AM16VL-ADV - Dishwasher Hobart - Free user manual and instructions
Find the device manual for free AM16VL-ADV Hobart in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Commercial Undercounter Dishwasher |
| Model | AM16VL-ADV |
| Brand | Hobart |
| Dimensions (W x D x H) | 762 x 762 x 1400 mm |
| Weight | 100 kg |
| Power Supply | 380-415V / 3-phase / 50-60 Hz |
| Tank Capacity | 16 L |
| Wash Cycles | Normal, Heavy, Rinse Only |
| Cycle Time | 90 seconds |
| Water Consumption per Cycle | 2.5 L |
| Heating Element Power | 6 kW (electric) |
| Drain Pump | Built-in |
| Material | Stainless steel interior and exterior |
| Safety Features | Door interlock, overflow protection |
| Noise Level | < 70 dB |
| Spare Parts Availability | From authorized Hobart dealers |
| Maintenance | Daily cleaning of filters and spray arms |
Frequently Asked Questions - AM16VL-ADV Hobart
How do I install the Hobart AM16VL-ADV dishwasher?
Ensure proper electrical and plumbing connections. The unit requires a 380-415V 3-phase power supply and a dedicated water line with a pressure of 20-40 psi. Level the machine using the adjustable feet. Refer to the installation manual for detailed steps.
How do I start a wash cycle?
Load the dishwasher, close the door securely, and select the desired cycle (Normal, Heavy, or Rinse Only) using the control panel. Press the Start button. The cycle will begin automatically.
How often should I clean the filters?
Filters should be cleaned daily to prevent clogging. Remove the filter basket, rinse under running water, and scrub with a soft brush if necessary. Ensure filters are properly reinstalled before use.
What type of detergent should I use?
Use a commercial dishwasher detergent designed for high-temperature machines, such as a low-foaming chlorinated or non-chlorinated powder or liquid. Follow the manufacturer's dosage recommendations.
What should I do if the dishwasher does not fill with water?
Check that the water supply valve is open and the inlet hose is not kinked. Verify that the door is fully closed and the interlock is engaged. If the problem persists, inspect the water inlet valve for blockages or electrical faults.
How do I descale the dishwasher?
Use a commercial descaling solution specifically for dishwashers. Run an empty cycle with the descaling agent in the detergent compartment. Follow the product instructions and rinse with a clear cycle afterward.
What do error codes mean?
Refer to the user manual error code table. Common codes include E1 (water fill failure), E2 (heating issue), E3 (drain problem). If an error appears, note the code and contact your Hobart service agent.
Why won't the door close properly?
Check if the door gasket is clean and free of debris. Ensure that the racks are not overfilled and items are not blocking the door. Adjust the door latch if necessary. If the problem persists, the hinge may need adjustment.
How do I adjust the rinse aid setting?
Locate the rinse aid dispenser inside the door. Adjust the dial to a higher setting for more drying aid or lower for less. Typically, a setting of 3-4 is suitable for most conditions.
What is the warranty coverage?
Hobart offers a standard warranty for the AM16VL-ADV. Coverage includes parts and labor for defects in materials and workmanship for a specific period (e.g., 1 year). Extended warranties are available. Contact Hobart for exact terms.
User questions about AM16VL-ADV Hobart
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Dishwasher in PDF format for free! Find your manual AM16VL-ADV - Hobart and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. AM16VL-ADV by Hobart.
USER MANUAL AM16VL-ADV Hobart
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Hobart
Model : AM16VL-ADV
Category : Dishwasher