SOI 1102TQ - Uncategorized SENCOR - Free user manual and instructions

Product Type	Steam Iron
Brand	Sencor
Model	SOI 1102TQ
Power Consumption	2400 W
Water Tank Capacity	350 ml
Soleplate Material	Ceramic
Steam Output	Up to 50 g/min
Shot of Steam	Up to 150 g/min
Vertical Steam	Yes
Spray Function	Yes
Self-Cleaning	Yes
Anti-Calc	Yes
Auto Shut-Off	Yes
Cord Length	2.0 m
Weight	1.45 kg
Dimensions (W x D x H)	30.0 x 15.0 x 18.2 cm
Voltage	220-240 V, 50/60 Hz
Safety Features	Thermal fuse, tip-over protection
Repairability	Spare parts available; user-replaceable soleplate
Maintenance	Descale regularly; clean soleplate with damp cloth

Frequently Asked Questions - SOI 1102TQ SENCOR

What type of water should I use in the Sencor SOI 1102TQ iron?

Use distilled or demineralized water to prevent scale buildup. Tap water may be used if it is not hard, but regular descaling is recommended.

How do I descale the iron?

Fill the tank with a mixture of one part vinegar to three parts water, set the iron to steam mode, and let it steam for a few minutes. Then empty the tank and rinse with clean water. Repeat if necessary.

What does the self-cleaning function do?

The self-cleaning function helps remove scale and impurities from the steam chamber. Activate it by pressing the self-clean button (if available) while the iron is hot and empty.

How can I clean the soleplate?

Allow the iron to cool completely. Use a damp cloth or a non-abrasive cleaner. Do not use scouring pads or harsh chemicals that could damage the ceramic coating.

The iron does not produce steam. What should I check?

Ensure the water tank is filled, the temperature dial is set to a steam zone (above 2 dots), and the steam control is open. Check if the self-clean or anti-calc valves are clogged.

What is the anti-drip function?

The anti-drip function prevents water from leaking out of the soleplate when the iron is not hot enough to produce steam. It automatically stops dripping.

Can I use the iron vertically for steaming curtains?

Yes, the Sencor SOI 1102TQ has a vertical steam function. Hold the iron upright and press the steam burst button to remove wrinkles from hanging fabrics.

How long does the iron take to heat up?

The iron heats up to the selected temperature in approximately 1-2 minutes. The indicator light will turn off when the set temperature is reached.

What does the auto shut-off feature do?

The auto shut-off turns off the iron automatically if left unattended for a period (e.g., 30 seconds when horizontal, 8 minutes when vertical) to prevent accidents.

Where can I get spare parts or repairs for my Sencor SOI 1102TQ?

Contact Sencor customer service or an authorized service center. Spare parts such as soleplates, buttons, or cords may be available through their website or local retailers.

USER MANUAL SOI 1102TQ SENCOR

Line drawing of a medical or laboratory device with a pointed tip and flared base, labeled with number 2 (no text or symbols on the device itself)

Simple line drawing of a hairdryer with a bulb and cap (no text or symbols)

CZ

Ústní sprcha

Návod k použití