SST 13D - Uncategorized SENCOR - Free user manual and instructions

Product Type	Steam Iron
Model	SST 13D
Brand	Sencor
Power	2000 W
Water Tank Capacity	300 ml
Soleplate Material	Stainless Steel / Ceramic Coated
Steam Output (continuous)	30 g/min
Steam Boost	Yes, up to 120 g/min
Vertical Steaming	Yes
Spray Function	Yes
Anti-Drip System	Yes
Self-Cleaning Function	Yes
Auto Shut-Off	Yes
Swivel Cord	Yes, 360°
Dry Ironing	Yes
Variable Temperature Control	Yes
Dimensions (L x W x H)	28 x 12 x 15 cm
Weight	1.2 kg
Power Cord Length	2.0 m
Water Level Indicator	Yes

Frequently Asked Questions - SST 13D SENCOR

How do I descale my Sencor SST 13D steam iron?

To descale, fill the water tank with a mixture of half white vinegar and half water. Set the iron to the highest temperature and let it steam for a few minutes. Allow it to cool, then empty and rinse with clean water.

What should I do if the iron is not producing steam?

Ensure the water tank is filled and the temperature is set at or above the steam setting. Check if the anti-drip system is activated. If still no steam, try cleaning the soleplate and steam vents with a damp cloth.

Can I use tap water in the iron?

It is recommended to use distilled or demineralized water to prevent mineral buildup. Tap water can be used but may cause scaling over time.

How do I clean the soleplate?

Unplug the iron and let it cool. Wipe the soleplate with a damp cloth. For stubborn residue, use a non-abrasive cleaner or a mixture of baking soda and water.

What does the anti-drip system do?

The anti-drip system prevents water from leaking out of the soleplate when the iron is not hot enough to produce steam. It activates automatically.

How does the auto shut-off work?

The iron automatically shuts off after 30 seconds of inactivity when upright, or after 8 minutes when on its soleplate or side. This is a safety feature to prevent accidents.

Can I use the iron vertically for hanging clothes?

Yes, the SST 13D supports vertical steaming. Hold the iron upright and press the steam boost button to steam hanging garments.

What is the maximum steam output?

The continuous steam output is about 30 g/min, and the steam boost can reach up to 120 g/min for tackling tough wrinkles.

How long does the iron take to heat up?

The iron typically heats up within 30-45 seconds, depending on the selected temperature setting.

What should I do if the iron leaves marks on clothes?

Marks may be due to residue on the soleplate or using too high a temperature. Clean the soleplate as instructed and select the appropriate temperature for the fabric.

USER MANUAL SST 13D SENCOR

The digital timer is used to switch the AC 230V power supply on and off in required time intervals.

BRIEF DESCRIPTION OF FUNCTIONS

• The timer has a total of 8 ON/OFF progr

- MANUAL ON/AUTO/MANUAL OFF modes can be used for easy control.

• 12/24 hour clock display.

• Daylight saving time function

- The random start function enables starting the appliance randomly in 10 to 32 minute intervals.

• Each configured interval (program) can be repeated on various days or groups of days, according to either of the following 15 options:

days, according to either of the following 10 options: No No Tu We Th Fr

Mo Mo, Tu, We, H, Y Tu Sa. Su

We Mo,Tu,We,Th,Fr,Sa

Th Mo,We, Fr

Fr Tu,Th,Sa

SENCOR

CZ

DIGITÁLNÍ ČASOVÝ SPÍNAČ SENCOR

Mo (16) Mo, Ta, Wb, M, Tt (6, 6t, 6t, 6t, 7t) Tu (1)(H) Sa, Su (So, Ne)

10 (31) 58, 58 (56, 196)

We (St) Mo, Tu, We, Th, Fr, Sa (Po, Ut, St, Ct, Pa, So)

Th (Ct) Mo, We, Fr (Po, St, Pa)

Fr (Pà) Tu, Th, Sa (Út, Čt, So)

Sa (So) Mo. Tu. We (Po. Út. \$f

SENCOR

SK

RIGHTLYX 1200/SPINATEN

Mo (Po) Mo, 10, M8, 11, 11 (Po, St, St, St, Ft)

We (St) Mo, Tu, We, Th, Fr, Sa (Po, Ul, St, Št, Pi, So)

Th (26) Mo. Wn. Fa (Dr. St. D)

In (St) Mo, Me, PI (Po, St, PI)

Fr (Pi) Tu, Th, Sa (Ut, St, So)

Sa (So) Mo, Tu, We (Po, Ut, \$

Sa	Mo,Tu,We
Su	Th,Fr,Sa

Mo, Tu, We, Th, Fr, Sa, Su Mo, We, Fr, Sa

START-UP

1. Insert the timer into an outlet with 220 to 240 V

2. Allow the memory backup battery to charge for about 12 hours

3. Press MASTER CLEAR to reset the timer after charging. To press this button.

use a sharp object – for example a pen or pencil.

