminum Grease Filter (washable)
ControlsSlider / Push Button
Ducted / RecirculatingDucted (optional recirculation kit)
Energy ClassA+
Warranty2 Years
CleaningGrease filter washable in dishwasher; surface clean with damp cloth
Safety FeaturesAutomatic shut-off timer, Thermal overload protection
Included AccessoriesGrease filter, chimney sections, mounting template, user manual

Frequently Asked Questions - KOI9213BLGH Kluge

How do I install the KOI9213BLGH range hood?
Installation must be done by a qualified professional. Ensure the hood is mounted at least 65 cm above electric cooktops or 75 cm above gas cooktops. Follow the included template and secure the chimney properly. The hood must be connected to a ventilation duct or recirculation kit.
How often should I clean the grease filter?
Clean the aluminum grease filter every month under normal use. It is dishwasher safe or can be hand washed with warm soapy water. Let it dry completely before reinstalling.
Can the hood be used in recirculation mode?
Yes, the KOI9213BLGH can be used in recirculation mode with an optional charcoal filter (purchased separately). This mode recirculates filtered air back into the kitchen.
Why is my range hood noisy?
Noise can be due to dirty filters, loose ductwork, or improper installation. Clean the grease filter first. If noise persists, check that all screws are tight and the duct is securely connected. Normal noise level is 45-65 dB depending on speed.
How do I replace the LED lights?
The LED lights are integrated and should be replaced only by a qualified technician. If they fail, contact Kluge support for service.
What is the maximum airflow of this hood?
The maximum airflow is 650 m³/h. This is sufficient for medium to large kitchens.
Does the hood come with a remote control?
No, the hood is controlled via slider or push buttons on the front panel.
How do I clean the exterior surface?
For the stainless steel surface, use a soft damp cloth with mild detergent. Avoid abrasive cleaners or scouring pads. Dry with a clean cloth to prevent water spots.
What should I do if the hood stops working?
First, check the power supply and circuit breaker. If the thermal overload protection tripped, wait 15 minutes and reset. If still not working, contact Kluge customer service.
Is the warranty valid if I install it myself?
Warranty may be voided if installation is not done by a qualified professional. Always have a certified installer mount the hood to ensure full warranty coverage.

User questions about KOI9213BLGH Kluge

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Range hood in PDF format for free! Find your manual KOI9213BLGH - Kluge and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. KOI9213BLGH by Kluge.

USER MANUAL KOI9213BLGH Kluge

natural_image Exterior view of a modern kitchen ventilation unit with a tall chimney and ventilation duct (no text or symbols visible)

KOI9213BLGH

Milí uživatelé!

255 221 320 260 min. 805 - max 1005 475 40 600 900 3

4

ELEKTRICKY 550 PLYNOVÝ 650 5

4 x Ø 8 6

Ø 16 cm 8

220-240V ~50-60Hz X - 2 cm Y - 2 cm 9

Technical diagram showing a mechanical assembly with an elevator shaft and a control panel, labeled with number 10.

Diagram illustrating a mechanical assembly process with labeled components and directional arrows, including a 3D box and a 11-pin appliance.

Technical diagram showing a mechanical assembly with a coiled spring and a control panel, labeled with component number 12.

natural_image Diagram of a mechanical setup with a box, tower, and control panel (no text or symbols)

Diagram illustrating a hand using a screwdriver to adjust or install a device, with an inset showing a switch and magnified view of the component.

Kluge KOI9213BLGH - Milí uživatelé! - 11

natural_image Technical line drawing of a mechanical assembly with a box, fan, and potentiometer (no text or symbols)

Technical diagram showing a mechanical assembly with labeled components and a numbered reference marker '16'

Kluge KOI9213BLGH - Milí uživatelé! - 13

natural_image Technical illustration of a mechanical assembly with a cylindrical component and a control panel (no text or symbols)

18

kluge®

Table of contents Click a title to access it
Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : Kluge

Model : KOI9213BLGH

Category : Range hood