AMTL-2 - Dishwasher Hobart - Free user manual and instructions

Product Type	Undercounter Dishwasher
Brand	Hobart
Model	AMTL-2
Dimensions (W x D x H)	24 in x 30 in x 34 in (610 x 762 x 864 mm)
Weight	160 lbs (73 kg)
Electrical Supply	208-240V, 60Hz, 30A, 1-phase
Water Consumption	1.5 gallons per cycle (5.7 L)
Cycle Time	90 seconds (chemical sanitizing)
Rack Size	20 in x 20 in (508 x 508 mm)
Max Glass Height	12 in (305 mm)
Sanitization Method	Chemical sanitizing
Pump Motor	1 HP
Control System	SmartConnect with WiFi
Key Features	Automatic fill, wash, rinse, and sanitize cycles
Construction	Stainless steel interior and exterior
Door Type	Hinged, with door interlock safety switch
Approvals	NSF, UL, CSA
Warranty	1 year parts and labor
Country of Manufacture	USA
Intended Use	Commercial kitchens, bars, restaurants

Frequently Asked Questions - AMTL-2 Hobart

How do I connect the AMTL-2 to WiFi?

Use the SmartConnect app. From the Manager Menu, select WiFi > Connection Assistant > Search Network. Follow the prompts to connect. Alternatively, generate an access code from the menu and enter it in the app.

What is the cycle time for a full wash?

The standard cycle takes approximately 90 seconds including wash, rinse, and chemical sanitization stages. Cycle time may vary based on water temperature and settings.

How should I clean the dishwasher interior?

Daily: Remove debris from sump strainer and wipe interior with a damp cloth. Weekly: Run a cycle with delime solution to prevent scale buildup. Always follow manufacturer recommendations for cleaning agents.

What type of detergent is recommended?

Use a low-foaming, commercial grade detergent and rinse aid designed for chemical sanitizing dishwashers. Hobart recommends using products from approved suppliers for best results.

What do error codes mean?

Error codes are displayed on the control panel. Common codes: E01 (low water temperature), E02 (drain issue), E03 (sanitizer dispenser problem). Refer to the manual for full list and troubleshooting steps.

What are the installation requirements?

The dishwasher requires a 208-240V, 30A, 1-phase electrical supply, a hot water line (140°F-160°F), and a drain line. Ensure proper ventilation and clearance for door opening. Professional installation by a qualified technician is recommended.

How do I change the rack type?

The AMTL-2 accepts standard 20x20 inch racks. To change, open the door, pull out the existing rack, and slide in the new one. Ensure the rack is fully seated in the tracks.

How often should I descale the machine?

Descaling frequency depends on water hardness. For typical conditions, perform a descale cycle every 3-6 months using a commercial deliming solution. More frequent descaling may be needed with hard water.

What is the warranty coverage?

The standard warranty covers one year on parts and labor. Extended warranty options are available. Contact Hobart or your dealer for details.

How do I replace the drain pump?

Disconnect power and water. Remove the front panel and locate the drain pump under the machine. Disconnect wiring and hoses, then unbolt the pump. Install the new pump in reverse order. Always use genuine Hobart parts.

USER MANUAL AMTL-2 Hobart

Download on the App Store

GET IT ON Google Play

Download the app

HOBART

SMART CONNECT

2

Create your user account

3

Icon of a hand pointing to a speech bubble with lines, set against a dark gray background (no text or symbols)

Use the connection assistant to connect to WiFi

Manager Menu WiFi Connection Assistant Search Network

4

Get access code

Manager Menu ← WiFi Access Code

5

Connect to machine with code

Get help with getting connected and using the app, and watch training videos at https://www.itwfoodequipment.com/smartconnect365/help

F48536 (07/21) ©2021 ITW