1. The SST 13D timer is now ready to be set up for use.

SETTING THE PRECISE TIME

1. Press and hold CLOCK and at the same time, press WEEK repeatedly until the

current day is displayed. Press HOUR and MINUTE similarly to set the current

time. Holding down WEEK, HOUR or MINUTE will make the value on the displa

change faster

1. Release both buttons. The day of the week and current time will be set.

2. Repeat the previous steps to correct the time, if necessary

PROGRAM SETTINGS

1. Press the TIMER button and release. You may now program the switch ON

function for the first interval

1. Press WEEK to set the day or group of days. Set the start-up time by pressing

the HOUR and MINUTE buttons.

Su (Ne) Th, Fr, Sa (Čt, Pá, So)
Mo, Tu, We, Th, Fr, Sa, Su(Po, Út, St, Čt, Pá, So, Ne)	Mo, We, Fr, Sa (Po, St, Pá, So)

LVEDENÍ DO PROVOZU

68 (No) 11, 11, 68 (No, 11, 68)

Mo, Tu, We, Th, Fr, Sa, Su | Mo, We, Fr, Sa (Po, St, Pi, So)

(Po, Ut, St, St, Pi, So, Ne)

LVEDENIE DO PREVÁDZKY

1. Press TIMER again to complete the switch ON configuration and continue on to setting the switch OFF function. Set the first interval for the switch OFF function in the same manner as in point 2.

2. Press TIMER again to complete the switch OFF configuration and continue on

to setting the switch ON function for the second interval. Repeat points 2 and 3

to program the remaining intervals.

1. Press CLOCK once you are finished programming. The timer is now ready for

operation.

The Ground Truth image displays a single, solid horizontal line. According to Rule 2 (UNDERSCORE & LINE RULES), this is a stylistic or background line, not a placeholder underscore. Therefore, the OCR result must ignore it and output nothing or only meaningful text. The provided OCR content is "____", which consists of four underscores. This is an incorrect interpretation of the line as a placeholder, violating the rule that stylistic lines must be ignored. The OCR has hallucinated underscores where none should exist based on the GT's visual context. Hence, the OCR result is inconsistent with the Ground Truth.

EXAMPLE: We need the timer to switch ON at 6:15 AM and OFF at 10:15 PM

everyday.

a. Press the TIMER button, 1_ON will be displayed (start time).

b. Press WEEK repeatedly until the display shows "MO, TU, WE, TH, FR, SA, SU."

c. Press HOUR until the display shows 6:00 PM or 18:00.

d. Press MINUTE until the display shows 6:15 PM or 18:15.

e. Press the TIMER button again. 1 OFF will be displayed (stop time).

f. Repeat points c. and d. until the display shows 10:15 PM or 22:15.

g. Press "RES/RCL" to delete or recall programs.

1. First instance of the interplay with

TIP: While reviewing your programs, make sure the configured intervals do not

overlan each other (particularly if you use the repeat function for groups of days

and up each other (perception) if you see the replacement for groups of days in a week).

(1 a week).

[Non-Text]

[Non-Text]

[Non-Text]

____

,MO, TU, WE, TH, FR, SA, SU ^a (Po, Ut, St, Ct, Pa, So, Ne).

2.1.3.4.5.6.7.8.9.10.11.12.13.14.15.16.17.18.19.20.21.22.23.24.25.26.27.28.29.30.31.32.33.34.35.36.37.38.39.40.41.42.43.44.45.46.47.48.49.50.51.52.53.54.55.56.57.58.59.60.61.62.63.64.65.66.67.68.69.70.71.72.73.74.75.76.77.78.79.80.81.82.83.84.85.86.87.88.89.90.91.92.93.94.95.96.97.98.99.100

10, WE, TH, FR, SK, SD (FO, DI, SI, SI, FI, SO, NE).

c. Stacie bacilo Hook (Hodna), Kymi sa na displej nezconazi 0,00-ml alebo 49,00

18.00. d. C6n3t4 fi4id4e MNUUTF (Mio(3t) - h/m as so disclill panahmi 6:45PM rishe

d. Stacie Iacolo MINOTE (minuta), kym sa na displeji nezobrazi 6.15PM alebo 4245

16:15.

e. Stacle znovu tácidlo TIMER. Na displeji sa zobrazi 1_OFF (cas vypnutia).

