SMP 9003 PRO - Uncategorized SENCOR - Free user manual and instructions

Product Type	Steam Mop
Brand	Sencor
Model	SMP 9003 PRO
Color	White/Blue
Dimensions (L x W x H)	30 x 20 x 120 cm
Net Weight	2.5 kg
Power Supply	220-240 V ~ 50/60 Hz
Power Consumption	1500 W
Water Tank Capacity	400 ml
Heating Time	Approx. 30 seconds
Steam Temperature	Up to 100 °C (212 °F)
Steam Control	Adjustable steam output
Continuous Steam	Yes, up to 20 g/min
Cleaning Pad Type	Microfiber (washable)
Swivel Head	Yes, 180° rotation
Automatic Shut-Off	Yes, after 8 seconds of inactivity
Safety Lock	Child safety lock on trigger
Maintenance	Descale regularly with vinegar solution
Accessories Included	Refill cup, 2 washable pads
Spare Parts	Replacement pads (SMP PADS Series)
Repairability	Repairable by authorized service center
Warranty	2 years

Frequently Asked Questions - SMP 9003 PRO SENCOR

How do I fill the water tank?

Remove the water tank from the mop head and open the cap. Use the refill cup to fill with tap water up to the MAX line. Do not exceed the maximum level.

Can I use distilled water?

Yes, distilled or demineralized water is recommended to reduce scale buildup. Tap water can be used but may require more frequent descaling.

How long does it take to heat up?

The steam mop heats up in approximately 30 seconds. The indicator light will turn off when it's ready.

Can I use the steam mop on all floor types?

This steam mop is suitable for sealed hard floors such as tile, laminate, vinyl, and hardwood. Do not use on unsealed wood or carpet.

How do I adjust the steam output?

Use the steam control slider on the handle. Slide forward for more steam, backward for less. You can also use the continuous steam lock for effortless cleaning.

How often should I replace the cleaning pad?

Replace the microfiber pad when it becomes worn or stained. Typically, a pad lasts for 50-100 washes. It is recommended to have at least two pads to rotate.

How do I descale the steam mop?

Mix a solution of 1 part white vinegar to 3 parts water. Fill the tank, heat up, and steam onto a cloth until tank is empty. Rinse with clean water afterwards. Descale every 1-2 months.

What should I do if the steam stops?

First, check if the water tank is empty. If full, the unit may need descaling due to mineral buildup. Also ensure the pad is not overly saturated. If problem persists, contact service.

Is there a safety auto shut-off?

Yes, the steam mop has an automatic shut-off feature that activates after 8 seconds of non-use (when left upright). It resumes heating when moved.

Can I use cleaning chemicals in the tank?

No, do not add any detergents, scents, or chemicals to the water tank. Only water or a vinegar descaling solution is allowed. Chemicals may damage the unit.

USER MANUAL SMP 9003 PRO SENCOR