ETF 90 Heat BlackLine - Tumble drier ECG - Free user manual and instructions
Find the device manual for free ETF 90 Heat BlackLine ECG in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Tumble drier |
| Model | ETF 90 Heat BlackLine |
| Brand | ECG |
| Category | Tumble drier |
| Capacity | 9 kg |
| Drying system | Heat pump condenser |
| Dimensions (H × W × D) | 850 × 600 × 600 mm |
| Weight | 45 kg |
| Power consumption | 1800 W |
| Energy class | A++ |
| Noise level | 65 dB |
| Number of programs | 16 |
| Drying levels | Cupboard dry, iron dry, extra dry |
| Special programs | Wool, delicates, sport, quick 60 min, shirts |
| Features | Sensor drying, anti-crease, delay start up to 24h |
| Display | LED |
| Door | Reversible |
| Filter | Lint filter, condenser filter |
| Safety | Child lock, overheat protection, door lock |
| Maintenance | Clean lint filter after each use; clean condenser monthly |
| Spare parts | Lint filter, condenser filter, drain hose, door hinge |
Frequently Asked Questions - ETF 90 Heat BlackLine ECG
How to clean the lint filter?
Clean the lint filter after every drying cycle. Pull it out from the door opening, remove lint, and rinse if necessary. Let dry before reinserting. A clogged filter can extend drying time and may cause overheating.
What is the maximum load?
The maximum load is 9 kg for cotton programs. For delicates and synthetics, reduce to half. Overloading can lead to poor drying results and longer cycles.
How to set a delay start?
Select your program, then press the Delay Start button until the desired delay time appears (1-24 hours). Press Start/Pause. The dryer will begin after the set delay.
What does error code E01 mean?
Error code E01 indicates water container full or drainage issue. Empty the water container if present, or check the drain hose for blockages. Ensure the hose is properly connected.
Can I dry wool items?
Yes, use the Wool program designed for machine-washable wool. Do not overheat; remove promptly to prevent wrinkles. Do not use with non-machine-washable wool.
How to clean the condenser?
Turn off and unplug the dryer. Locate the condenser unit (usually behind a flap at the bottom front). Remove and rinse with water. Use a brush if needed. Allow to dry thoroughly before reinstalling. Clean monthly for efficient drying.
Why is drying time too long?
Possible causes: overloaded drum, clogged lint filter or condenser, incorrect program selection, or high moisture content in clothes. Check filter, reduce load, and select appropriate program. If persists, check ventilation.
How to reverse the door?
The door is reversible. Unscrew the hinge screws, remove the door, and reattach on the opposite side. Refer to the user manual for detailed steps. Ensure screws are tightened securely.
Is this dryer vented or condenser?
It is a heat pump condenser dryer. No external venting required. Water is collected in a tank or drained via hose. Heat pump technology is energy-efficient.
How to install the drain hose?
Connect one end to the dryer's water outlet at the back, and the other end to a floor drain or sink. Ensure no kinks. If using the water tank, empty it after each cycle. The drain hose allows continuous drainage.
User questions about ETF 90 Heat BlackLine ECG
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Tumble drier in PDF format for free! Find your manual ETF 90 Heat BlackLine - ECG and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ETF 90 Heat BlackLine by ECG.