1. Opakuje body c. a d., kym sa na displeji nezobrazi 10:15PM alebo 22:15.

TIP. Estimated (1) and (2) are estimated

TIP: Pri kontrole programov sa presvedcle, ze sa nastavene casove intervaly

the ON/AUTO/UFF button is used MANUAL ON - outlet always on

- MANUAL ON - outlet always on MANUAL OFF - outlet always of

- MANUAL OFF - outlet airways of AUTO

- AUTO – outlet switches according to the programs configured. 2. When switches from MANUAL to AUTO made, the time will be

1. When switching from MANUAL to AUTO mode, the timer will keep its settings

until one of the configured programs becomes active.

RANDOM FUNCTION

1. Press RANDOM while in AUTO mode. The display will show RANDOM

2. When this RANDOM function is active, the timer will randomly start in 1

3. When the TV is still known to be above, this other is randomly given in 32 minute intervals between 0:00 PM and 0:00 AM.

2 minutes intervals between 0.05 Y and 0.05 AM, activate the function by focusing RANDOM origin

1. Deactivate the function by pressing RANL

12/24 HOUR CLOCK DISPLAY

Press CLOCK and TIMER simultaneously to toggle between the 12 and 24 hour

clock display.

DAYLIGHT SAVING TIME (SUMMER TIME)

DATELIGHT SAVING TIME (SOMMER TIME)

1. Press CLOCK and UN/ADUTO/OFF simultaneously while in ADTO mode. The

LCD will show SUMMER.

1. The clock will be set forward by one hour.

2. Press the two buttons again to return to winter time.

[Non-Text]

[Non-Text]

[EMPTY]

REŽIMY MANUAL ON/AUTO/MANUAL OFF

(STÁLE ZARNUTO/AUTOMATICKÝ PROVOZ/STÁLE VYRNUTO)

(STALE ZAFNUTO/AUTOMATICRY PROVOZ/STALE VTFNUTO)

cyklickemu prepinani technos rezimu situizitaciobos UN/ADTO/OFF.

- MANUAL ON – zásuvka je stale zapruta

- MANUAL OFF – zásuvka je stale vypnuta

- AUTO – zasuvka je spinana podie nastavenych programu

Operating temperature -10 to 40°C

Operating temperature -10 to 40 °C January 1/4 min

Accuracy +/-1 minute per month Battery: Ni-Mb 1.2 V >100 hours

Backup battery

WARNING

- If the display does not show any information, connect the SST 13D into a 230 V

outlet and allow the device to chame. The time will be shown on the display after

about 2 hours – the backup battery is fully charged after 12 hou

• Do not plug in appliances with current loads exceeding 16 A.

• Always make sure the plug of the appliance is fully inserted into the timer outlet

• To clean the timer, unplug from power and wipe using a dry cloth.

• DO NOT IMMERSE THE TIMER IN WATER OR OTHER LIQUIDS

• Heating units and similar appliances should not be left unstended during

Heating units and similar appliances should not be left unchallenged during operation. The manufacturer does not recommend such appliances be connected

to timers.

• Do not leave electrical appliances plugged in unattended.

• The appliance shall not be used by persons (including children) with impaired

The appliance chain has used by persons (including children), with impaired physical, sensory, or mental abilities or lack of experience and knowledge.

provided they have not been trained to use the appliance by a party responsible

for their safety

• Make sure child

Make sure children do not contain what do provide.

In the case of the first time, H_2 is a result of that.

Mo (Po) Mo, Tu, We, Th, Fr (Po, Wt, Sr, Cz, Pi)

Tu (Wt) | Sa, Su (So, Ni)

Wie (Sr) Mo Tu We Th Fr Sa (Po Wt Sr Cz

Wc (G) Wc, Tu, We, Th, H, Gu

Th (Cz) Mo, We, Fr (Po, Sr, Pi)

Fr (Pi) Tu, Th, Sa (Wl, Cz, So)

Sa (So) Mo. Tu. We (Po. Wt. Šr

(neutol - vasamapig)

ÜZEMBE HELYEZÉS

(Po, Mt, Sr, CZ, Pi, So, Ni)

URUCHOMIENIE

1. In particular, there are two superimposed items: a series of three types of property and a pokuty.

The following described information in this section is to be subject to

Ozemi hometresel = 10.68-145 °C kozor Baptosis: +1 pachlan

Pomlossag +i-1 perchidonap Akkureuliter Ni Nb 1.3 V, >100 arc

Akkumulator N-MWHT,2 V, >100 cta

CZAS LETNI 1. What is AUTO set/sil in the whole project CLOCK on ON/AUTO/SEE No