LXNR-2 - Dishwasher Hobart - Free user manual and instructions
Find the device manual for free LXNR-2 Hobart in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Commercial Dishwasher |
| Model | LXNR-2 |
| Brand | Hobart |
| Dimensions (W x D x H) | 24 x 29 x 32 inches |
| Weight | 150 lbs |
| Power Supply | 120V, 60Hz, 20A |
| Water Supply | 120°F (49°C) min, 20-60 psi |
| Wash Cycles | Prewash, Wash, Rinse, Sanitize |
| Cycle Time | Approximately 120 seconds |
| Rack Size | 20 x 20 inches |
| Drain Connection | 2 inch gravity drain |
| Construction | Stainless Steel |
| Controls | Electromechanical with push buttons |
| Safety Features | Door interlock, high temperature limit, overflow protection |
| Certifications | NSF, UL, CSA |
| Maintenance | Clean spray arms, descale every 3 months, check drain strainer daily |
| Spare Parts Available | Wash arms, pumps, thermostats, door gaskets, control boards |
| Reparability Index | High - modular design with accessible components |
| Warranty | 1 year parts and labor |
| Energy Star Rated | Yes |
Frequently Asked Questions - LXNR-2 Hobart
What is the recommended water temperature for the Hobart LXNR-2?
The recommended incoming water temperature is at least 120°F (49°C) for optimal cleaning and sanitization.
How do I clean the spray arms on my LXNR-2?
Remove the spray arms by unscrewing the center nut. Soak them in a vinegar solution for 30 minutes to remove mineral deposits, then rinse and reinstall.
What does the error code E1 mean on the Hobart LXNR-2?
Error code E1 indicates a water fill issue. Check that the water supply valve is open and the inlet screen is clean. If the problem persists, inspect the fill solenoid valve.
How often should I descale the dishwasher?
Descaling should be performed every 3 months or more frequently in hard water areas. Use a commercial descaling solution recommended for Hobart dishwashers.
Can I use regular dish soap in the Hobart LXNR-2?
No, use only commercial low-foaming detergent and rinse aid designed for dishwashers. Household soap will cause excessive foaming and poor cleaning.
What is the cycle time for a full wash?
A complete cycle (prewash, wash, rinse, sanitize) takes approximately 120 seconds. This may vary based on water temperature and machine settings.
How do I reset my Hobart LXNR-2 dishwasher?
To reset, turn off the power at the circuit breaker for 30 seconds, then restore power. If the machine has a manual reset button (usually on the control panel), press it after power-up.
What is the correct procedure for shutting down the machine for the night?
First, clean the drain strainer and spray arms. Then close the door, and turn off the power at the main switch. If not used for extended periods, also shut off the water supply.
Why is my LXNR-2 leaving water spots on dishes?
Water spots are usually caused by hard water or low rinse temperature. Check the rinse aid dispenser and ensure the final rinse water is at least 180°F (82°C). Adjust the water softener if installed.
Where can I download a replacement manual for the Hobart LXNR-2?
You can download a free PDF manual from notice-facile.com or from the official Hobart website. Enter your model number LXNR-2 to access the correct documentation.
User questions about LXNR-2 Hobart
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Dishwasher in PDF format for free! Find your manual LXNR-2 - Hobart and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. LXNR-2 by Hobart.
USER MANUAL LXNR-2 Hobart
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Hobart
Model : LXNR-2
Category : Dishwasher